How to Turn Off the Rear Window Wiper on the Tiguan?

What is the fuel consumption of the Tiguan L?

The Tiguan L currently has 6 models on sale. Among them, four models including the 2022 330TSI Automatic Two-Wheel Drive Comfort Edition and the 2022 330TSI Automatic Two-Wheel Drive Premium Edition, equipped with a 186-horsepower engine, have an NEDC fuel consumption of 6.6L per 100 kilometers. Two models, such as the 2022 380TSI Automatic Four-Wheel Drive R-Line Premium Edition 7-Seater, equipped with a 220-horsepower engine, have an NEDC fuel consumption of 7.7L per 100 kilometers. The fuel tank capacity varies among different Tiguan L models. The distance that can be covered with a full tank of fuel is as follows: Models equipped with a 186-horsepower engine have a fuel tank capacity of 60L, allowing a distance of 60/6.6*100=909KM on a full tank. Models equipped with a 220-horsepower engine have a fuel tank capacity of 62.5L, allowing a distance of 62.5/7.7*100=812KM on a full tank. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase fuel consumption include: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not easing off the throttle before a red light, can increase fuel consumption. The car itself: Cars with larger engine displacements generally consume more fuel than those with smaller displacements because larger displacements usually mean higher power, requiring more gasoline for combustion. Heavier cars also consume more fuel because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases the car's resistance and fuel consumption. Low environmental temperatures: When the engine block is cold, the injected gasoline does not atomize easily, requiring more gasoline for combustion, thus increasing fuel consumption. Additionally, at low temperatures, the engine's computer may control the engine to run at higher RPMs to warm up, which also increases fuel consumption.

3

0

Share

What are the reasons for the engine warning light in the Baojun 510?

Sensor malfunctions, engine misfire, vehicle maintenance issues, fuel quality problems, poor mixture combustion, engine intake issues, turbocharging problems, exhaust system faults, and anti-theft system failures are the main causes of the engine warning light illuminating. Additionally, during vehicle startup, the system performs a self-check on the engine. Normally, the warning light should turn off after the self-check. If it remains lit for an extended period, promptly visit a repair station for professional assistance to diagnose and eliminate potential hazards. Below is a detailed explanation of each fault: Sensor Issues: Sensors such as coolant temperature, crankshaft position, air flow, intake temperature, and oxygen sensors may become damaged, have poor connections, or lose signal transmission. This prevents the ECU from accurately obtaining engine data, triggering the warning light. Solution: Seek immediate professional inspection at a repair center to address safety risks. Maintenance Issues: Poor engine maintenance is the most common cause of the warning light. Vehicles have specific maintenance schedules. Neglecting maintenance and poor driving habits increase engine strain, eventually triggering the warning light. Solution: Follow the maintenance schedule in the vehicle’s manual for timely, comprehensive servicing to rule out non-maintenance-related issues. Fuel Quality Issues: This refers to both fuel and engine oil. Vehicles require specific fuel grades and oil types (semi-synthetic or full synthetic). Using incorrect specifications long-term can cause engine wear and trigger the warning light. Solution: Use the recommended fuel grade and engine oil type for your vehicle. Poor Mixture Combustion: Faulty spark plugs, fuel pump issues, or clogged fuel lines can lead to poor combustion, causing carbon buildup or engine knocking. The oxygen sensor detects these issues, prompting the ECU to illuminate the warning light. Intake Issues: Engine combustion requires proper airflow. A dirty or clogged air filter disrupts intake, potentially causing blockages and triggering the warning light. Solution: Regularly clean or replace the air filter to ensure proper intake system operation. Turbocharging Issues: Problems with the intake turbo piping or turbocharger (e.g., leaks, excessive oil consumption, power loss, unusual noises, or smoke) can trigger the warning light. Solution: Visit a 4S shop to inspect and replace the turbocharger if necessary, as repairs are often impractical. Exhaust Issues: Faults in the rear oxygen sensor, catalytic converter, exhaust camshaft, or bearings—especially catalytic converter damage due to impact or fuel system issues—can trigger the warning light. Solution: Maintain and clean the catalytic converter using lead- or silicon-based lubricants. Anti-Theft System: If the electronic anti-theft system malfunctions or conflicts with the engine ECU, the engine may fail to operate normally, and the warning light may illuminate. Solution: Professional diagnosis and repair are required; individual fixes are not feasible. Engine Misfire: One or more cylinders failing to operate properly can cause power loss, hard starts, or unstable idling. Solution: Identify and replace faulty cylinder components. For internal mechanical damage, seek professional engine overhaul.

6

5

Share

What are the reasons for the Isuzu 4JB1 engine frequently overheating?

The reasons for overheating: Common causes of engine overheating or even "boiling over" include damage to electronic components in the cooling system (thermostat, cooling fan), poor radiator heat dissipation, insufficient coolant, etc. Here are the related details: Solutions: Check if the lack of antifreeze is causing the engine to overheat, and inspect the coolant circulation for any blockages. Additionally, you can examine the water temperature sensor, water pump, thermostat, and cooling fan, as any of these could lead to overheating. If these issues are present, it is recommended to visit a repair shop immediately for maintenance.

8

5

Share

Why doesn't the fan run after some cars are turned off?

Whether the fan runs after the engine is turned off depends on the coolant temperature at shutdown. It's normal for some vehicles' fans not to operate after turning off, indicating the coolant hasn't reached extremely high temperatures. Here's relevant information: Other situations: Continuous fan operation indicates engine overheating. Common causes for overheating include damaged cooling system components (thermostat, cooling fan), poor radiator performance, or insufficient coolant. Check if low antifreeze level is causing high engine temperature, and verify proper coolant circulation.

16

2

Share

Does water reaching the seat level affect a small car?

Water reaching the seat level does affect a small car. Here are specific impacts after a vehicle is waterlogged: 1. Component rust: Water immersion can easily cause body components to rust, shortening the vehicle's lifespan and reducing safety performance. 2. Short-circuit stalling: Waterlogged vehicles may experience wire corrosion and rusting, leading to sudden stalling or spontaneous combustion due to short circuits while driving. 3. Expensive repairs: The repair costs for water-damaged vehicles are extremely high. In cases of severe water intrusion, repair expenses may exceed 50% of the vehicle's original value.

5

Share

Is Paintless Dent Repair Really That Good?

Paintless dent repair (PDR) has advantages such as preserving the original car paint. Here are the benefits of paintless dent repair for vehicles: 1. Preserving original paint: PDR technology uses professional techniques and efficient processes to maintain the original appearance of the car paint, thereby preserving and reflecting the vehicle's original value. 2. Short repair time: The PDR technology typically takes about 15 to 90 minutes to repair a single dent. 3. Convenient operation: PDR primarily uses specialized custom repair tools for operations. With a portable power source or access to electricity, it can be performed at any location.

5

0

Share

How to Turn Off the Rear Window Wiper on the Tiguan?

What is the fuel consumption of the Tiguan L?

What are the reasons for the engine warning light in the Baojun 510?

What are the reasons for the Isuzu 4JB1 engine frequently overheating?

Why doesn't the fan run after some cars are turned off?

Does water reaching the seat level affect a small car?

Is Paintless Dent Repair Really That Good?

Which corner of the garage is visible in the right rearview mirror during right reverse parking?

Is D the Forward Gear or the Reverse Gear?

What is the optimal installation position for ETC?

How Serious Is the Issue of Oil on Spark Plugs?