How to Turn Off the Rear Window Wiper of Lian Dong Yun?

Is driving at 105 km/h in a 100 km/h speed limit considered speeding?

Driving at 105 km/h on a highway with a 100 km/h speed limit is considered speeding. Here are some relevant details about highway speeding: Speeding: Driving at 105 km/h in a 100 km/h zone means you are exceeding the speed limit by 5%. According to traffic regulations, this will not result in any penalties, as the rules clearly state that exceeding the speed limit by less than 10% only warrants a warning. Therefore, exceeding by 5% will result in a warning but no points deduction or fine. Speedometer Measurement: Regarding speed measurement, the speedometer is required by regulation to display a speed not less than the actual speed. As a result, car manufacturers adjust the displayed speed to be slightly higher, typically by 3 to 14 km/h. Whether 105 km/h is considered speeding depends on the specific vehicle. It is best to rely on the speedometer—if it does not exceed the posted speed limit, the actual speed will also not exceed it. Additionally, the speed displayed by radar detectors ("electronic dogs") or the vehicle's built-in navigation system may differ, but they generally follow the same principle as the speedometer.

12

2

Share

Is There an Imported Version of the Volkswagen Tiguan?

There is an imported version of the Volkswagen Tiguan. Below is an introduction to the Tiguan: Exterior: It adopts Volkswagen's latest family design language, featuring an inverted trapezoidal grille and newly designed LED headlights. The R-line package adds a more aggressive look to the front fascia, with two air inlets on either side of the bumper. In terms of body colors: The new Volkswagen Tiguan introduces two new color options: King Red and Antelope White. It will continue to offer versions such as S, SE, SE R-Line, and SEL R-Line for selection. Powertrain: It is equipped with the current 2.0T engine, delivering a maximum power of 186 horsepower and a peak torque of 300Nm. It is paired with a 7-speed dual-clutch transmission.

8

1

Share

Where to Add Antifreeze?

The antifreeze is added to the radiator, which can be seen by opening the engine hood. The method for replacing antifreeze is as follows: Before completely replacing the antifreeze, conduct a thorough inspection to check for any signs of leakage or cracks in the pipes, with a focus on the five-way hose. Antifreeze flows through the five-way hose and is then distributed to different parts of the car to function. If there is any leakage of antifreeze in this section, replace the hose or resecure the connection as needed. Drain the old antifreeze, then flush the fluid channels with clean water. Add clean water to the antifreeze reservoir, then continue to pour water into the reservoir so that it flows continuously through the engine cooling system. Start the engine and let it idle for 3 to 5 minutes to circulate the water. Initially, the water flowing out of the reservoir will be slightly pinkish. Continue adding clean water until the water coming out is clear. Note: Don't forget to remove the heater hose and drain the water from the heater core. After draining for about an hour, add the new antifreeze through the radiator hose. Then, add another bottle of antifreeze to the antifreeze reservoir until it is nearly full. Start the engine and let it run for about 10 minutes. As some air is expelled from the cooling system, the fluid level will drop. Add more antifreeze until the reservoir reaches the maximum mark "MAXT".

8

2

Share

What is the tire brand of the Borgward BX5?

The Borgward BX5's top configuration uses Michelin tires, while the mid-to-high configurations use Giti tires. Actual fuel consumption: The 1.4T model comes with either a 6-speed manual or a 6-speed automatic transmission. The official combined fuel consumption is 5.8 liters/100 km and 6.0 liters/100 km, respectively, while the actual fuel consumption is around 9.1 liters/100 km. The 1.8T model also offers a 6-speed manual and a 6-speed automatic transmission, with official combined fuel consumption of 5.8 liters/100 km and 6.9 liters/100 km for the manual and automatic versions, respectively. Borgward BX5 fuel tank: Manufacturer data indicates a fuel tank capacity of 60 liters.

10

5

Share

What are the symptoms of insufficient gasoline pressure?

The symptoms of insufficient fuel pump pressure include the fuel pump making a "buzzing" abnormal noise. The vehicle experiences weak acceleration, especially with noticeable jerking during sudden acceleration. Difficulty starting the vehicle or failure to start may occur. The engine warning light on the vehicle's combination meter remains constantly illuminated. Below are relevant details about the fuel pump: Working principle of the fuel pressure pump: Oil pressure is regulated by the coordination between the spring and vacuum degree in the air chamber. When oil pressure exceeds the standard value, high-pressure fuel moves the diaphragm upward, opening the ball valve and allowing excess fuel to return through the return pipe. When pressure falls below the standard value, the spring presses the diaphragm to close the ball valve, stopping fuel return. The pressure regulator's function is to maintain constant pressure in the fuel circuit. Method for detecting automotive fuel pressure: Turn the ignition switch on (without starting the engine) to operate the electric fuel pump. The fuel pressure at this time should meet technical requirements, generally fluctuating around 0.3MPa.

7

2

Share

Where is the oil dipstick located in an Audi?

For Audi models equipped with an oil dipstick, the dipstick is located next to the engine and can be seen by opening the engine hood. For Audi models without an oil dipstick, the oil level is displayed electronically in the MMI system. Start the vehicle, press the 'car' button on the center console, navigate to the oil level option in the MMI menu using the center control knob, and press the knob to display the oil level. Generally, it may take two to three minutes after starting the vehicle for the level to appear. The function of the oil dipstick: To check the level of engine lubricating oil. By inspecting the oil dipstick, many engine operational dynamics can be observed, aiding in engine maintenance, timely detection of faults or issues, and preventing further deterioration of problems. It enables quick responses and accurate judgments, providing reliable data. It can be said that proper use of the oil dipstick plays a crucial role in extending the engine's lifespan. The dipstick measures the static height of the oil level, indicating whether the engine oil volume is within a reasonable range. Standard oil dipsticks have clear upper and lower limits. Ensuring the measured oil level is between these limits is sufficient, with the middle position being ideal. It's important to note that more oil is not necessarily better. Higher oil levels increase engine resistance (as the crankshaft continuously agitates the oil in the sump for splash lubrication). Ideally, maintaining the oil level slightly below the middle position minimizes engine resistance and fuel consumption while ensuring stable lubrication performance. Audi's factory-recommended oil is 5W40 grade full synthetic oil. When adding oil, ensure the amount is slightly below the dipstick's marked level.

16

0

Share

How to Turn Off the Rear Window Wiper of Lian Dong Yun?

Is driving at 105 km/h in a 100 km/h speed limit considered speeding?

Is There an Imported Version of the Volkswagen Tiguan?

Where to Add Antifreeze?

What is the tire brand of the Borgward BX5?

What are the symptoms of insufficient gasoline pressure?

Where is the oil dipstick located in an Audi?

How Often Should Engine Oil Passages Be Cleaned?

What is the maintenance interval for Cadillac?

Is the Infiniti FX35 prone to high failure rates?

What is the difference between direct injection and hybrid injection in cars?