How to turn off the rear window wiper of Audi Q3?

4 Answers
ElizaLee
07/24/25 3:47pm
Audi Q3's rear window wiper can be turned off by: 1. The wiper switch of Audi Q3 - pulling inward controls the front wiper, while pushing outward controls the rear wiper; 2. When in the rear wiper position, push it upward to turn off the rear wiper. The Audi Q3 is an SUV based on the same PQ35 platform as the Volkswagen Tiguan, with body dimensions of 4385mm in length, 1831mm in width, and 1608mm in height. In terms of appearance, the Audi Q3 is basically the same as the imported version, and the domestically produced Q3 has not been lengthened. From the interior, the Audi Q3 features ordinary black leather seats, and the steering wheel is also wrapped in black leather with silver chrome decorations.
Was this review help?
1
1
Share
McGriffin
08/10/25 7:32am
As an Audi Q3 owner who frequently drives it to commute, turning off the rear wiper is really not difficult. You just need to locate the control stalk on the right side of the steering wheel, within easy reach of the driver's left hand. There's a small ring or toggle specifically for the rear wiper – a gentle twist will switch it to the off position. I've used this feature when driving on highways in the rain; it's important to turn it off promptly after the rain stops to avoid wasting power and accelerating wiper blade wear. The rear wiper only activates automatically when reversing or at low speeds, but manual shut-off requires your own operation, with the control position being ergonomically designed. If you encounter difficulty turning it off, the wiper blade might be frozen or clogged with debris – check after parking to avoid forcing it. Overall, Audi's system is quite user-friendly and easy to master. Maintenance tip: Check the wiper fluid level monthly to ensure smooth operation.
Was this review help?
16
5
Share
Expand All
Anne
08/10/25 7:32am
To turn off the rear wiper on the Audi Q3, my driving experience prioritizes safety. When operating, wait until the car is stationary or at low speed before adjusting the control stalk next to the steering wheel—locate the top paddle and gently flick or rotate it toward the steering wheel to turn it off. I prefer to turn off the rear wiper immediately after the rain stops; otherwise, it may run dry on the road, distracting attention and increasing risks. The control stalk is well-positioned and thoughtfully designed: it typically has multiple settings—just adjust it to the 'off' indicator. During routine maintenance, after turning it off, check the wiper blade’s wear periodically, as prolonged use accelerates aging. I’ve also encountered occasional automatic activation; manually turning it off resolves the issue. The key is to develop good habits to maintain clear driving visibility. When servicing the car, lubricate the wiper mechanism to prevent unexpected jamming.
Was this review help?
15
1
Share
Expand All
VanAriel
09/25/25 7:46am
Turning off the rear wiper of the Audi Q3 is simple: operate the control lever on the right side of the steering wheel, where there's a dedicated switch or knob for the rear window. Rotate it a few times to the 'off' position and it stops. I'm familiar with this operation—just a flick and twist; the design is convenient and quick. Deactivating the rear wiper saves energy and reduces unnecessary noise. Remember to operate it in stable conditions to avoid distraction. After completion, test the front wipers to ensure synchronized normal operation. Minimize its usage to extend the wiper's lifespan.
Was this review help?
19
5
Share
Expand All
More Forum Discussions

What is the simplest and most accurate method for A2 reverse parking?

Drive the car forward until it is roughly aligned with the car in front, then adjust the right-side mirror until the right wheel is visible. Keep the steering wheel fully turned to the right and reverse slowly until the left-side mirror shows the front of the car behind; use the right-side mirror to straighten the car body. When the right-side mirror is almost parallel with the taillight of the adjacent car, straighten the steering wheel and continue reversing. Once the car is inside the parking space, press the clutch firmly, check if the rear of the car is properly positioned, then press the clutch and brake, and shift to neutral.
4
0
Share

How to Choose Between A6 and Q5?

Audi A6's front fascia is more impactful, with this generation emphasizing a sportier style, blending elements of sportiness and elegance into its composed appearance. Audi Q5's angular front-end design adopts the Q7's design language, incorporating chrome accents for a more robust and streamlined look. Audi A6's full LCD instrument cluster and large central display screen exude a sense of technological sophistication and luxurious fashion. Audi A6 is equipped with high and low power versions of a 2.0T engine, delivering stable performance on highways and during turns, paired with a 7-speed dual-clutch transmission. Since Audi Q5 replaced its 8AT with a 7-speed dual-clutch transmission, like many vehicles today, it still offers a remarkably smooth driving experience.
15
5
Share

How to Fix the AFS OFF Light?

AFS OFF light indicates that the headlight's adaptive front-lighting system (AFS) is turned off. Re-enable the AFS function. Check the AFS module, use a diagnostic scanner to match settings and clear fault codes to resolve the AFS warning light. AFS stands for Adaptive Front-lighting System. If the indicator light stays on, it means this function is currently disabled. Ensure the vehicle's power is off, then open the hood and locate the negative terminal of the battery.
11
1
Share

What is the procedure for handling a full 12-point deduction on a driver's license?

The procedure for handling a full 12-point deduction on a driver's license is to participate in a 7-day traffic safety laws, regulations, and related knowledge training within 15 days, followed by a relevant examination. Upon passing the exam, the points will be cleared, and the driver's license will be returned. Process for handling vehicle violation point deductions: Bring your ID card, driver's license, and vehicle registration certificate to the violation processing office. Take the penalty decision notice to the designated bank to pay the fine (once the penalty decision notice is printed, the fine must be paid within 15 days. After 15 days, a 3% late fee will be charged daily, with the total late fee not exceeding the total fine amount). After paying the fine and obtaining the receipt, keep the receipt properly. Check the violation information online a few days later. If the violation information disappears, the receipt can be discarded. However, if the violation information remains online, take the payment receipt to the legal department of the traffic police team to explain the situation. After confirmation by the staff, the violation information will be directly deleted.
1
5
Share

What Causes the Rear of the Car to Cross the Line During Parallel Parking?

The reason the rear of the car crosses the line during parallel parking is either starting to park too early or being too far from the line. You can drive forward a little more before stopping to ensure the car body is slightly closer to the parking space line. When parking, try to stay slightly to the right, which makes it easier to reverse into the parking space, while also paying attention to the distance between the front and rear. More details are as follows: 1. Definition of Parallel Parking: Parallel parking is part of the second subject in the driver's license test. It is increasingly common in urban areas, especially as parking spaces in formal lots become more limited. Many places now designate parking spaces along the sides of streets, creating "parallel parking spaces." 2. Changes: In the past, parallel parking used four poles placed on the ground to symbolize the four corners of the parking space. One criterion for successful parking was whether the vehicle entered the space without touching these poles. After the new traffic regulations were implemented, parallel parking no longer uses poles; instead, ground markings define the boundaries of the parking space. For students learning to drive with a C1 license, the length of the parallel parking space is 1.5 times the vehicle's length plus 1 meter. The vehicle must be driven parallel to the parking space, then reversed into the space in one continuous motion without stopping. As long as the car is parked within the boundaries without crossing the lines, it is considered a pass.
7
3
Share

What Causes Low-Speed Jerking?

Transmission jerking is the impact sensation caused by the inertia of moving parts inside the engine. Below are the reasons for engine jerking: 1. Causes of engine jerking: During the process where the engine speed is either increased or decreased, if not handled properly, sudden changes in engine speed during gear shifts can cause the inertia of the engine's moving parts to react against the vehicle body. 2. Low-speed jerking: Many drivers experience this issue. When driving at low speeds, the gear frequently shifts between first and second, and the clutch repeatedly engages and disengages. If power transmission cannot be smoothly completed within a short time, common low-speed jerking occurs. Jerking sensations are normal during startup and low-speed driving, usually due to turbocharger engagement at low RPMs, which affects engine speed. 3. Upshift jerking: This is mostly caused by the transmission's response speed being insufficiently fast. The upshift speed cannot keep up with the throttle input, so the jerking sensation occurs at the moment of gear shift. 4. Downshift jerking: This is mostly due to the intervention of the energy recovery system. Once the driver releases the throttle pedal or presses the brake pedal, the generator immediately starts working, placing additional load on the engine. This affects the engine speed, causing it to be out of sync with the clutch plate speed, resulting in a jerking sensation.
16
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.