···
Log in / Register

How to turn off the rear lights of Volkswagen Tayron?

3 Answers
StCaroline
07/29/25 2:25am
To turn off the rear lights of the Volkswagen Tayron, simply press the rear light switch. The body dimensions of the Volkswagen Tayron are: length 4589mm, width 1860mm, height 1660mm, wheelbase 2731mm, fuel tank capacity 60l, and tire specification 215/65r17. The Volkswagen Tayron is equipped with a 1.4T turbocharged engine, with a maximum power of 10 kilowatts, maximum power speed of 5000 to 6000 revolutions per minute, maximum torque of 250 Newton meters, maximum torque speed of 1750 to 3000 revolutions per minute, and is matched with a 7-speed dual-clutch transmission.
Was this review help?
4
1
Share
VanDaniella
08/12/25 12:31pm
When I'm driving my Volkswagen Tayron, I often get asked by friends how to turn off the rear lights. Generally speaking, after turning off the engine and getting out of the car, the rear taillights will automatically turn off, which is quite a thoughtful design to prevent me from forgetting to turn them off and draining the battery. But sometimes, if I accidentally turn the light switch to the parking position, the lights will stay on, and I might have to get back in the car to switch it back to the OFF position. Checking the user manual is a good idea—Volkswagen cars are similar in this regard, and the switch is usually on the center console; just turn it to solve the problem. It's a good habit to check the light status before parking to avoid small issues that can drain the battery. If you go out in the middle of the night and the battery is dead, it could be troublesome. This tip is quite practical and has saved me a lot of hassle.
Was this review help?
3
5
Share
Expand All
Laurie
10/02/25 4:09am
As someone who loves tinkering with cars, I always think about why the lights don't turn off for everyone. The rear lights of the Volkswagen Tayron should automatically turn off after the engine is shut off, but if the lights remain on, the switch might not be in the correct position—for example, the parking function might be activated. Try manually turning the switch to OFF; if that doesn't work, it could be due to a battery warning or a module malfunction. Check if the fuse is blown or take it to a 4S shop for diagnosis. I recommend keeping an eye on the battery's health regularly—don't wait until the lights stay on to take action. It might drain the battery quickly, affecting the next startup. For safety's sake, address the issue promptly to prevent a minor problem from becoming a major one. This ensures a much more worry-free driving experience.
Was this review help?
20
1
Share
Expand All
More Forum Discussions

Why does the engine warning light sometimes come on and sometimes not?

The engine warning light may illuminate for the following 7 main reasons: Sensor malfunction: This includes sensors such as coolant temperature, crankshaft position, air flow, intake temperature, and oxygen sensors. When these sensors are damaged, have poor contact, or experience signal interruption, the vehicle's ECU cannot accurately obtain engine data, triggering the engine warning light. Fuel/oil quality issues: Failure to use the fuel and engine oil specified by the manufacturer may cause engine wear, leading to the warning light activation. Poor fuel mixture combustion: Incomplete combustion can cause engine carbon buildup or knocking. When detected by oxygen sensors and reported to the ECU, the warning light will illuminate. Causes include spark plug failure, ignition coil issues, fuel pump malfunction, or clogged fuel lines. Turbocharger problems: Issues with the intake boost piping or turbocharger can trigger the warning light. Common symptoms include turbocharger damage accompanied by oil leaks, excessive oil consumption, reduced power, metallic noises, or blue/black exhaust smoke. Intake system issues: Air intake problems may lead to engine pipe blockages, potentially triggering the warning light. A dirty air filter that hasn't been regularly cleaned can cause intake problems. Exhaust system faults: Exhaust issues may also activate the warning light. Common causes include rear oxygen sensor failure, catalytic converter problems, or exhaust camshaft/bearing issues - with catalytic converter failure being most frequent. Causes include using leaded gasoline, lead/silicon-based lubricant additives, physical damage to the converter, or fuel system malfunctions. Anti-theft system malfunction: If the vehicle's electronic anti-theft system fails or the anti-theft controller doesn't match the engine ECU, the system may prevent normal engine operation while illuminating the warning light. When the engine warning light appears, follow these steps: First check if the engine is operating normally - look for vibrations, black smoke, etc. If present, avoid restarting the engine. Note: Never restart if the red warning light is on. If the engine can start, turn it off for 5-10 minutes. Without pressing the brake, press the start button once or turn the key halfway to the ON position (without depressing the clutch). The vehicle will perform a self-diagnostic check - observe if the warning light turns off after 5-10 seconds. If the light remains on, visit a service center promptly. Technicians can use diagnostic tools to read trouble codes and perform targeted repairs.
2
3
Share

What is a car DSP?

Automotive DSP, the full name is Digital Audio Processor. DSP is the abbreviation of Digital-Signal-Processing in English, which translates to: digital signal processing. The following is a detailed introduction to DSP: 1. The function of DSP is to control frequency response, and it can process and modify audio signals to a certain extent. It can be understood this way: music is an audio signal, audio signals come from car head units, CD players, navigation systems, etc. The audio signal is played through the amplifier from the speakers, and it needs to be modified by the DSP in between. If the audio source is the first step and the amplifier is the last step, then the DSP is in between the two. 2. However, it should be noted that even though DSP can "modify" sound, if the original sound quality is poor, no amount of "modification" will make a significant difference. Therefore, don't expect that installing a DSP will make the sound comparable to those top-brand audio systems.
5
1
Share

When Will China IV Emission Standard Be Implemented?

China IV emission standard was originally scheduled to be implemented on January 1, 2010. For diesel vehicles over 3.5 tons, the China IV standard was postponed for two years; for diesel vehicles under 3.5 tons, it was delayed for three years, with the China IV standard being implemented on July 1, 2013. Introduction to China IV Emission Standard: 1. The China IV emission standard is the fourth stage national standard for motor vehicle pollutant emissions. 2. The main pollutants emitted by vehicles include HC (hydrocarbons), NOx (nitrogen oxides), CO (carbon monoxide), PM (particulate matter), etc. Through the application of technologies such as improved catalytic converter active layers, secondary air injection, and exhaust gas recirculation systems with cooling devices, the standard aims to control and reduce vehicle emissions below specified limits. 3. The "Standardization Law of the People's Republic of China" categorizes Chinese standards into four levels: national standards, industry standards, local standards (DB), and enterprise standards (Q/). As of the end of 2003, China had a total of 20,906 national standards (excluding engineering construction standards).
16
3
Share

What is the fuel consumption of the Jetta VS5 manual transmission?

The comprehensive fuel consumption of the Jetta VS5 manual transmission is 6.2L/100km. Currently, there are 5 models of the Jetta VS5 manual transmission available for sale, including the Manual Yuexiang Pro and Manual Jinqu Pro, with a comprehensive fuel consumption of 6.2L/100km. The above figures are based on the NEDC comprehensive fuel consumption, which is the fuel consumption data measured under the NEDC test procedure. The actual fuel consumption is higher than this value, ranging from 7.8-8.2L/100km. Here are 5 tips to help reduce fuel consumption while driving: When starting the vehicle, use a low gear, gently press the accelerator, and accelerate slowly. Avoid suddenly pressing the accelerator hard, as this can multiply fuel consumption. Light acceleration, light braking, and early braking: While driving, gently press the accelerator to avoid sudden increases in engine RPM and prevent the car from shaking during operation, thus making the car more fuel-efficient. By anticipating road conditions and applying slow and even acceleration or braking, fuel economy can be improved by up to 20%. Maintain proper tire pressure: Keep tire pressure at the level recommended by the manufacturer. For every 2 PSI below the recommended value (equivalent to approximately 0.2 in the metric system, relative to the standard pressure of 2.4), fuel consumption increases by 1%. Regular maintenance or vehicle inspection: Timely oil changes can reduce carbon buildup (carbon deposits can cause ignition issues, sluggish acceleration, increased fuel consumption, and in severe cases, even cylinder misfires). Regularly check and replace the air filter if dirty, and clean or replace the fuel injectors, spark plugs, and throttle body as per the recommended mileage. Close the windows while driving. Driving with windows open increases wind resistance, which in turn increases the resistance the car faces, requiring more power and thus increasing fuel consumption.
18
0
Share

What are the disadvantages of a soft-top convertible?

The disadvantages of a soft-top convertible are: 1. In the event of a traffic accident, because the roof has no support, it will directly cause harm to the human body. 2. If something falls from a roof or bridge while driving, it poses a great threat to the human body. 3. The roof is prone to getting dirty, and cleaning is troublesome. It may leak during heavy rain, and in cases of heavy rain or snow, the car needs to be covered with a car cover when parked outside. Additional information: The advantages of a soft-top convertible are: 1. Soft tops are usually made of fabric material, which significantly reduces weight compared to metal roofs. Additionally, the rear window of a soft top is typically made of plastic, which is much lighter than the glass of a hard top. 2. Compared to hard tops, soft tops can be folded more compactly, thereby reducing the space they occupy.
5
0
Share

What does 'preset' mean in a car?

preset generally appears on car CDs, meaning pre-set, also known as preset. preset generally appears on car CDs, meaning pre-set, also known as preset. Almost every car is equipped with a CD, even though many cars now have center console screens ranging from 8 to 10 inches, but they are also equipped with multi-disc CDs. The car's multimedia entertainment system is constantly evolving, with increasing technological content. Extended content: 1. 'mode' in a car refers to the mode used to switch multimedia modes, namely the switching between AM, FM, HE, and USB modes. Generally, cars have working modes, such as sports mode, snow mode, off-road mode, etc. 2. It also refers to the remote control buttons on the steering wheel. MODE is the switching between CD (or DVD), radio, and navigation map functions. For example, if the current mode is radio and you want to switch to DVD, pressing the MODE key will switch it.
2
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.