How to turn off the rear light of the Volkswagen Tayron?

1 Answers
DaisyAnn
07/30/25 3:21am
Method to turn off the rear light of the Volkswagen Tayron: There is a switch on both sides of the rear light. Press the switch to turn off the rear light. The rear interior light of the car can also be turned off from the front row. There is a control button on the top of the center console, which can control both the front and rear lights of the car. The rear light of the Volkswagen Tayron is installed either on the top of the driver's compartment or on the top of the rear seats. The reading light plays a significant role. When the interior light is insufficient, the reading light can provide illumination for passengers inside the car. The brightness of the reading light is not set too strong, and it does not affect the driver's normal operation of the vehicle. The Tayron is a car under FAW-Volkswagen, with three body size specifications: length of 4589mm, 4595mm, and 4590mm, width of 1860mm, height of 1660mm, and wheelbase of 2731mm.
Was this review help?
10
3
Share
More Forum Discussions

How to Turn Off the Airbag Warning Light?

Airbags are generally located in three positions inside the vehicle: the front, sides, rear, and roof. The driver's front airbag is installed in the center of the steering wheel; passenger airbags are located in the front passenger seat and rear seats; side airbags are usually placed on the outer side of the seats or mounted on the upper frame of the side doors, with some models installing them on the A-pillars; knee airbags are positioned below the dashboard. If the vehicle has undergone disassembly and the disassembly involved airbag wiring, disconnecting the wiring and then turning on the car's power will cause the vehicle's computer to recognize the wiring as disconnected, triggering the airbag warning light and storing the fault code in the computer. In such cases, the solution is relatively simple. After restoring the wiring, use a diagnostic scanner to clear the fault code. Airbag-related components may develop faults over prolonged use or due to internal program errors, leading to the illumination of the airbag warning light. In these situations, the faulty components must be replaced to turn off the airbag warning light. Airbag repairs involve considerable professional knowledge, and car owners may not be able to resolve the issue themselves. However, we can attempt to determine whether the airbag warning light is due to an actual fault or a false alarm. For example, disconnecting the battery's negative terminal, waiting 5-10 minutes, and then reconnecting it to check if the warning light remains illuminated. If the light does not come back on, it was a false alarm. Sometimes, low battery voltage can also trigger the airbag warning light. Since car owners cannot easily determine the exact cause of the airbag warning light, it is advisable to visit a 4S shop or professional repair facility as soon as possible for inspection. Continuing to drive with the airbag warning light on may result in the airbags failing to deploy properly in the event of a collision.
12
0
Share

What are the reasons why BAIC New Energy suddenly cannot start?

Introduction to the reasons why BAIC New Energy suddenly cannot start: 1. Check whether the car battery has power. In fact, failure to ignite and start is not necessarily due to a dead battery, but a dead battery will definitely prevent ignition and starting. 2. The small battery is depleted; 3. The fuse of the starting motor is broken; 4. The steering wheel is locked in place. Correct maintenance methods for new energy vehicles: 1. Correctly grasp the charging time: Whether it is a new car or a new energy vehicle that has been used for a period of time, it is essential to master the charging time, especially after picking up a new car, it is necessary to replenish the power appropriately. During use, it is also important to correctly control the charging time. If the battery indicator shows red and yellow lights during normal driving, it is time to charge to prevent over-discharge. The charging time should not be too long, as overcharging will cause the battery to heat up and shorten its service life. 2. Protect the charger: The charger of a new energy vehicle is also an important part that cannot be overlooked during daily maintenance. When charging a new energy vehicle, it is necessary to carefully read the charger's user manual. During the charging process, ensure the charger is well-ventilated; otherwise, it will not only affect the charger's lifespan but also easily damage the battery. 3. Maintain sufficient power: After daily use of a new energy vehicle, it is necessary to charge it appropriately. If the daily driving distance does not exceed 20 kilometers, it is best to replenish the power every two days. If the daily driving distance exceeds 50 kilometers, it should be charged on the same day to keep the car battery fully charged. 4. Cleaning of electric vehicles: Electric vehicles also need appropriate cleaning. During cleaning, care must be taken to prevent water from entering the charging socket inside the car, and waterproof measures should be implemented.
1
4
Share

Is it safe to refuel right after oil unloading at a gas station?

It is not advisable to refuel immediately after oil unloading at a gas station. When oil is just unloaded, water and impurities (including water, rust, etc.) at the bottom of the gas station's oil tank can be stirred up. If these are pumped into the car's fuel tank, they can cause hazardous incidents. Refueling at night is better than during the day. Besides avoiding the intense midday sun, refueling at night allows for more mass of gasoline for the same volume, as gasoline is billed by volume rather than weight, and it expands with heat and contracts with cold. Precautions for fuel tank usage are as follows: 1. Do not wait for the yellow light to come on before refueling: Before driving, check the fuel gauge and calculate whether refueling is needed based on the trip distance and the gauge reading. It's better to refuel in advance rather than waiting for the fuel light to come on. The fuel pump is located inside the tank and operates at high temperatures when continuously working. Being submerged in fuel helps to cool it effectively. When the fuel light comes on, it indicates the fuel level is below the pump. Frequently waiting until the light comes on to refuel can shorten the pump's lifespan, and having too little fuel in the tank may even burn out the pump. 2. Choose to refuel in the morning or evening: Generally, temperatures are lower in the morning and evening, and since gasoline has a low vaporization point, it's better to refuel during these times. Gasoline expands with heat and contracts with cold, and it is charged by volume. At lower temperatures, gasoline has a relatively higher density, meaning more mass per unit volume, resulting in more gasoline for the same volume. 3. Avoid filling the tank completely when driving in the city: For regular city driving, there's no need to fill the tank completely. A full tank increases the engine's load, leading to higher fuel consumption. Since refueling is convenient in the city, there's no necessity to fill the tank to the brim.
11
4
Share

What brand of car is Hyundai?

Hyundai is a Hyundai brand. The main models under Hyundai include the Sonata, Elantra, Santa Fe, and Tucson. The logo of Hyundai cars is a slanted letter H inside an ellipse. The ellipse represents the Earth, and the slanted letter H is the first letter of the English word HYUNDAI, the name of the Hyundai Motor Company. It also symbolizes the artistic representation of two people shaking hands. The ellipse represents both a car steering wheel and the Earth, symbolizing Hyundai's global presence.
10
4
Share

What Causes Car Shaking and Engine Warning Light to Illuminate?

Reasons for car shaking and engine warning light illumination: 1. Fuel quality issues - poor or substandard fuel quality; 2. Carbon buildup in the engine or spark plugs. After prolonged use, engines accumulate carbon deposits which can cause engine damage, starting difficulties, poor acceleration, and excessive engine noise. When the engine warning light comes on, you must safely pull over, turn on hazard lights, place a warning triangle 100-150 meters behind the vehicle, and contact a repair shop or 4S dealership for professional assistance with the vehicle issue.
15
2
Share

What's the matter with the brake light malfunction?

Brake light malfunction can be caused by: 1. Severe wear of the brake pads. Brake pads come in two types: those with sensor wires and those without. Those with sensor wires will automatically activate the circuit and illuminate the malfunction light when the brake pads wear down to the limit position. 2. Low brake fluid level. 3. Oil leakage in the brake system or false alarms. The brake light is installed at the rear of the vehicle, with its main color being red to enhance the light's penetration, making it easier for vehicles behind to notice when the front vehicle brakes, even in low visibility conditions, thereby helping to prevent rear-end collisions.
20
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.