How to Turn Off the Rear Interior Light in a Golf?

2 Answers
MacPeter
07/25/25 9:20pm
Adjust the switch of the rear interior light to OFF. If it does not turn off, it indicates a malfunction, and you need to take it to a 4S shop for repair. Below is relevant information about the rear interior light in a Golf: 1. Switch location: Directly above the middle of the rear seats. 2. Switch modes: There are three modes—ON (constant on), DOOR (lights on when the door is open), and OFF (off). In ON mode, the light remains on continuously, even when the car is locked. DOOR mode means the light only turns on when the door is opened, which is convenient for daily use. OFF mode keeps the light off at all times.
Was this review help?
11
1
Share
MichaelDella
08/11/25 10:15pm
I've been driving a Golf for several years, and the rear interior light staying on is a common issue. It's usually caused by the door sensor not detecting that the door is closed or the switch being stuck. After getting in the car, try firmly closing all doors, especially the rear ones. If the light remains on, check the switch button on the light itself and press it to turn it off directly. If that doesn't work, open the fuse box under the glove compartment, refer to the manual for the rear interior light fuse number, and try pulling it out and reinserting it. If the light still stays on, it might be due to loose wiring or a faulty relay. DIY repairs can easily go wrong in such cases, so I recommend going to a professional repair shop immediately for inspection—otherwise, you risk draining the battery, which would be troublesome. Regularly keeping the interior clean and ensuring small objects don't get stuck near the door edges can prevent many such issues.
Was this review help?
4
5
Share
Expand All
More Forum Discussions

What is the Solution for a Car Stalling in Water?

The solution for a car stalling in water is: 1. Tow the car to a water-free area; 2. Take the car to a maintenance department for further handling. Reasons for a car stalling in water: 1. Moisture or water ingress causing a short circuit in the high-voltage distribution system; 2. Water entering the exhaust pipe; 3. Water entering the air intake, specifically at the air filter; 4. Water entering the engine, causing damage and inability to function properly, leading to stalling. Precautions for driving in rainy weather or through waterlogged areas: 1. Be extra cautious when the water depth exceeds the front bumper; 2. Do not continue driving if the water depth exceeds the engine hood; 3. Avoid driving at high speed through ditches or puddles; 4. Maintain a sufficient safe distance.
1
4
Share

What shade of white is the Verna white?

Verna white belongs to the Polar White shade, and its color options also include China Red, Charming Beige, Amber Gold, Champagne Brown, and Moonlight Blue. Taking the 2020 Verna as an example, it is classified as a compact car with body dimensions of: length 4300mm, width 1705mm, height 1460mm, a wheelbase of 2570mm, a fuel tank capacity of 43 liters, and a curb weight of 990kg. The 2020 Verna features a MacPherson strut independent front suspension and a torsion beam non-independent rear suspension. It is equipped with a 1.4L naturally aspirated engine, delivering a maximum horsepower of 95PS, a maximum power of 70kW, and a maximum torque of 132.4Nm, paired with a 5-speed manual transmission.
4
2
Share

What is the ground clearance of the Leiling?

Toyota Leiling's minimum ground clearance is 105mm. The minimum ground clearance refers to the distance between the lowest point of the vehicle (excluding the wheels) and the supporting surface when the vehicle is fully loaded and stationary. It is used to characterize the vehicle's ability to pass over obstacles such as stones and stumps without collision. Below is an introduction to the Toyota Leiling: 1. The entire series comes standard with LED headlights. The body dimensions are 4640mm in length, 1780mm in width, and 1455mm in height, with a wheelbase of 2700mm. 2. The Leiling series is equipped with 8 airbags and multiple electronic-assisted active safety systems as standard, including ABS anti-lock braking system, VSC vehicle stability control system, HAC hill-start assist system, TRC traction control system, and a refrigerant PM2.5 purification device.
20
5
Share

Are Tire Repair Patches Safe?

Tire repair patches are relatively safe. Here are the relevant details: 1. Patch repair is currently a common tire repair method: It offers relatively high cost-effectiveness and simple operation. The effect is not as good as that of a mushroom plug, because the mushroom plug method is the most durable, but it is more expensive. Whether to use a mushroom plug or a patch depends on the extent of the puncture damage. If the tire puncture is large, a mushroom plug is better; if the tire puncture is small and shallow, a patch is more suitable. 2. The reason for choosing based on the damage condition: The working principles of mushroom plug repair and patch repair are different. A mushroom plug uses a rubber patch shaped like a mushroom. The repair involves locating the puncture from inside the tire, threading the mushroom stem through the hole, cutting off the exposed part outside, and then securing the inner part with special adhesive. The mushroom stem provides an external repair effect, while the mushroom cap acts as an internal repair.
20
1
Share

Is it no longer possible to schedule a vehicle annual inspection through Traffic Management 12123?

Traffic Management 12123 cannot schedule a vehicle annual inspection. Below is relevant information about vehicle annual inspections: 1. Introduction: Vehicle annual inspections can promptly eliminate potential safety hazards, encourage enhanced vehicle maintenance, and reduce the occurrence of traffic accidents. 2. Regulations: National regulations stipulate that motor vehicles must periodically pass inspections including exhaust emissions, vehicle appearance, lights, brakes, chassis, etc., and obtain an inspection compliance mark provided there are no traffic violation records. All annual inspection dates are based on the registration date listed on the vehicle license. Motor vehicles must undergo safety technical inspections according to the following periods from the date of registration, commonly referred to as 'annual inspection' or 'annual review'.
17
5
Share

What are the reasons for a car having power but not starting?

The reasons for a car having power but not starting are as follows: 1. Wrong gear position. When parking and turning off the engine, the gear was not shifted to P but directly left in D. Neither D nor R gear positions can start the engine. 2. Out of fuel. Apart from a dead battery, lack of fuel will also prevent the engine from starting. 3. Fuel pump failure. If the starter operates normally when attempting to start, check the fuel lines to see if the fuel pump is the issue. 4. Starter malfunction. A faulty starter can also prevent the engine from starting. 5. Excessive carbon buildup in the throttle. In this case, slightly pressing the accelerator may help start the engine. 6. Faulty crankshaft position sensor. When starting, the engine's computer cannot receive the signal and thus cannot control the spark plugs to ignite.
13
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.