How to Turn Off the Radio in the Mazda3 Axela?

What does 5w20 engine oil mean?

Engine oil labeled as 5w20 represents its viscosity grade. The number 5 indicates the minimum winter operating temperature of -30°C, meaning the smaller the number before the W, the lower the oil's low-temperature viscosity, the better its low-temperature fluidity, and the lower the applicable minimum temperature. The number 20 represents the summer flow viscosity, where the number after the W indicates the oil's viscosity at 100°C—the higher the number, the greater the viscosity. Below is relevant information: 1. Engine oil grade: Oil grades are denoted by a combination of two letters. The "S" series represents oils for gasoline engines, with specifications generally ranging from SA to SN (in alphabetical order, excluding SI). Each subsequent letter indicates improved oil performance over the previous one, with more additives included to protect the engine. 2. Considerations: Vehicle owners can choose engine oil based on local maximum and minimum temperatures, the vehicle's grade, and its condition. Using oil with excessively high viscosity can increase movement resistance and affect engine power. Conversely, using oil with too low viscosity may compromise lubrication quality and accelerate engine wear.

3

Share

Should You Turn Off the Engine When Waiting in the Car?

When waiting in the car, fuel consumption also increases, so for economic considerations, it is better to turn off the engine while waiting. Here are some relevant points: 1. Disadvantages of not turning off the engine: In fact, waiting with the engine running can cause damage to the car. When the engine is turned off, it stops running, and the car suffers no loss. However, if the engine continues to idle, it may lead to carbon buildup. Over time, this can result in black smoke emissions and may even produce carbon monoxide. If this gas enters the car, it could cause carbon monoxide poisoning, endangering the safety of passengers inside. Without turning off the engine, it keeps running continuously. 2. Precautions: There are a few other points to note. When waiting in the car, always remember to lock the central locking system. Some drivers may forget to lock the doors after passengers exit the vehicle. In such cases, the doors can be opened from the outside at any time, even if you are inside the car. This could lead to someone unintentionally opening the rear door and stealing valuables from the car. Therefore, even when waiting, it's important to lock the central locking system and keep valuable items close to you to avoid unnecessary financial losses.

9

5

Share

How Often Should a Van Have Its Oil Changed?

Generally, the oil should be changed once the recommended mileage is reached. For some high-end vehicles, an oil change reminder will appear when the mileage is due. Typically, the break-in period for a new car is 2,500 to 3,000 kilometers, while the standard interval is 5,000 kilometers, depending on driving habits and oil grade. The importance of oil changes. Engine oil is as vital to an engine as blood is to the heart. Engine oil contains various additives that effectively protect the engine's critical moving parts, ensuring smooth operation. Oil change intervals. When purchasing a car, the manufacturer provides a maintenance manual that specifies the recommended oil change mileage and intervals, which for most vehicles range between 5,000 to 10,000 kilometers. The oil change interval for a car is typically between 5,000 to 10,000 kilometers or every six months to a year. Introduction to engine oil: 1. Engine oil, also known as motor lubricant, serves to lubricate the engine, reduce friction, assist in cooling, and prevent rust and corrosion, often metaphorically referred to as the 'blood' of a car; 2. Engine oil generally consists of two components: base oil and additives. The base oil is the primary constituent, determining the fundamental properties of the lubricant, while additives enhance and compensate for any performance shortcomings of the base oil.

18

4

Share

Is Higher Octane Gasoline Always Better?

Higher octane gasoline is not always better. The appropriate octane rating should be selected based on the engine's compression ratio. Here is relevant information about gasoline octane ratings: 1. Regulations: In December 2011, Beijing proposed changing gasoline grades from "90#, 93#, 97#" to "89#, 92#, 95#", while stipulating sulfur content must not exceed 0.001%. 2. Differences in octane ratings: Higher-grade fuel burns slower with lower combustion knock, requiring engines with higher compression ratios. Conversely, lower-grade fuel burns faster with greater combustion knock, suitable for engines with lower compression ratios.

6

0

Share

What are the annual inspection exhaust emission standards?

Annual inspection exhaust standards: Carbon monoxide: A (700mg/km); B (500mg/km); Non-methane hydrocarbons: A (68mg/km); B (35mg/km); Nitrogen oxides: A (60mg/km); B (35mg/km); PM fine particles: A (4.5mg/km); B (3mg/km). General process of vehicle exhaust testing: 1. Information entry: Computer enters information, registers vehicle details, then assigns inspection lanes based on vehicle characteristics. This process is fully automated by the computer. 2. Designated inspection lane: Dispatchers direct staff to drive vehicles to assigned lanes. Supervisors have no authority to change inspection lanes. 3. Lane confirmation: Control room verifies if vehicles enter correct lanes. Next steps cannot proceed without confirmation. 4. Exhaust testing: Technicians follow computer prompts for proper operation. Successful testing requires correct procedures. Results are compared against standard values, then uploaded to servers. 5. Payment: Finally pay at environmental testing fee counter. Non-compliant vehicles require rectification before retesting. Compliant vehicles receive environmental certification marks.

16

5

Share

What are the two types of caliper disc brakes?

Caliper disc brakes can be divided into two types: fixed caliper disc brakes and floating caliper disc brakes. Here is an introduction to the advantages of disc brakes: 1. Better heat dissipation: Compared to drum brakes, disc brakes are less likely to experience brake fade and failure when braking continuously. 2. Minimal thermal expansion: The thermal expansion of the brake disc in the thickness direction is extremely small, and the change in size after heating does not increase the travel of the brake pedal. 3. Rapid system response: The disc brake system responds quickly, allowing for high-frequency braking actions, making it more suitable for the requirements of ABS systems.

17

0

Share

How to Turn Off the Radio in the Mazda3 Axela?

What does 5w20 engine oil mean?

Should You Turn Off the Engine When Waiting in the Car?

How Often Should a Van Have Its Oil Changed?

Is Higher Octane Gasoline Always Better?

What are the annual inspection exhaust emission standards?

What are the two types of caliper disc brakes?

What methods can be used to repair a dented car roof?

How to Calculate Taxes and Fees for a New Car in 2021?

Do new cars still need a break-in period?

How many kilometers can a car travel in one hour?