How to Turn Off the Radio in Roewe RX5?

How to Check if the ETC in the Car is Functioning Properly?

To check if the ETC in the car is functioning properly: manually insert and remove the card; if there is a sound, it proves that the ETC is in normal working condition. The method to install ETC in a car is: 1. Peel off the double-sided adhesive plastic film on the back of the ETC device and stick it to the position behind the rearview mirror on the upper part of the windshield; 2. After sticking, press firmly for about 10 seconds. ETC is an automatic toll collection system for highways or bridges. It uses dedicated short-range communication between the vehicle-mounted electronic tag installed on the windshield and the microwave antenna in the ETC lane at the toll station, combined with computer networking technology for backend settlement processing with the bank, achieving the purpose of vehicles passing through highway or bridge toll stations without stopping to pay tolls.

20

1

Share

How long does it take to drive 10km on the highway?

It takes about 10 minutes to drive 10km on the highway. The actual time required to drive 10 kilometers depends on factors such as vehicle speed, vehicle type, and traffic conditions. Since highways generally allow for faster speeds, it typically takes around 10 minutes. Factors affecting driving speed: Road conditions: The technical performance of road surfaces significantly impacts various vehicle components. Good road conditions create favorable driving conditions, while poor road conditions deteriorate vehicle performance. Operating conditions: Operating conditions are another factor influencing vehicle component usage. For example, vehicles carrying identical loads experience 50%-52% lower speeds in urban areas compared to suburban roads, with engine RPM increasing by 30%-36% and more frequent gear shifting required. When driving on highways, higher speeds and stricter safety regulations apply compared to regular roads. Beyond proper vehicle operation, heightened safety awareness is crucial because highway speeds start at 60km/h, with each 10km/h speed increase reducing safety margins. Maintaining safe following distances is particularly important.

1

Share

What is the comprehensive fuel consumption of the X-Trail?

The comprehensive fuel consumption of the X-Trail is 5.8-6.4L/100km. There are currently 8 models of the X-Trail on sale. The Comfort, Luxury, and Fashion editions have a comprehensive fuel consumption of 5.8L/100km. The 7-seater Luxury edition has a comprehensive fuel consumption of 6.1L/100km. The Premium, Supreme, and Luxury editions have a comprehensive fuel consumption of 6.3L/100km. The 7-seater Premium edition has a comprehensive fuel consumption of 6.4L/100km. The above figures are NEDC comprehensive fuel consumption, which is the fuel consumption data measured under the NEDC test procedure. The actual fuel consumption is higher than these values, ranging from 7.0-9.5L/100km. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not easing off the throttle before a red light, can increase fuel consumption. The car itself: Cars with larger displacement generally consume more fuel than those with smaller displacement because larger displacement usually means higher power, requiring more gasoline to burn and perform work. Cars with greater weight also consume more fuel because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases car resistance and fuel consumption. Low environmental temperature: When the engine block temperature is low during a cold start, the injected gasoline is less likely to atomize, requiring more gasoline to be injected for combustion, thus increasing fuel consumption. Additionally, at low temperatures, the engine computer controls the car to warm up at higher RPMs, which also increases fuel consumption.

2

5

Share

Can I Buy a Car That Has Been in the Showroom for a Month?

Cars displayed in showrooms can certainly be purchased, often at a slightly discounted price, and the new car smell has mostly dissipated. Methods to distinguish between showroom cars and brand-new cars: 1. Check the production date: First, look at the car's production date. If it was manufactured a long time ago, it might be an inventory car. 2. Inspect the engine bay: Open the engine bay and check its cleanliness. A brand-new car that hasn't been driven much should have a tidy and pristine engine bay, with a smooth engine surface free of marks and clean wiring without dust accumulation. 3. Examine the exhaust pipe: Insert a finger into the exhaust pipe to see if it has turned black. 4. Check the tires: New tires usually have computer lines similar to paint and sidewall hair, which wears off after 50~100 kilometers. If the tire hair is completely worn off, it indicates abnormal mileage. 5. Look at the pedals: Compared to test-drive or display cars, brand-new cars have less mileage, so the accelerator, brake, or clutch pedals should appear very new. 6. Inspect the brake discs: Brake systems are inevitably used when driving, so higher mileage results in more noticeable wear on the brake discs, which will feel exceptionally smooth to the touch. 7. Check the undercarriage: Few people thoroughly inspect the undercarriage when picking up a car, but a brand-new car's undercarriage should be very clean. 8. Examine the dipstick: Start the cold engine, turn it off after 3 minutes, pull out the dipstick, and wipe it with a tissue to see if it turns black.

16

2

Share

What Does the Driving License Subject 1 Test Cover?

The "Regulations on the Application and Use of Motor Vehicle Driving Licenses" clearly stipulates the content of the Subject 1 test: road traffic safety laws, regulations, and rules; traffic signals and their meanings; knowledge of safe driving and civilized driving; safe driving knowledge under conditions such as highways, mountainous roads, bridges, tunnels, nighttime, adverse weather, and complex road conditions; emergency handling knowledge for situations like tire blowouts, steering failure, and brake failure; general structure of motor vehicles, common knowledge of main safety devices, basic knowledge of daily inspections and maintenance; basic knowledge of self-rescue and first aid after traffic accidents, as well as common hazardous materials. According to the "Regulations on the Application and Use of Motor Vehicle Driving Licenses," the Subject 1 test consists of 100 questions, divided into single-choice questions and true/false questions, with each question worth 1 point, totaling 100 points. If 11 questions are answered incorrectly during the test, the system will automatically submit the paper and end the test. Subject 1, also known as the Subject 1 theory test or driver theory test, is part of the motor vehicle driving license assessment. The test content includes driving theory basics, road safety laws and regulations, local regulations, and related knowledge. The test is conducted on a computer, with a time limit of 45 minutes. Subject 1 test precautions: Candidates should pay attention to their attire, no slippers are allowed, electronic devices and bags are not permitted in the examination room, bring their ID card, and queue to enter the waiting hall. Observe the precautions and procedures on the large screen, and store personal belongings in a locker before entering the examination room. In the examination room, the identity verification area will assign a seat. After finding the seat, start the test, ensure the camera is aligned with you, and adhere to exam discipline. If you fail the first time, there is a retake opportunity on the same day. If you fail again, you will need to pay and reschedule. After the test, queue to collect the score report and sign it. Failure to sign will render the result invalid. There is no limit to the number of times you can reschedule the Subject 1 test. Each subject can be taken once, and if you fail, you can retake it once. If you do not attend the retake or fail the retake, the test will be terminated, and the applicant must reschedule the test. In contrast, Subject 2 and Subject 3 have only five test attempts each. Subject 2 and Subject 3 tests can be rescheduled after ten days. If you fail the Subject 3 safe and civilized driving knowledge test, the passed road driving skills test results remain valid. There are three subjects in the driving test: Subject 1, Subject 2, and Subject 3. Subject 1 refers to the road traffic safety laws, regulations, and related knowledge test; Subject 2 refers to the field driving skills test; Subject 3 is divided into two parts: road driving skills and safe and civilized driving knowledge test. The safe and civilized driving knowledge test is conducted after Subject 3, so it is commonly referred to as Subject 4. However, in official terms (i.e., the Ministry of Public Security Order No. 123), there is no such term as Subject 4.

16

4

Share

Can ETC continue to be used when changing cars but not license plates?

ETC cannot be used if the vehicle information it is bound to is inconsistent. Different vehicle models have different highway toll fees. According to the "Rules for the Use of Non-Stop Fast Pass Systems," when applying for ETC, the ETC card and OBU device are already bound to the vehicle, and the relevant vehicle information has been imported, forming a one-to-one correspondence. If you switch to a new car with a new license plate, you need to cancel the original ETC and reapply for the new car. If it's a new car with the old license plate, you can simply update the vehicle information at an offline service center. ETC is a non-stop electronic toll collection system. ETC lanes are set up for vehicles equipped with ETC onboard devices and use electronic tolling. The electronic toll collection system is an automatic toll system for highways or bridges. ETC's fee deduction principle: There will be one or more ETC lanes on the highway. Through microwave dedicated short-range communication between the onboard electronic tag installed on the vehicle's windshield and the microwave antenna in the ETC lane at the toll station, computer networking technology is used to conduct background settlement with the bank, achieving the goal of vehicles not needing to stop at toll stations to pay tolls. All of this is based on the principle of passing first and deducting fees later. Benefits of installing ETC: Time-saving: Eliminates the hassle of waiting in line; Green and eco-friendly: Low-carbon, as vehicles pass through toll stations without stopping, reducing noise and exhaust emissions and minimizing pollution; Reduced wear and tear: Saves costs by reducing the frequency of vehicle starts and brakes, lowering wear and fuel consumption; Improved efficiency: The theoretical efficiency of ETC lanes can be increased by 2-3 times or more, making traditional ETC updates faster and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous. More policy support: The State Council explicitly stated in the "13th Five-Year Plan for the Development of a Modern Comprehensive Transportation System" that "by 2020, intercity transportation smart cards will be basically realized in key city clusters, and the proportion of vehicles equipped with ETC will significantly increase." It also clearly set the goal in the "13th Five-Year" comprehensive transportation development indicators that "by 2020, the ETC usage rate for road passenger vehicles will reach 50%." More future possibilities: In addition to continuously improving the convenience of ETC installation and usage and the ETC usage rate for passenger vehicles, the future will also promote the use of ETC for trucks and explore the deep integration of the ETC system with vehicle-to-vehicle communication, vehicle-to-infrastructure coordination, and other smart transportation development directions, providing comprehensive travel services for car owners. This means more application scenarios will support ETC applications. ETC usage precautions: The ETC transaction sensing range is 8 meters. When encountering a vehicle in front that has stopped, to prevent the ETC device of the front vehicle from malfunctioning or not having an ETC device at all, maintain a distance of more than 10 meters from the front vehicle to avoid automatic sensing and paying the toll for the front vehicle. The recognition speed for ETC lane passage is 20 km/h. If the speed is too fast, the vehicle device information cannot be read, which will also result in a failed fee deduction. Unauthorized removal or movement of the OBU device, or detachment or loosening of the ETC electronic tag, will cause the electronic tag to fail. It can be sent to the bank where the ETC card was issued or the highway service center for testing. If the loosening or detachment is not due to human factors, it only needs to be reactivated. When using a debit card bound to ETC, insufficient balance will also result in a failed fee deduction. Follow the guidance of on-site staff to use the manual MTC lane and pass by paying cash or swiping a card. Excessive thickness of the car windshield can cause poor sensing. This is especially important for vehicles that have had their windshields replaced after accidents or for those who have modified their front windshields.

1

Share

How to Turn Off the Radio in Roewe RX5?

How to Check if the ETC in the Car is Functioning Properly?

How long does it take to drive 10km on the highway?

What is the comprehensive fuel consumption of the X-Trail?

Can I Buy a Car That Has Been in the Showroom for a Month?

What Does the Driving License Subject 1 Test Cover?

Can ETC continue to be used when changing cars but not license plates?

What is the 0-100 km/h acceleration time of the Qiantu K50?

What does the range on the car dashboard mean?

What are the consequences of removing the catalytic converter?

How to Set the Time on an Eighth-Generation Accord?