How to turn off the radio in Jetta VS5?

What is 260 kPa in tire pressure?

260 kilopascals equals 2.6 bar tire pressure. According to the provisions and requirements of the international GBT2978-2008 standard, the recommended tire pressures for different types of tires are as follows: Standard tires: 2.4-2.5 bar; Reinforced tires: 2.8-2.9 bar; Maximum pressure: Should not exceed 3.5 bar. Hazards of overinflated tires: Reduced friction and adhesion of tires, affecting braking performance; Causes steering wheel vibration and deviation, reducing driving comfort; Accelerates localized wear of tread patterns in the center of the tire, shortening tire lifespan; Increases vehicle vibration, indirectly affecting the lifespan of other components; Causes excessive extension deformation of tire cords, reducing tire elasticity and increasing the load on the vehicle during driving; Decreases puncture resistance. When encountering sharp objects like nails or glass on the road, they can easily penetrate the tire, causing internal cracks and blowouts that may lead to tire bursts.

10

3

Share

How to reset the tire pressure light on Golf 7?

Before resetting the tire pressure light on Golf 7, first confirm whether the tire pressure is normal. If the tire pressure is normal, you can turn on the ignition switch, then press and hold the SET button in front of the gear lever for 3-5 seconds, and the tire pressure light will be reset. Alternatively, you can also set it in the car computer by selecting the CAR button, clicking on settings, entering the tire options, and then selecting the tire pressure light reset. Here are some additional details: 1. Golf calibration wheel: The tire pressure reset button for Golf is located on the tire pressure monitoring indicator button at the lower part of the central auxiliary instrument panel. There are two types of calibration tire monitoring indicators: A and B. 2. Tire monitoring indicator (Type A): After changing the tire pressure or replacing one or more wheels, the tire monitoring indicator must be recalibrated. It must also be recalibrated after wheel rotation. 3. Golf calibration tire monitoring indicator (Type B): After changing the tire pressure or replacing one or more wheels, the tire monitoring indicator must be recalibrated. It must also be recalibrated after wheel rotation.

18

1

Share

What kind of engine oil should be used for Haval H6 1.5T?

Haval H6 1.5T uses original factory engine oil, SL grade 10W-40 from French Total, or engine oil with CI-4 grade and 15W-40 viscosity can also be used. The Haval H6 1.5T is equipped with a turbocharged engine, so it is recommended to choose fully synthetic engine oil based on the vehicle's condition. The better the quality of the engine oil, the better the protection effect on the engine. Below is the relevant introduction about engine oil: 1. Engine oil can lubricate and reduce wear, assist in cooling, seal and prevent leaks, prevent rust and corrosion, and provide shock absorption for the engine. 2. Since engine oil has a significant impact on the performance and lifespan of the engine, it should be strictly selected according to the same series, usage grade, and viscosity grade as specified in the vehicle's user manual. 3. The engine oil recommended in the vehicle manual is based on the engine's performance and the temperature conditions of the sales region, providing certain guidance for the selection of engine oil and leaving a large safety margin. It is also one of the prerequisites for warranty claims during the engine's warranty period.

9

5

Share

Can You Continue Driving If the Car Lacks Antifreeze?

If the car is running low on coolant, you should not continue driving, as it may cause the engine to overheat. Antifreeze is a type of coolant containing special additives, primarily used in liquid-cooled engine cooling systems. It offers excellent performance in preventing freezing in winter, boiling in summer, and protecting against scale and corrosion throughout the year. How to Determine If There Is a Lack of Antifreeze: Observe the antifreeze warning light on the dashboard. If it lights up, it is likely due to a lack of antifreeze, though it could also be caused by excessively high cylinder temperatures. Check the antifreeze reservoir. If the fluid level is below the minimum mark (MIN), do not continue driving and add antifreeze promptly. Inspect the water level markings on the antifreeze tank. The normal antifreeze level should be between the maximum and minimum marks. If it is below the minimum mark, it indicates a lack of antifreeze. How to Choose Antifreeze: The key indicators for antifreeze are its freezing and boiling points. Available in the market are antifreeze products with freezing points of -15°C, -25°C, -30°C, and -40°C. Generally, you should choose one with a freezing point at least 10°C lower than the lowest temperature in your region.

1

4

Share

How to reset the maintenance light on MG ZS?

The MG ZS does not have a manual reset button for the maintenance light; it can only be reset by a technician using a diagnostic computer at a 4S shop. The purpose of the maintenance light is to record the mileage of some important components, serving as a reminder for car owners and maintenance personnel. Below is an introduction to the MG ZS: 1. In terms of appearance, the MG ZS has a body length/width/height of 4314/1809/1648mm, with a wheelbase of 2585mm. 2. For the interior, the new MG ZS is equipped with a 10.1-inch high-definition floating touch screen and a windscreen-style full LCD instrument panel. The interior adopts a new red and black color scheme, with large-area soft materials covering the cabin. The automatic transmission version comes standard with an electronic handbrake, and a sporty handle has been added to the passenger side of the center console. 3. In terms of power, the new MG ZS is equipped with a new 260TGI dual-injection turbocharged engine, delivering a maximum power of 160 horsepower, with a power increase of up to 125 horsepower, the highest in its class, and a maximum torque of 230 N·m, providing strong power output.

4

1

Share

How to start the Volkswagen Lavida?

The starting method for the Volkswagen Lavida: Press the one-touch start button twice consecutively. More information about the Volkswagen Lavida is as follows: 1. The Lavida's onboard navigation system combines touch screen and rotary knob controls, and features MP3 playback capability, supporting USB, AUX, and SD card expansion slots. It is user-friendly and powerful, with a foldable LCD screen design. 2. The Lavida injects a sense of luxury and grandeur into the A-segment car market with its forward-looking design language, rewriting consumers' traditional impressions of the A-segment car market and thereby meeting more localized consumer demands.

10

5

Share

How to turn off the radio in Jetta VS5?

What is 260 kPa in tire pressure?

How to reset the tire pressure light on Golf 7?

What kind of engine oil should be used for Haval H6 1.5T?

Can You Continue Driving If the Car Lacks Antifreeze?

How to reset the maintenance light on MG ZS?

How to start the Volkswagen Lavida?

How to Fold Down the Rear Seats of a Corolla Hybrid?

How to Adjust the Time on a Classic Focus?

How to Repair a Broken Corolla Steering Gear?

What are the differences between Emgrand and Vision?