How to Turn Off the Radio in GS4?

How to Release the Steering Wheel Lock with One-Key Start?

Under normal circumstances, when the engine one-key start button is in the ACC state, the steering wheel will automatically unlock. If the steering wheel fails to unlock properly, the following method can be adopted: turn the steering wheel left and right while pressing the engine one-key start button to release tension and unlock the steering wheel. Below are the relevant details: Function of the one-key start steering wheel lock: The steering wheel lock is a simple anti-theft feature. When the car is turned off, rotating the steering wheel from the centered position in one direction (usually to the left) by a certain angle will cause a "click" sound, locking the steering wheel. In the locked state, the steering wheel cannot be turned, the key cannot be turned, and the car cannot be started, thereby achieving anti-theft functionality. One-key start device: The one-key start device is part of a smart car, serving as a button mechanism that simplifies the starting process and can also turn off the engine. This device can be installed in place of the original key lock or as an independent panel modification. Conditions for automatic steering wheel lock: When the engine one-key start button is in the OFF state, the steering wheel locks for anti-theft purposes. The steering wheel will also automatically lock when the car door is opened or the smart key is removed from the smart key cylinder.

6

2

Share

What is the speed rating of 95v tires?

Tire marking 95v indicates that the maximum speed a 95v tire can withstand is 240 kilometers per hour. 95v represents the tire's speed rating and load index, where 95 is the load index and v is the speed rating. The load index and speed rating of tires are typically marked on the sidewall, which contains various crucial information and key parameters. Precautions for tire usage: 1. Tire specifications, recommended tire pressure, manufacturing date, and other data are usually marked on the sidewall. The manufacturing date is represented by a four-digit number, such as 1519, indicating the tire was produced in the 15th week of 2019. Tires also have a shelf life; most unused tires have a shelf life of three years, and tires older than three years should not be purchased. Since tires are rubber products, they will age even if stored unused for extended periods. 2. Most tires installed on vehicles can last for four years, so it is recommended to replace tires every four years. After replacing tires, perform a dynamic balance test on each wheel to prevent abnormal vibrations during high-speed driving. During regular vehicle use, frequently check the tire pressure and surface for any damage. 3. Tire pressure is critical; it should not be too high or too low. If the tire pressure is too high, it will reduce the contact area between the tire and the ground. If the tire pressure is too low, the tire may experience wave deformation during high-speed driving, increasing the risk of a blowout.

18

0

Share

How to Deal with the DPF Warning Light?

Currently, there are two scenarios when the DPF light comes on, involving three operational states: automatic regeneration, manual regeneration, and on-demand regeneration. Below are the details: 1. Automatic Regeneration: The DPF indicator displays green, indicating no need for manual intervention. This typically occurs when the vehicle is driven at high speeds (above 80km/h). Continue driving normally until the particulate matter is processed, and the DPF light will turn off automatically. 2. Manual Regeneration: The yellow DPF light flashes, usually when the vehicle is driven at speeds below 80km/h. In this case, promptly move the vehicle away from the road, flammable, and explosive materials. Once parked, shift to neutral, engage the parking brake, and press the DPF control button. The yellow light will stay on continuously, and the process takes about 15-30 minutes. Once completed, the light will turn off automatically. 3. On-Demand Regeneration: This can be performed at any time, suitable for users who primarily drive in urban areas. For example, after returning home, park the vehicle, press and hold the DPF button for 3-5 seconds to initiate a check. If the yellow light flashes, manual regeneration is required. Press the DPF button again, and the yellow light will stay on. Wait for 15-30 minutes until the light turns off, indicating the particulate matter has been processed.

16

3

Share

What Causes the Steering Wheel to Suddenly Become Hard to Turn and Heavy?

The reason why the steering wheel suddenly becomes hard to turn and heavy may be due to a failure in the power steering system. If this occurs, do not continue driving. It is recommended to arrange for a tow truck to transport the vehicle to a repair shop or 4S store for inspection and repair to prevent accidents. Below are the relevant details: 1. Classification of Power Steering: There are three types of power steering systems in cars: electric power steering (EPS), electro-hydraulic power steering (EHPS), and mechanical hydraulic power steering (MHPS). 2. Electro-Hydraulic Power Steering System: Both electro-hydraulic and mechanical hydraulic power steering systems have hydraulic mechanisms, and both utilize a power steering pump. In the electro-hydraulic system, the pump is driven by an electric motor, whereas in the mechanical hydraulic system, the pump is driven by the engine. 3. Electric Power Steering System: The electric power steering system does not have a hydraulic mechanism or a power steering pump. Instead, it relies directly on an electric motor to provide steering assistance. 4. Regular Replacement of Power Steering Fluid: Both electro-hydraulic and mechanical hydraulic power steering systems require the use of power steering fluid. The fluid in these systems needs to be replaced regularly. If left unchanged for a long time, it can cause the steering wheel to become heavy.

1

0

Share

What are the differences between three-cylinder and four-cylinder cars?

The main differences between three-cylinder and four-cylinder cars are as follows: 1. Fuel consumption: Due to its structural advantages, the three-cylinder engine excels in fuel consumption control. Its smaller size and higher power density result in greater thermal efficiency. The three-cylinder engine also has lower pumping losses due to its structure, and the smaller cylinder size reduces friction and heat dissipation losses during operation. 2. Power performance: In the displacement range of 1.0L-1.5L, the three-cylinder engine has larger single-cylinder volume compared to a four-cylinder engine of the same displacement, providing better low-speed torque. Fewer cylinders mean less mechanical friction, and increasing the number of cylinders can reduce single-cylinder efficiency. Three-cylinder engines offer faster power response and stronger performance compared to four-cylinder engines. 3. Size and weight: Three-cylinder engines are smaller and lighter, reducing overall vehicle weight. Their compact size also saves space in the engine compartment, providing room for electrification components. Four-cylinder engines are larger in size.

6

0

Share

What engine is used in the Jianghuai K5?

Jianghuai K5 has two types of engines: one is HFC4DA1-1C, and the other is 4B2-95C43. Here are the relevant details: The two engines of Jianghuai K5 are: (1) HFC4DA1-1C engine: Maximum power is 68/3600, and maximum torque is 220/1800-2200. (2) 4B2-95C43 engine: Maximum power is 70/3200, and maximum torque is 240/2000. Below is additional information: The Jianghuai K5 engine is a 2.8L turbocharged diesel engine. The vehicle dimensions are 5135×1750×1710, and it is a 4-door, 5-seat pickup truck. It complies with the China IV emission standard.

9

5

Share

How to Turn Off the Radio in GS4?

How to Release the Steering Wheel Lock with One-Key Start?

What is the speed rating of 95v tires?

How to Deal with the DPF Warning Light?

What Causes the Steering Wheel to Suddenly Become Hard to Turn and Heavy?

What are the differences between three-cylinder and four-cylinder cars?

What engine is used in the Jianghuai K5?

How to Open the Trunk of the Volkswagen Tiguan L?

What Should Be Noted During the Overtaking Process While Driving?

Why does the slippery road indicator appear on the dashboard?

What is the Rover car brand?