How to Turn Off the Radio in a Hyundai Elantra?

1 Answers
DeMorgan
07/30/25 3:44am
To turn off the radio in a Hyundai Elantra, press the power button located in the center of the function keys on the central console. Below is some relevant information about the Hyundai Elantra: 1. Interior Features: It comes equipped with an auto-dimming rearview mirror, which not only enhances driving safety but also integrates the latest BlueLink human-vehicle interaction system. 2. Powertrain: The Elantra is powered by a 1.6L Gamma engine and a 1.8L Nu engine. The 1.6L engine delivers a maximum power of 127 horsepower and a peak torque of 155 N·m, while the 1.8L variant uses the latest Nu engine, producing a maximum power of 145 horsepower and a peak torque of 175 N·m. It is paired with either a 6-speed manual transmission or a 6-speed automatic transmission.
Was this review help?
3
5
Share
More Forum Discussions

Does the Bora 6-speed automatic manual transmission have no oil dipstick?

Bora 6-speed automatic manual transmission has no oil dipstick. Transmission oil level check: The transmission oil level can only be checked by lifting the vehicle with a lift and inspecting a drain plug underneath the chassis. If no oil comes out when the plug is removed, it indicates low oil level; otherwise, it indicates high oil level. Transmission dipstick check: Park the car on a level surface, engage the handbrake, and let the engine idle for more than a minute. Shift through each gear for a few seconds to allow the torque converter to engage. Automatic transmission oil check without a dipstick: With the engine idling, shift through each gear once, then shift to P. Loosen the transmission plug until oil starts to drip, then tighten it again.
9
0
Share

Is releasing the handbrake down or up?

Handbrake up is to pull the handbrake, down is to release the handbrake. Here are some related introductions about the handbrake: 1. Introduction to the handbrake: The parking brake, commonly known as the handbrake, functions to provide resistance to the car when parked, preventing the car from rolling. The parking brake, also known as the handbrake or the parking gear in automatic transmissions, locks the drive shaft or rear wheels. The force of the parking brake is much less than that of the service brake, just enough to prevent the car from rolling on a slope. 2. Precautions for using the handbrake: Do not pull the handbrake to the highest position, because the pull line in the handbrake system includes not only steel cables but also nylon ropes. If it is pulled to the highest position every time, the nylon rope will quickly suffer from material fatigue.
16
1
Share

Where is the VIN number located on a Beetle?

The VIN number of a Beetle is stamped on the right side of the floor panel under the rear seat, to the left of the spare wheel well at the rear of the vehicle. The VIN, short for Vehicle Identification Number, is a unique code assigned by the manufacturer to identify each vehicle. The VIN is a 17-character alphanumeric code, also known as the 17-digit identification number, chassis number, or 17-digit code. This combination ensures that no two vehicles of the same model will have the same number within 30 years, providing a unique identifier for each car. This sequence of numbers reveals information such as the country of manufacture, manufacturer, year, model, engine type, and other specifications, making it essentially the "car's ID card." The 17-character VIN is divided into three parts: the first part is the WMI—World Manufacturer Identifier (positions 1-3), the second part is the VDS—Vehicle Descriptor Section (positions 4-9), and the third part is the VIS—Vehicle Identifier Section (positions 10-17).
18
1
Share

What are the techniques for steering while reversing and turning by looking at the rearview mirrors?

Here are the specific techniques for steering while reversing and turning by looking at the rearview mirrors: 1. Assess the situation clearly: Before reversing, check the conditions behind the vehicle, estimate the reversing path, and determine whether the front of the car might hit any obstacles during the process. Avoid accelerating while reversing and control the speed to keep it slow. 2. Steering wheel operation: According to the direction the rear of the car needs to move, use your left hand to turn the steering wheel. If the rear needs to move to the right rear, turn the steering wheel to the right; conversely, turn it to the left. This is consistent with the steering operation when driving forward. 3. Observe the left and right rearview mirrors: During reversing, do not constantly look behind. While ensuring safety behind the vehicle, periodically observe the left and right rearview mirrors, pay attention to the distance between obstacles and the car body, and use the steering wheel to adjust the car's position while moving backward accordingly.
17
0
Share

What is the working principle of a CVT transmission?

CVT transmission works by using a transmission belt and a variable-width pulley for power transfer. When the pulley changes its groove width, it alters the contact radius of the driving and driven pulleys with the transmission belt, thereby achieving gear shifting. The transmission belt is typically made of rubber, metal, or metal chains. Additional information: 1. CVT usually refers to a type of automotive transmission, also known as a continuously variable transmission. 2. The difference between a CVT and a stepped transmission is that its gear ratio is not a series of discrete points but a continuous range of values, resulting in improved fuel efficiency, power performance, and driving smoothness, while also reducing emissions and costs. 3. The structure of a CVT is simpler and more compact than traditional transmissions. It does not have the multiple gear pairs of a manual transmission or the complex planetary gear sets of an automatic transmission. It mainly relies on the primary and secondary pulleys and a metal belt to achieve continuously variable gear ratios.
15
1
Share

Which country is the engine of the Exeed LX from?

Exeed LX's engine is made in China. Exeed LX's engine: The Exeed LX is equipped with a 1.6-liter turbocharged engine, paired with a 7-speed dual-clutch transmission. The engine of the Exeed LX has a maximum power of 145kW and a maximum torque of 290Nm. Engine: An engine is a machine that can convert other forms of energy into mechanical energy, including internal combustion engines, external combustion engines, jet engines, electric motors, etc. For example, an internal combustion engine usually converts chemical energy into mechanical energy. The term engine can refer to both the power-generating device and the entire machine including the power device (e.g., gasoline engine, aircraft engine). The engine was first developed in the UK, so the concept of the engine also originates from English, with its original meaning referring to "a mechanical device that generates power."
14
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.