How to Turn Off the Pedestrian Warning Sound on Wuling Hongguang Mini?

How to Switch Modes on Volkswagen's Digital Cockpit?

Open the driver's door of the vehicle. Press the one-touch start button to power on. Press the instrument function button on the right side of the steering wheel. Cycle through the instrument display options and select according to personal preference.

10

2

Share

What are the wheel specifications for the Toyota Mark X?

Toyota Mark X wheel specifications are ET45-8J-5x114.3. Below is a detailed explanation of these specifications: ET45 represents an offset of 45mm: The ET value, also known as the Offset value, refers to the deviation between the mounting surface and the centerline of the wheel rim, measured in millimeters. It can be positive, zero, or negative. When the ET value is 0, the mounting surface is aligned with the wheel's centerline. A larger positive ET value means the mounting surface is more towards the inner side. 8J represents the width and shape of the wheel: The '8' indicates the width of the wheel, and 'J' represents the shape and height of the wheel flange. A wheel of this size can be paired with tires that are 18 inches in diameter and 225/235/245mm in width. 5x114.3 represents the bolt pattern: 5x114.3 indicates that the wheel has 5 bolt holes, with a pitch circle diameter (PCD) of 114.3mm between adjacent holes.

17

4

Share

Reasons for Throttle Pedal Signal 1 and 2 Rationality Fault?

Possible causes of the fault: Based on the fault symptoms, the unresponsiveness to throttle input is caused by the fault code P213564, indicating a rationality fault between throttle pedal signal 1 and throttle pedal signal 2. Troubleshooting process: 1. Data reading: The engine data stream was read to analyze the voltage difference between throttle pedal signal 1 and throttle pedal signal 2. It was found that the throttle pedal signal voltage was normal. 2. Accelerator pedal: The signal voltage of accelerator pedal 1 was 0.8V, and the signal voltage of the accelerator pedal was 0.4V, maintaining a proportional relationship, which is normal. However, the ECU reported a fault code that could not be erased. 3. Throttle input: Attempts were made to synchronize the changes of the two signals through pedal throttle input, maintaining the proportional relationship, but the fault code still could not be erased. The inability to erase the fault code means the vehicle cannot be handed over to the customer, necessitating a thorough investigation of this fault point. 4. Disconnecting the pedal connector: The pedal connector was disconnected to measure the pin voltage. The power supply of 5V, signal lines, and ground lines all showed no abnormalities. Replacing the throttle pedal did not resolve the issue.

11

4

Share

What does it mean when the ignition switch is in the ON position?

The ignition switch in the ON position means that all basic equipment except the starter is functioning normally. If the key is also in the ON position, all components of the vehicle are powered, including the engine system. The dashboard lights will illuminate, and the fuel pump will begin to build oil pressure. After approximately 5 to 10 seconds, when the fuel pump has fully built oil pressure, the dashboard needles will return to their original positions. Finally, pressing the start switch will start the vehicle. Meanings of other ignition switch positions: LOCK is for locking the car. Generally, when the key is placed in this position, the steering wheel is locked and cannot be moved significantly. ACC provides power to the entire vehicle, allowing the radio, lights, etc., to function normally, but the air conditioning cannot be used. The control process of the car's ignition switch: When the ignition switch is in the "OFF" position, turning the key to the "OFF" (shut) position connects the two internal contact points in the horizontal position, which means the external wires "black-white wire" and "green wire" are connected. If you measure the two wires with an ohmmeter at this time, they should be in a conductive state. In the actual vehicle, the connection of these two wires indicates that the entire circuit system has stopped working, the ignition system circuit is in a short-circuit state, and the engine is turned off.

7

0

Share

What to Do When Volkswagen Tiguan's Keyless Entry Fails?

If the engine can be started using the one-button start, it indicates that the internal antenna or the key battery is functioning properly. First, check the battery level of the key. It is best to visit a repair shop to read the fault codes for diagnosis.

6

4

Share

How Long After Passing Subject 1 Will Subject 2 Records Expire If Not Taken?

According to the "Regulations on the Application and Use of Motor Vehicle Driving Licenses," the validity period of the study driving certificate is three years, but the expiration date must not exceed the upper age limit for application. There are age restrictions for obtaining a driver's license, and the age requirements vary for different types of licenses. Article 11 of the "Regulations on the Application and Use of Motor Vehicle Driving Licenses" states that applicants for a motor vehicle driving license must meet the following requirements: For small cars, small automatic transmission cars, small automatic transmission passenger cars for the disabled, or light motorcycles, the applicant must be between 18 and 70 years old. For low-speed trucks, three-wheeled cars, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, or wheeled self-propelled machinery, the applicant must be between 18 and 60 years old. For city buses, large trucks, trolleybuses, or trams, the applicant must be between 20 and 50 years old. For medium-sized passenger vehicles, the applicant must be between 21 and 50 years old. For tractor-trailers, the applicant must be between 24 and 50 years old. For large passenger vehicles, the applicant must be between 26 and 50 years old. Applicants must complete Subject 2 and Subject 3 tests within the validity period. If the tests are not completed within the validity period, the passing scores of the already completed subjects will expire. Subject 1, also known as the theoretical driving test or driver theory test, is part of the motor vehicle driving license examination. The test content includes driving theory basics, road safety laws and regulations, local regulations, and other related knowledge. The test is computer-based and has a time limit of 45 minutes. Subject 1 consists of 100 single-choice and true/false questions, each worth 1 point. If 11 questions are answered incorrectly during the test, the system will automatically submit the test and end the session. Subject 1 test content includes: Driving license and motor vehicle management regulations; road traffic conditions and regulations; road traffic safety violations and penalties; road traffic accident handling regulations; basic knowledge of motor vehicles; local regulations; knowledge of braking systems and safety devices for large and medium-sized passenger and freight vehicles; specialized knowledge for wheeled self-propelled machinery, trams, and trolleybuses. Subject 1 test precautions: During the test, candidates should dress appropriately—no slippers are allowed. Electronic devices and bags are prohibited in the examination room. Bring your ID card and queue to enter the waiting hall. Observe the precautions and procedures displayed on the screen, and store personal belongings in lockers before entering the examination room. Upon entering the examination room, check your assigned seat at the identity verification counter. Once seated, begin the test. Ensure the camera is aligned with you and follow exam discipline. If you fail the first attempt, a retake is available on the same day. If you fail again, you must pay to reschedule. After completion, queue to collect your score report and sign it. Unsigned reports are invalid. There is no limit to the number of times Subject 1 can be scheduled. Each subject can be taken once, with one retake allowed if failed. If the retake is not attended or is failed, the exam session ends, and the applicant must reschedule. Subject 2 and Subject 3, however, allow only five attempts. Subject 2 and Subject 3 tests must be scheduled at least ten days apart. If the Subject 3 safe driving knowledge test is failed, the previously passed road driving skills test scores remain valid. There are three subjects in the driving test: Subject 1, Subject 2, and Subject 3. Subject 1 refers to the road traffic safety laws, regulations, and related knowledge test. Subject 2 refers to the field driving skills test. Subject 3 is divided into two parts: road driving skills and safe driving knowledge. The safe driving knowledge test is conducted after Subject 3, so it is commonly referred to as Subject 4. However, the official term (as per the Ministry of Public Security Order No. 123) does not include "Subject 4."

1

5

Share

How to Turn Off the Pedestrian Warning Sound on Wuling Hongguang Mini?

How to Switch Modes on Volkswagen's Digital Cockpit?

What are the wheel specifications for the Toyota Mark X?

Reasons for Throttle Pedal Signal 1 and 2 Rationality Fault?

What does it mean when the ignition switch is in the ON position?

What to Do When Volkswagen Tiguan's Keyless Entry Fails?

How Long After Passing Subject 1 Will Subject 2 Records Expire If Not Taken?

What Causes High-Speed Body Vibration in BMW 5 Series?

Where is the BMW moisture sensor located?

Why can the air pump only reach 4 bars of pressure?

Is it necessary to replace traditional wipers with beam wipers?