How to turn off the one-button start-stop function in Cadillac XTS?

1 Answers
LeRicardo
07/29/25 6:20pm
The one-button start-stop function button in Cadillac XTS is located on the center console, next to the gear shift lever. It features a circular arrow with an 'A' inside. If you do not wish to use this function, simply press the button to turn it off before driving. The automatic start-stop function in Cadillac XTS can automatically shut off the engine during idling or when the vehicle is stationary, and it quickly restarts when the brake is released. This feature enhances the vehicle's fuel economy. The Cadillac XTS measures 5131mm in length, 1852mm in width, and 1501mm in height, with a wheelbase of 2837mm. The vehicle is equipped with an electronic stability system, which includes four-wheel disc brakes, four-channel anti-lock braking system, full-function traction control, and StabiliTrak stability control technology.
Was this review help?
5
5
Share
More Forum Discussions

What are the symptoms of a faulty Focus water pump?

If the water pump of a Focus is damaged, the following symptoms may occur: 1. Unstable idle speed: If there is an issue with the water pump's rotation, it will directly affect the engine's speed, resulting in unstable vehicle speed. This usually occurs after the engine has been running for a while, and if the resistance is too great, the engine may stall. These symptoms can initially indicate a damaged water pump. 2. Coolant leakage: The area near the water pump on the engine is prone to leaks. In such cases, coolant may leave traces around the water pump's ventilation holes. An engine lacking coolant will "overheat," leading to increased wear and, in severe cases, smoke or even fire. At this point, it is essential to check whether critical parts of the cooling system (such as the cooling fan, radiator, water pump, etc.) are damaged. 3. Noise issues: A damaged water pump may produce abnormal sounds. The cause of the noise is likely due to internal bearing damage or a loose impeller that has detached from the shaft, creating unusual noises.
1
5
Share

Why is the gear shift jerkiness becoming increasingly noticeable in Jetta?

There are generally two main reasons for gear shift jerkiness in vehicles. The first type is caused by the transmission tuning or inherent structural design, while the second type results from insufficient maintenance. Here are detailed explanations: 1. Slowly release the clutch: During gear shifting, when the clutch reaches the semi-engagement point, you should pause briefly and then gradually release the clutch. This technique can significantly improve driving smoothness throughout the journey; 2. Maintain proper shift RPM: Try not to shift gears below 3,500 RPM. Different engines provide varying levels of power output, so maintaining the recommended RPM range is essential to minimize relative jerkiness.
11
1
Share

What is the function of the grille?

The functions of the grille are as follows: 1. Protective role: It protects the radiator and various components in the engine compartment from external impacts, mainly preventing larger stones from entering the engine compartment and damaging internal parts. 2. Decorative role: Without the grille, various pipelines and brackets in the engine compartment would be exposed, affecting the overall appearance of the vehicle. 3. Establishing a unique style: The grille serves as a brand-specific label. For example, BMW's kidney grille is a distinctive feature of the brand, representing its unique style. 4. Ventilation, air intake, and cooling: The engine requires air for operation, and the grille ensures that air can enter. However, in winter, when temperatures are low, excessive cold air should not be drawn into the engine. Therefore, the design of the grille must ensure sufficient air intake in summer while limiting the amount of cold air entering in winter. This is achieved through a perforated design, which also aids in cooling during summer.
18
4
Share

Can License Plates Be Replaced?

Generally, it is not allowed, but if the owner of the motor vehicle applies for a change of registration due to their residence moving out of or into the jurisdiction of the vehicle management office where the vehicle is registered, the vehicle license plate can be replaced. Below are the relevant regulations for license plate replacement: 1. National regulations: If the registered owner of a motor vehicle moves their residence out of the jurisdiction of the original vehicle management office, or if the ownership of the motor vehicle is transferred and the current owner's residence is not within the jurisdiction of the original vehicle management office, the current owner should, within 30 days from the date of moving out or the transfer of ownership, fill out the 'Motor Vehicle Registration Application Form,' submit the relevant documents, apply for a transfer registration, and have the vehicle inspected. 2. Ministry of Public Security regulations: According to Article 52 of the 'Motor Vehicle Registration Regulations' issued by the Ministry of Public Security, the following conditions must be met to apply for the use of the original motor vehicle license plate number: the application must be submitted within six months after the transfer or cancellation of registration; the owner must have owned the original motor vehicle for more than three years; all traffic violations and accident liabilities related to the original motor vehicle must be resolved.
8
2
Share

What is the Difference Between CVT and Automatic Transmission?

The difference between CVT and automatic transmission lies in the gear configuration and structural design. Most cars currently use either manual or automatic transmissions, where the drive chain and shifting principles are similar to those of a bicycle, involving gear-set shifting that results in noticeable jerking during gear changes. Below is a detailed comparison of the two: 1. Gear Configuration: CVT only shows directional changes like forward or reverse, while automatic transmission converts the shifting direction of manual transmission into a linear motion. 2. Structural Design: CVT lacks the multiple gears of a manual transmission, whereas automatic transmission retains the multiple gears of a manual transmission.
13
5
Share

What is the fuel consumption of the 1.8T Passat?

The actual fuel consumption of the Passat 1.8T is 6.8L per 100 kilometers. Here is the relevant introduction about the 2020 Passat: 1. Body: It belongs to the mid-size car category, with body dimensions of 4933mm in length, 1836mm in width, and 1469mm in height. The wheelbase is 2871mm, and the curb weight is 1470kg. 2. Configuration: The 2020 Passat features a front MacPherson independent suspension and a rear multi-link independent suspension. It is equipped with a 1.4T turbocharged engine, delivering a maximum horsepower of 150ps, a maximum power of 110kw, and a maximum torque of 250nm. It is paired with a 7-speed dual-clutch transmission.
18
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.