How to turn off the navigation in Tiguan L?

2 Answers
DeEthan
07/29/25 12:11am
The methods to turn off the navigation in Tiguan L: 1. There are settings in the navigation system to turn off traffic alerts, or you can press the navigation button again to access the stop function; 2. You can refer to the user manual for instructions or contact the manufacturer or the customer service of the 4S store for consultation. Taking the 2018 Tiguan as an example: its body dimensions are 4506mm in length, 1809mm in width, and 1685mm in height, with a wheelbase of 2684mm. In terms of power, the 2018 Tiguan L is equipped with a 2.0TSI high-power engine, with a maximum power of 162 kW and a peak torque of 350 N·m, paired with a 7-speed wet dual-clutch transmission.
Was this review help?
13
3
Share
ODelilah
08/12/25 4:28am
Regarding the navigation system in the Tiguan L, I often encounter it during daily driving. It's quite simple but requires attention to safety. When I want to turn it off while driving, I usually find a safe place to pull over or wait for a red light to operate it. Tap the central control touchscreen to enter the navigation interface, find the 'Stop Navigation' button, and click it; if a route is being planned, click 'Exit Route' and confirm. There is often an X icon in the upper left corner of the screen—tapping it will turn it off. After closing, the navigation voice stops, and the screen may return to the main menu or display the default screen. The multifunction buttons on the steering wheel can also switch modes: pressing the audio button directly switches to music playback, and the navigation automatically exits. Relatedly, the system still runs in the background, but it doesn't affect anything; setting up a voice command like 'Turn off navigation' before a long trip is more convenient. Personal experience tells me not to spend time on these things in congested urban areas, as distracted driving poses significant risks; if issues arise, check the manual or ask a technician during the next maintenance.
Was this review help?
15
2
Share
Expand All
More Forum Discussions

What are the new regulations for the load capacity of five-axle vehicles in 2020?

The overload and over-limit identification standard sets the total mass limit for two-axle vehicles at 18 tons. Below are relevant introductions about load capacity: 1. Standard load capacity: The general load capacity of household cars is 375 to 500 kg. It cannot be calculated in detail and must be based on the load capacity marked on the nameplate attached when the car leaves the factory. The national standard is 375 kg, meaning the load capacity of manufactured cars cannot exceed 375 kg. 2. Load conditions: There are two types of vehicle load standards: One is the vehicle load standard based on traffic and road administration, where two-axle vehicles should not exceed 20 tons, four-axle vehicles (front four, rear four) 24 tons, and eight-axle vehicles (front four, rear eight) 34 tons. The other is the vehicle load standard in the eyes of traffic police, which is based on the driving license, i.e., the tonnage specified on the factory certificate.
19
5
Share

What are the driving techniques for manual transmission in traffic jams?

Here is a detailed introduction to the driving techniques for manual transmission in traffic jams: 1. Starting on flat ground: When starting on flat ground, the vehicle will not roll back, so there is no need to use the brake-start method. Simply release the clutch to the half-engagement point. 2. Brake-start method: The brake-start method involves starting the engine while pressing the foot brake or using the handbrake. Release the brake when the vehicle shows signs of moving forward to complete the starting operation. 3. Acceleration and gear shifting during starting: Whether starting on flat ground or using the brake-start method, once the vehicle starts moving forward, gently press the accelerator. As the speed increases, gently release the clutch. You can press the accelerator while releasing the clutch. 4. Double-clutch technique for downshifting with a throttle blip: Press the clutch pedal and shift out of gear; release the clutch pedal and give a throttle blip (the amount of throttle depends on the speed change before and after shifting); press the clutch pedal again and engage the new lower gear.
16
2
Share

How Long Does It Take to Drive 100 Kilometers on the Highway?

It takes about an hour to drive 100 kilometers on the highway. Below are the regulations for driving on the highway: 1. Highway following distance regulations: When a motor vehicle is driving on the highway at a speed exceeding 100 km/h, it should maintain a distance of more than 100 meters from the vehicle in front in the same lane. When the speed is below 100 km/h, the distance from the vehicle in front can be appropriately reduced, but the minimum distance should not be less than 50 meters. 2. Highway speed limit regulations: The minimum speed for normal driving of motor vehicles on the highway should not be less than 60 km/h. For roads with 2 lanes in the same direction, the minimum speed for the left lane is 100 km/h; for roads with 3 or more lanes in the same direction, the minimum speed for the leftmost lane is 110 km/h, and the minimum speed for the middle lane is 90 km/h.
14
5
Share

What is the normal RPM range for daily driving?

During normal driving, the RPM typically ranges between 1000~3500. Here are 3 driving techniques: 1. Accelerate when changing lanes: After signaling, identify a safe gap, slightly accelerate while steering to merge lanes, aiming to be about 10KM/h faster than the following vehicle to avoid sudden braking; 2. Cornering technique: Slow down before entering the curve, accelerate halfway through for stability. Braking sharply during the curve may cause skidding or rollover; 3. Downshift for overtaking: When needing quick overtaking, first downshift to increase engine torque output. On mountain roads, get as close as safely possible to the preceding vehicle before overtaking to minimize overtaking distance.
12
3
Share

What is the reason why the seat belt light is still on after buckling?

The reason why the seat belt light remains on after buckling is that the seat belt is not properly fastened, or other doors are not closed properly. Below is relevant information about seat belts:1. Introduction to seat belts: Seat belts are safety components used in equipment, such as when riding aircraft or performing high-altitude work and artistic performances, to ensure safety. The main materials are polyester, polypropylene, and nylon. Seat belts do not only refer to the webbing; besides the webbing, seat belts are also assembled with other components. "Seat belts" have become a primary consideration for drivers and passengers and one of the most important performance features of a car. Traditional components ensuring safe driving, such as rearview mirrors and side door mirrors (traditional rearview systems), seat belts, AIRBAG (airbags), and ABS (anti-lock braking systems), are already familiar to most drivers and passengers and are commonly used in imported luxury cars.2. Product classification of seat belts: Pole work seat belts, area restriction seat belts, fall arrest seat belts.
2
1
Share

How many meters is the Nissan Sylphy?

The length of the Nissan Sylphy is 4631mm. Here is the relevant introduction of the Nissan Sylphy: 1. Body dimensions. The length, width, and height are 4631mm, 1760mm, and 1503mm respectively, with a wheelbase of 2700mm. It is a typical compact car body. Due to the Sylphy's smooth and rounded design style, the car does not appear large or long from the side, but the actual interior space is quite satisfactory. 2. Exterior design. It uses more curved surfaces to create an elegant shape, with few sharp body lines. The thick U-shaped chrome grille on the front is a classic Nissan family design, and the dart-shaped headlights are sharp and aggressive, combined with the honeycomb air intake grille, giving it a sporty appearance. 3. Interior design. It features a combination of minimal chrome and piano black with a large amount of matte black soft-touch materials. The soft line design makes the interior atmosphere more cozy, and the quality of the front and rear seats of the Sylphy is excellent.
7
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.