How to Turn Off the Navigation in Mercedes-Benz E300L?

1 Answers
Debra
07/29/25 10:29pm
Methods to turn off the navigation in Mercedes-Benz E300L: 1. Go to the additional settings in the interface settings; 2. You can use voice control by saying "Cancel navigation" in standard Mandarin to exit the navigation; 3. You can refer to the vehicle user manual for detailed instructions. In terms of power, the Mercedes-Benz E300L is equipped with a 2.0T inline 4-cylinder turbocharged engine, available in high and low power versions, paired with a 9-speed automatic transmission. The high-power version has a maximum power of 190KW, maximum horsepower of 258PS, and maximum torque of 370Nm; the low-power version has a maximum power of 180KW, maximum horsepower of 245PS, and maximum torque of 370Nm.
Was this review help?
5
0
Share
More Forum Discussions

Precautions for Driving Through Tunnels

Tunnel driving precautions are as follows: 1. When driving through a tunnel, it is essential to control the vehicle's speed before entering the tunnel, slowing down to prevent visual limitations once inside. Additionally, the speed should not exceed 6 kilometers per hour before entering the tunnel. 2. Maintain a safe distance from both the vehicle in front and behind. Sudden braking in a tunnel is dangerous as it makes it difficult for the following vehicle to avoid a collision. Therefore, maintaining a proper distance is crucial. If the vehicle behind is too close, use the brake lights to alert them—an effective preventive measure. 3. Avoid accelerating when approaching the tunnel exit. Some tunnels are located on mountainous roads with many turns, and there may be more turns immediately after exiting the tunnel. At this point, the eyes cannot immediately adjust from the darkness to the bright light outside, so it is important to slow down upon exiting the tunnel and wait for your eyes to adapt before accelerating. 4. Always turn on the headlights when inside the tunnel.
9
3
Share

Will Cleaning Carbon Deposits Affect the Engine?

Cleaning carbon deposits from a car will not affect the engine. Using gasoline cleaners helps remove carbon deposits inside the engine, effectively preventing the formation of carbon layers on metal surfaces. It gradually activates existing carbon particles and removes them over time, thereby protecting the engine from damage. The methods for cleaning carbon deposits in cars are as follows: 1. Additive Cleaning (Fuel Additives): Additive cleaning involves directly adding a cleaning agent to the fuel tank to mix with the fuel. When the vehicle is started, the cleaning agent enters the combustion chamber along with the fuel. As the cleaning agent enters the combustion chamber, it cleans the carbon deposits inside the engine to a certain extent. 2. Bottle Cleaning: Bottle cleaning, also known as no-disassembly cleaning, is a method currently promoted by many 4S shops. This method involves introducing the cleaning agent into the engine's intake pipe via a bottle, where it is sucked into the combustion chamber along with the intake airflow. During this process, the cleaning agent cleans the carbon deposits in the engine's intake tract and combustion chamber. 3. Disassembly Cleaning: Disassembly cleaning involves removing parts of the engine where carbon deposits have accumulated for cleaning. Although this method provides the best cleaning results, it is labor-intensive and time-consuming, so most 4S shops do not offer this service.
6
2
Share

What does GLS mean in cars?

GLS in cars stands for Grand Luxury Specification, indicating the high-end configuration among different versions of the same model: base specification, luxury specification, and grand luxury specification. Taking the Mercedes-Benz GLS as an example: its exterior dimensions are 5214mm or 5218mm in length, 1956mm or 2030mm in width, and 1823mm in height, with a wheelbase of 3135mm. The Mercedes-Benz GLS is equipped with either a 2.5T turbocharged engine or a 3.0T turbocharged engine, paired with a 9-speed automatic transmission. Its suspension system features a double-wishbone independent suspension, with a front-engine four-wheel-drive layout and electric power steering.
9
2
Share

Can a car be turned off without shifting to P gear?

A car can be turned off without shifting to P gear, but it may damage the transmission and engine. It is recommended to shift to P gear before parking and turning off the engine. The P gear mechanically locks the output shaft of the transmission to secure the car, preventing it from moving. If the car is turned off without shifting to P gear on uneven ground, it may move slightly. This happens because the P gear transmission has a locking mechanism that engages with the transmission gears. Any movement at this point can cause impact to the transmission gears, leading to slight forward movement of the car. The P gear is a common gear in automatic transmission vehicles, usually located at the frontmost position of the gear shift console, ahead of the R gear, designed to lock the axle and keep the car stationary on slopes.
18
3
Share

When to Use the External Circulation?

Use the external circulation on highways, in suburban areas, or in regions with good air quality. The external circulation refers to the air intake of the air conditioning blower coming from the outside, which supplements fresh air by using a fan to draw external air into the car. This means the external air passage is connected to the car, allowing ventilation, and the air blown by the fan originates from outside the vehicle. The external circulation should be used in conjunction with the car's heating system. When activated, it ensures a continuous supply of fresh air inside the car. During long highway drives with closed windows, the air quality inside the car can deteriorate. In such cases, the external circulation brings in outside air, maintaining a fresh atmosphere inside the vehicle.
5
3
Share

How to Turn on the Heater in a Sylphy?

The method to turn on the heater in a Sylphy is: 1. Press the knob with red and blue color buttons; 2. After ignition, wait for 5 to 10 minutes; 3. When the water temperature rises to the normal level, you can turn on the heater. Precautions for using the heater: 1. Wait for 8 to 15 minutes after starting the car until the water temperature reaches the normal level before turning on the heater; 2. Adjust the air conditioning circulation mode to the internal circulation and set it to the heater mode, i.e., the red zone; 3. Do not turn on the air conditioning as the heater utilizes the car's own heat cycle, saving energy. Adjust the fan speed and set the air conditioning to the appropriate level for the air outlet; 4. When parking for a long time, turn off the heater in time or roll down the window slightly to prevent carbon monoxide poisoning.
15
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.