How to Turn Off the Maintenance Reminder on Volkswagen?

1 Answers
MacMicah
07/29/25 9:51pm
Volkswagen maintenance reminder can be turned off by following these steps: 1. Turn off the ignition switch, press the clock adjustment button SET while turning on the ignition switch; 2. Release the SET button, then press the SET button once more, and turn off the ignition switch; 3. Turn on the ignition switch again to check if it has been reset. If not, you must start over from the beginning. Here is a brief introduction to the Volkswagen Lavida: its body dimensions are 4605mm, 1765mm, and 1460mm respectively, with a wheelbase of 2610mm. The design of the Lavida's dashboard has been slightly modified from the traditional Volkswagen style, eliminating the two small circular dials found on the Sagitar and instead using an onboard computer to provide relevant driving information. Additionally, the outer ring of the onboard computer is decorated with a circular chrome line, integrating it with the chrome-plated speedometer and tachometer.
Was this review help?
19
3
Share
More Forum Discussions

Can a Temporary ID Be Used for the Driving Test (Subject 3)?

A temporary ID can be used for the Subject 3 driving test. According to Article 56 of the "Regulations on the Application and Use of Motor Vehicle Driving Licenses," temporary IDs hold the same legal validity as permanent IDs during their 3-month validity period and can be used as official identification. Therefore, there is no issue with using a temporary ID for the Subject 3 test. Applying for a Temporary ID: The applicant must bring their household registration booklet and a recent 1-inch black-and-white photo (without a hat) to the local public security bureau where their permanent residence is registered. After staff verification, the temporary ID can typically be issued on the same day. Subject 3 includes the road driving skills test and the safety and civilized driving knowledge test, which are part of the motor vehicle driver's license examination. It is commonly referred to as the road driving skills and safety knowledge test. The passing score is 90 out of 100. A retake is allowed immediately if failed, and if unsuccessful, a re-examination can be scheduled after 10 days. The road driving skills test for Subject 3 includes: vehicle preparation, simulated light operation, starting, straight-line driving, gear shifting, lane changing, pulling over, passing through intersections (straight, left, and right turns), crossing pedestrian crossings, passing school zones, passing bus stops, meeting oncoming vehicles, overtaking, making U-turns, and nighttime driving. Subject 3 Test Precautions: Starting: Close the door, fasten the seatbelt, turn on the left signal, shift to 2nd gear, honk three times, check the left rearview mirror, slowly release the clutch while accelerating, and avoid rolling backward. Straight through an intersection: Speed between 20-30 km/h, no crossing the yellow line. Bus stop: Speed between 20-30 km/h, no crossing the yellow line. Right turn at an intersection: Signal left 3 seconds in advance, speed between 20-30 km/h, no crossing the line. Lane change: Signal left 3 seconds in advance, speed between 20-30 km/h, no crossing the boundary line. Overtaking: Signal left 3 seconds in advance, speed between 20-30 km/h, no crossing the boundary line. Left turn at an intersection: Signal left 3 seconds in advance, speed between 20-30 km/h, no crossing the line. Passing a school zone: Speed between 20-30 km/h, no crossing the line, no honking. Straight-line driving: Shift to 5th gear when speed exceeds 40 km/h, maintain speed above 40 km/h, no crossing the line. Accelerating: Shift to 5th gear when speed exceeds 40 km/h, maintain speed above 40 km/h, no crossing the line. U-turn: Choose an appropriate section, signal right to move to the far-right lane, stop, signal left, shift to 2nd gear, and perform a two-forward-one-reverse U-turn without rolling backward. Pulling over: Signal right for 3 seconds before stopping, ensure the right wheel is within 30 cm of the roadside, engage the parking brake, and shift to neutral. Subject 3 Deduction Criteria: Immediate failure for: Not wearing a seatbelt; Blocking or turning off in-car audio/video monitoring devices; Not following examiner instructions; Rolling backward over 30 cm when starting; Mismatched gear and speed for extended periods, causing engine RPM issues; Failing to shift gears twice consecutively while driving; Coasting in neutral; Ignoring traffic signals, signs, or markings; Not maintaining required speed; Driving over solid center or lane edge lines; Straddling lane dividers for over 15 seconds; Changing two or more lanes consecutively; Parking in prohibited areas (e.g., crosswalks, grid lines); Missing the scheduled test time. 10-point deduction for: Rolling backward under 30 cm when starting; Shifting incorrectly when starting or driving; Not using or misusing turn signals before starting, turning, changing lanes, overtaking, or stopping; Signaling for less than 3 seconds before maneuvers; Stalling the engine once due to improper operation. Vehicle Preparation: Failure to walk counterclockwise around the car to inspect its condition and surroundings results in disqualification. Starting: Immediate failure for: Insufficient brake pressure when starting; Starting with an unclosed door; Starting the engine without shifting to neutral; Not releasing the parking brake in time. 10-point deduction for: Starting without releasing the parking brake but correcting promptly; Not releasing the ignition switch after starting the engine. Gear Shifting: Failure to shift smoothly as instructed results in disqualification; Mismatched speed and gear incurs a 10-point deduction. Pulling Over: Failure if the vehicle exceeds the roadside or crosswalk line; Failure if the door is not closed after exiting; 10-point deduction if the vehicle is over 30 cm from the roadside; 10-point deduction for not engaging the parking brake fully; 10-point deduction for releasing the brake pedal before engaging the parking brake; 5-point deduction for not turning off the engine before exiting. Intersections (Straight, Left, Right Turns): Failure to slow down or stop as required results in disqualification. Pedestrian Crossings, School Zones, Bus Stops: Failure to slow down results in disqualification.
6
0
Share

Is Dayang Motorcycle a Domestic Brand?

Dayang motorcycle is a domestic brand. Introduction to Dayang Motorcycle: Dayang motorcycles have good quality and performance, with a wide variety of models and relatively rich configurations at reasonable prices. The performance of its high-end models is comparable to that of joint-venture brands, while its scooters and cross bikes are slightly weaker, on par with other leading domestic brands. Main Advantages of Dayang Motorcycle: The company has acquired more than 400 advanced domestic and international equipment units, introduced internationally advanced motorcycle product technology and equipment from Japan's Honda, and established multiple production lines including engine manufacturing, body welding, painting, blank die-casting, and complete vehicle assembly. This has formed a comprehensive and reliable system for technology, development, testing, and quality management.
5
4
Share

How long is the validity period after winning the lottery quota?

The validity period after winning the lottery quota is six months. Due to severe traffic congestion, the government has adopted a lottery system to limit the number of vehicle purchases. Only those who win the lottery are eligible to purchase and register a vehicle. If the relevant vehicle purchase and registration procedures are not completed within 6 months after winning the lottery, it will be considered as forfeiting the opportunity. However, if someone wins the lottery but does not purchase a vehicle, relevant penalties will be imposed to restrict the number of vehicle purchases. If the owner wishes to apply for the lottery again, they must not have any record of failing to use the incremental quota obtained through the lottery within two years. However, if the winner voluntarily returns the quota, no penalty will be imposed, and the returned quota will be added to the next month, increasing the chances for other participants to win the lottery and purchase a vehicle.
2
1
Share

What are the symptoms of a hydro-locked engine with a blown cylinder?

The symptoms of a hydro-locked engine with a blown cylinder are as follows: Significantly increased noise: When a cylinder blows, the piston overheats and expands, causing intense friction with the cylinder block. This friction results in abnormal engine noise. Noticeable engine vibration: In severe cases, black smoke may also be emitted. The expanded piston body inevitably hinders the piston movement within the engine, and when the friction between the piston and cylinder block increases, it causes severe engine vibration. Overheating of the radiator: Due to increased resistance in movement, the pressure inside the engine cylinder becomes significantly higher, which can easily lead to engine overheating.
12
2
Share

Can the oil leakage from a motorcycle carburetor be blocked?

Oil leakage from a motorcycle carburetor cannot be blocked. Reasons for oil leakage: Oil leakage from the small tube is caused by dirt in the carburetor, not blockage. The accumulated dirt in the fuel tank enters the carburetor through the fuel pipe and gets stuck on the float needle, preventing it from descending. As a result, the float cannot block the fuel inlet, causing gasoline to fill the float chamber and eventually overflow from the drain pipe when reaching a certain height. Introduction to the carburetor: Carburetors are divided into simple carburetors and complex carburetors. They can also be classified as downdraft and side-draft carburetors. Based on the throttle type, carburetors can be further categorized as rotary and lift-type. A rotary throttle is a disc-shaped throttle that rotates around an axis, located between the carburetor throat and the intake pipe, altering the cross-sectional area of the intake passage.
19
5
Share

What Are the Uses of Passenger Cars?

Passenger cars are vehicles used for transporting people and their personal belongings, and can be categorized into the following types based on their purposes. Sedan: Sedans, also known as passenger cars, typically have no more than 9 seats. They feature a distinct front (hood) and rear (trunk) design, making it easy to visually distinguish the engine compartment, passenger compartment, and luggage compartment. Bus: Buses have more than 9 seats and include urban buses, intercity coaches, and tourist buses. Trucks, commonly referred to as lorries, are primarily used for transporting goods. Tractor: Specifically designed for towing trailers or semi-trailers. Specialized Transport Vehicles: These are designed for transporting goods with special requirements, featuring dedicated cargo compartments and corresponding auxiliary equipment. Special Purpose Vehicles: Mainly used for performing other tasks, such as ambulances, fire trucks, garbage trucks, sprinkler trucks, and various engineering vehicles.
10
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.