How to Turn Off the Maintenance Reminder on the Lavida?

1 Answers
OEvan
07/29/25 12:53pm
Method to turn off the maintenance reminder on the Lavida: 1. Turn off the key, at which point the dashboard lights will go out; 2. Then, press and hold the maintenance reset button while turning the key to the on position. Wait a moment, and the maintenance cycle indicator will display normally; 3. Turn the key off and then back on to test whether the reminder has been successfully turned off. If not, repeat the process. In terms of body dimensions, the Lavida measures 4600 mm in length, 1700 mm in width, and 1500 mm in height, with a wheelbase of 2610 mm. Exterior-wise, the Lavida's front fascia design differs significantly from previous Volkswagen A-segment models, particularly its unique teardrop-shaped headlights. The traditional Volkswagen family grille and U-shaped front design are also carried forward and inherited in the Lavida.
Was this review help?
8
0
Share
More Forum Discussions

Why Can't the Car Key Be Inserted?

The reasons why the car key cannot be inserted are as follows: Keyhole blockage: There is debris or blockage inside the keyhole. Lock damage: The lock has been pried or damaged. Steering wheel lock: The steering wheel is locked. The solutions for inserting the car key are as follows: Frozen keyhole: Due to cold weather, try heating the metal part of the key with a lighter, and the key can then be inserted. Be careful not to burn the key; also, ensure the key matches the car and check for any foreign objects inside the keyhole. Steering wheel lock: If the key cannot be turned after insertion and the car cannot be started, first check if the steering wheel is automatically locked. This is part of the car's automatic anti-theft system, which locks the steering wheel when it is turned to a certain extent and fixes it within a certain range. Without inserting the key and turning the steering wheel, the car key cannot be turned.
18
0
Share

How Long Does Tire Sealant Last Once Applied?

Tire sealant lasts for four to six months once applied. Tire sealant is a mixture containing various high-molecular chemical materials. Usage: It is widely suitable for rubber tires on various electric vehicles, motorcycles, and small to medium-sized cars. It is particularly effective for tire punctures with diameters of about 1 to 5 millimeters and is an essential item to carry in the vehicle. Introduction to Tire Sealant: Tire sealant for motor vehicles is a pH-neutral, non-toxic, odorless, non-flammable, and non-sticky liquid. It can only provide a temporary repair for tire punctures up to 6 millimeters in diameter. This is merely an emergency fix; after the emergency repair, the tire should be inspected and properly repaired at the nearest repair shop when available.
20
5
Share

How many points are deducted for crossing a solid line at a highway exit?

Crossing a solid line at a highway exit results in a deduction of 3 points, as it violates the traffic rules by disregarding the directional markings. On-site traffic police penalties: Penalties may vary by region. Typically, such violations are not captured by electronic surveillance and are penalized by traffic police on-site. However, if a traffic accident occurs due to crossing a solid line, the driver will be held responsible for the accident. No U-turns or turns allowed: Apart from prohibiting lane changes, solid lines on highways also forbid U-turns and turns, which are common mistakes made by new drivers. Therefore, it's crucial to drive cautiously on highways, preferably at reduced speeds, to allow more reaction time for corrections and avoid violations. Whether it's a single yellow or white solid line, or double yellow or white solid lines, crossing them is prohibited. Sometimes, changing lanes across these lines may lead to driving in the opposite direction, which is extremely dangerous.
10
5
Share

What Causes the Car to Shake When Driving at High Speeds?

Causes of car shaking at high speeds are as follows: Severe engine carbon buildup: The most common cause of car shaking is a dirty throttle body or excessive carbon buildup in the fuel injectors. When there is too much carbon buildup inside the engine, the gasoline sprayed by the cold start injector can be largely absorbed by the carbon deposits, resulting in an overly lean air-fuel mixture during cold starts. Solution: Clean the fuel system and check the idle control valve for carbon buildup, then clean it thoroughly. Ignition system issues: Check the condition of the spark plugs, high-voltage wires, and ignition coils. Poor performance of the ignition system or weak spark plug firing can also cause such symptoms. Solution: Inspect the spark plugs for excessive carbon buildup and replace them if necessary. Unstable fuel pressure: Abnormal fuel pump pressure or incorrect readings and poor performance of the intake pressure sensor can lead to car shaking. Solution: Check the fuel pressure and replace components if needed. Aging engine components: Car shaking can also be related to worn engine mounts. Engine mounts act as the engine's shock absorption system, absorbing minor vibrations during operation. If the engine mounts are faulty, these vibrations can be transmitted to the steering wheel and cabin, causing shaking at idle. Solution: Replace the components.
14
0
Share

How Does the Cruise Control System Work?

The working principle of the cruise control system is: in the vehicle cruise control system, electronic devices can automatically adjust the engine throttle opening according to changes in driving resistance to maintain a constant driving speed. Precautions for using the cruise control system include: 1. For safety reasons, do not use the cruise control system in heavy traffic or during severe weather conditions such as strong winds or heavy rain; 2. When using the cruise control system, pay attention to whether the CRUISE indicator light on the dashboard is flashing; 3. When driving on steep slopes, the cruise control system should be turned off immediately; 4. During downhill driving, avoid accelerating the vehicle; 5. To prevent the cruise control system from malfunctioning, turn off the cruise control switch when the system is not in use.
9
4
Share

What Causes the Jerking Sensation During Car Acceleration?

Possible causes of jerking sensation during acceleration are as follows: Sludge in the transmission: Acceleration jerking and shuddering are often related to issues in the engine's fuel system, ignition, or intake systems. One possible cause is sludge buildup in the transmission fluid, which can circulate and clog the oil passages in the valve body, leading to jerking. Over time, this can result in transmission overheating, impact, slippage, and a series of other transmission problems. Engine fuel system: Next is the engine fuel system. The importance of engine oil is well-known—it provides sufficient lubrication, reduces resonance, and enhances engine smoothness. Prolonged oil deficiency can cause mild symptoms like insufficient power and increased fuel consumption, or severe consequences such as piston knocking and mechanical damage to related components. Additionally, fuel pump failure or clogged fuel filters can also reduce engine power. Intake system: Besides fuel, the engine also requires air. If components like the air filter or throttle body are clogged or malfunctioning, leading to insufficient air intake, the car may experience weak acceleration, slow speed increase, and jerking. The ignition system should not be overlooked either—if spark plugs misfire, leak, or fail to atomize properly, it can also affect engine acceleration.
16
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.