···
Log in / Register

How to Turn Off the Maintenance Reminder on the Changan CS75?

6Answers
SpencerDella
07/25/2025, 12:33:58 AM

The method to turn off the maintenance reminder on the Changan CS75 is as follows: 1. Turn the car key to the ON position, where the entire vehicle is powered; 2. Press the selection button on the steering wheel, then press the reset button for about 5 seconds, keeping the reset button pressed without releasing it; 3. Turn off the power, still without releasing the reset button, then turn the vehicle power back on to clear the reminder. The Changan CS75 is a compact SUV under the Changan Passenger Vehicle brand, with dimensions of 4650mm in length, 1850mm in width, and 1705mm in height, and a wheelbase of 2700mm. The vehicle is equipped with a Bosch MPC2Plus camera, which provides visual and audible alerts when deviating from the lane, enhancing driving safety.

Was this review help?
107
Share
MacPaul
08/11/2025, 08:24:16 AM

I also drive a Changan CS75, and turning off the maintenance reminder is quite simple: After parking and turning off the engine, turn the key to the ON position without starting the engine. Then press and hold the small button on the dashboard—usually labeled 'TRIP' or the mileage reset button—for a few seconds or more until the screen displays a reset message, then release. The warning light will go out immediately. However, this only turns off the reminder and doesn't mean the car is properly maintained. I suggest scheduling a visit to the shop soon to check the oil, filters, and other essentials. Regular maintenance can extend your car's lifespan and save you from major repairs. Last time, I nearly ran into trouble due to a delay, so now I make it a habit to reset the reminder right after each service. The car runs much quieter, and I feel more confident on long road trips. Daily driving requires attention to fluid change intervals—don’t wait for the warning to act.

Was this review help?
17
Share
Expand All
ClaraFitz
09/27/2025, 12:02:48 AM

Don't ignore safety when turning off maintenance reminders: This feature is designed to prompt timely maintenance, such as oil changes or brake checks. Incorrect operation or delays may lead to risks like engine stalling. My method is: First, ensure maintenance is completed, then turn the key to the ON position with the vehicle off. Press and hold the dashboard reset button for about ten seconds, releasing it only after the reminder disappears. Occasionally, button malfunctions may occur due to aging batteries or loose contacts—avoid excessive force to prevent damage. I've heard of cases where people mistakenly turned off reminders and missed maintenance, resulting in costly repairs. So after resetting, I mark my calendar to schedule the next service. Pay attention to unusual dashboard noises during daily driving, and develop a habit of regular maintenance for peace of mind.

Was this review help?
10
Share
Expand All
LaSerenity
11/10/2025, 01:02:23 AM

When I first started driving the Changan CS75, the maintenance reminder confused me. After some trial and error, I found it quite simple: park and turn off the engine, then turn the key to the ON position without starting the car. Quickly press and hold the button on the dashboard for five to seven seconds, and the reminder will be cleared. The button is usually located near the steering wheel or at a corner of the dashboard—give it a try, it's not complicated at all. After completing the reset, remember not to delay maintenance; change the oil and perform checks promptly. Next time you drive, it'll be quiet and hassle-free, which is quite convenient. Learning this little trick saves time and effort.

Was this review help?
18
Share
Expand All
JessicaLynn
12/31/2025, 02:48:54 AM

To turn off the maintenance reminder on the Changan CS75, follow the dashboard operation: After the vehicle is parked and turned off, turn the key to the ON position, then firmly press and hold the reset button for about five seconds until the screen changes and displays a successful reset. The button design may vary by model year; mine worked in the lower right corner. Remember, the purpose of resetting is to not overlook maintenance, such as the oil change interval. Once, my car's battery was weak and couldn't turn it off, but it was resolved after charging. Always pay attention to system stability to enjoy a worry-free driving experience.

Was this review help?
2
Share
Expand All
MacHope
03/28/2026, 04:29:01 AM

I use the Changan CS75 to pick up and drop off my kids, and the maintenance reminder keeps beeping annoyingly. Here's how to turn it off: Park the car and turn off the engine, then turn the key to the ON position. Press and hold the dashboard button for about ten seconds until the reminder disappears. It's simple and hassle-free, even for beginners. After resetting, I set a phone alarm to remind me of the next maintenance to avoid forgetting and potential hazards. In daily driving, pay attention to any unusual noises or flashing lights, and regular maintenance keeps the car running smoothly. Sharing this with family car owners—just a few steps to make life easier.

Was this review help?
18
Share
Expand All
More Q&A

How to reset the maintenance light on a Cadillac XTS?

Access the driver information center control buttons on the right side of the steering wheel to operate the instrument panel. The display will show the (Oil Life) interface. The message "Change Engine Oil Soon" will appear on the display. Press the "SEL" (Select/Confirm) button in the driver information center control area. Reset successful.
111
Share

How to Check Tire Pressure Monitoring on Honda UR-V?

Honda UR-V does not display tire pressure readings as it features a default monitoring system. Depress the brake pedal of the Honda UR-V to prepare for engine startup. All instrument panel lights on the Honda UR-V will illuminate. Press the tire pressure reset button to complete the operation.
112
Share

How to Turn Off the Maintenance Reminder on a BMW?

By holding down the button at the bottom left of the dashboard and turning on the ignition, after 5 seconds, the display will show the "SRV" prompt. Release the button, and the display will flash. Then press the button at the bottom left of the dashboard again, and the BMW maintenance reminder will be turned off. Here are the detailed steps: 1. With the engine turned off, press and hold the trip odometer reset button located below the tachometer. 2. Turn the ignition to the ON position and release the trip odometer reset button. The display will show the "SERVICE" indicator. 3. Pull out the minute button on the clock and turn it to the right. The mileage will appear on the display. 4. Turn off the engine to reset the reminder message. 5. Turn the ignition to the ON position, and the "SERVICE" indicator will disappear.
109
Share

What to do if the Q5 car is burning engine oil?

Cold engine burns oil but returns to normal after warming up. Remove the engine cylinder head and replace the valve stem seals. If blue smoke is still emitted from the exhaust pipe when the car reaches normal temperature, remove the oil pan and replace the piston rings.
116
Share

How to open the fuel tank cap of Toyota Prado?

Prado also adopts a mechanical lock. The fuel tank cap switch is located below the steering wheel. Press the fuel tank switch to open the fuel tank cap, which is located on the left side. After opening the fuel tank cap, you can refuel or adjust the fuel tank.
109
Share

How to Turn On Power with One-Key Start?

First, press the start button once. At this point, the one-key start button turns green, indicating that the vehicle's power is fully connected. The vehicle will perform a self-check and complete it. Then, press the one-key start button again to start the vehicle.
114
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.