···
Log in / Register

How to Turn Off the Maintenance Reminder in Lavida Tour?

4 Answers
EmeryFitz
07/29/25 5:41pm
The method to turn off the maintenance reminder in Lavida Tour is: 1. Turn off the ignition switch; 2. Press and hold the reset button on the dashboard while turning on the ignition switch; 3. Continue holding the reset button until the maintenance light enters the reset mode; 4. Press the menu button to turn it off. Taking the 2017 Lavida Tour Comfort Edition as an example, it belongs to the compact car category, with body dimensions of 4445mm in length, 1765mm in width, and 1485mm in height, with a wheelbase of 2610mm. The 2017 Lavida Tour Comfort Edition is equipped with a 1.2T turbocharged engine, delivering a maximum power of 81kW and reaching its maximum power at 5000rpm.
Was this review help?
1
0
Share
DelEmilia
08/14/25 9:06am
My Lavida hatchback's maintenance reminder keeps flashing, which is quite annoying. I first wanted to confirm if it's actually time for maintenance to avoid turning it off randomly and neglecting the car's condition. The general method is: turn the key to the ON position without starting the engine; then locate the odometer button or adjustment wheel on the dashboard; press and hold it for a few seconds until the maintenance reminder flashes or a reset option appears, then release and confirm. I tried this method twice before succeeding—the first time, the button wasn't pressed firmly enough. If there's no response, you might need to visit a professional shop to use an OBD tool to read the fault codes and reset it. I haven’t tried the tool operation myself, as I’m afraid of messing up the electrical system. Remember to perform maintenance promptly after resetting; otherwise, ignoring the reminder could lead to major issues with the engine or transmission system, such as dirty oil damaging internal components and increasing repair costs. In short, checking the vehicle manual or online tutorial videos beforehand can save a lot of hassle.
Was this review help?
5
5
Share
Expand All
BarrettAnn
10/13/25 8:26am
Driving the Lavida to work, I often encounter the glaring maintenance reminder. Turning it off requires caution to avoid damaging the electronic system with reckless operations. The core of the operation is resetting the settings: place the key in the ACC position, hold the dashboard button for five to ten seconds, and click OK when the reminder dims or a confirmation window pops up. If it fails, it might be due to low battery or a worn-out button, in which case it's advisable to drive to a 4S shop for a specialized computer fix. Actually, the maintenance reminder is there to prompt oil changes, brake checks, and tire inspections. Ignoring it could lead to safety hazards, such as engine overheating and damage from low oil. I always schedule maintenance immediately after turning it off, ensuring the car runs smoothly for longer, saving fuel and extending its lifespan. After all, the Lavida is for family use, so safety comes first. Remember to turn off air conditioning, radio, and other electrical devices before the operation to prevent system interference.
Was this review help?
7
4
Share
Expand All
MacKatherine
11/27/25 2:37am
I just figured out how to turn off the maintenance reminder on my Lavida XR (Lang Xing) and wanted to share a quick tip. Turn the key to the second position without starting the engine. There's an ODO or TRIP button on the dashboard - press and hold it until the warning light flashes or the reset menu appears, then confirm. The whole process takes less than a minute, and it worked for me on the first try. Important note: Make sure you've actually done the maintenance before doing this, otherwise you might forget about oil changes when the reminder disappears. This feature exists to schedule maintenance reminders, so turning it off too quickly isn't safe. My neighbor ignored this warning and ended up with increased engine noise, costing hundreds in repairs. The Lavida XR is quite durable, but regular maintenance extends its lifespan and gives you peace of mind while driving.
Was this review help?
18
4
Share
Expand All
More Forum Discussions

What is the motor power of the Changan Benben EV?

The motor power of the Changan Benben EV is 30kW and 55kW, with two different powertrain models: the EC260 and the EC360. The Changan Benben EV is a single-motor vehicle, and its motor is front-mounted, making it front-wheel drive. For microcars, there is insufficient space at the rear to install complex independent suspensions, so microcars typically use a torsion beam for the rear suspension. The torsion beam suspension is a common type of non-independent suspension, known for its simple structure, compact size, and minimal space requirements.
11
3
Share

What transmission is used in the Changan Eado manual version?

Changan Eado manual version uses a 5-speed manual transmission. The following are the relevant details: Features of the 5-speed manual transmission: The five-speed transmission adopts a two-shaft layout, eliminating the conventional intermediate shaft, and is a longitudinally mounted front-drive transmission integrated with the main drive bevel gear and differential. It receives engine power through the input shaft, changes speed via various gear sets, and utilizes the output shaft, main reduction gear, and differential gear mechanism to drive the front wheels. Introduction to Changan Eado: The Changan Eado is a compact sedan launched by Changan Automobile, available in two powertrain options: a 1.6L engine and a 1.4T turbocharged engine. The 1.6L engine delivers a maximum power of 128 horsepower, while the 1.4T engine produces a maximum power of 158 horsepower. In terms of the transmission system, the 1.6L model is paired with either a 5-speed manual transmission or a 6-speed automatic transmission, and the 1.4T model is matched with a 7-speed dual-clutch transmission.
11
0
Share

What is the fault when the EPS light is on in the Changan Honor?

When the EPS light is on in the Changan Honor, it indicates a fault in the power steering system, and the steering wheel will become heavier. The power steering systems in automobiles include: electric power steering system, electro-hydraulic power steering system, and mechanical hydraulic power steering system. The electric power steering system does not have hydraulic mechanisms; this system relies on an electric motor to provide steering assistance. The electro-hydraulic power steering system is actually developed based on the mechanical hydraulic power steering system. Both of these power steering systems have hydraulic mechanisms and require the use of power steering fluid. The electro-hydraulic power steering system simply adds some electronic systems to the mechanical hydraulic power steering system.
11
5
Share

How many cylinders does the Changan Benben have?

Changan Benben is equipped with a four-cylinder engine. The entire Changan Benben series uses a 1.4-liter naturally aspirated engine with a rotation speed of 6000 rpm. This engine is equipped with VVT technology and multi-point electronic fuel injection technology, and uses an aluminum alloy cylinder head and block. The engine is paired with either a 5-speed manual transmission or a 5-speed AMT transmission. The front suspension of the Changan Benben uses a MacPherson independent suspension, while the rear suspension uses a torsion beam non-independent suspension. Most microcars use torsion beam rear suspensions due to their simple structure, small size, and minimal space occupation. This type of suspension is very suitable for microcars, as it helps to expand the rear seating space and trunk space.
6
0
Share

What is the best engine oil for Changan Lingxuan?

Changan Lingxuan can use synthetic or mineral engine oil. This model offers two powertrain options: a 1.6L naturally aspirated engine and a 1.5T turbocharged engine. For models with naturally aspirated engines, mineral or semi-synthetic oil can be used; for turbocharged engine models, semi-synthetic or full-synthetic oil is recommended. The Changan Lingxuan features a three-bar horizontal grille combined with dynamic headlight and fog light designs, presenting an overall stable appearance. The vehicle dimensions are 4730mm in length, 1795mm in width, 1730mm in height, with a wheelbase of 2760mm.
1
3
Share

Does Installing an Engine Guard Plate Affect Heat Dissipation in Cars?

Engine guard plates do have an impact on vehicle heat dissipation, but the effect is minimal. The specific reasons are as follows: 1. The heat dissipation performance of an engine is primarily reflected in the front grille, engine compartment design, water pipes, and radiator design, with only a small portion dissipating through the chassis. 2. Engine guard plates are custom-designed protective devices for various vehicle models. Their primary purpose is to prevent mud from encasing the engine, which could lead to poor heat dissipation, and secondly to protect the engine from damage caused by impacts from uneven road surfaces during driving. Through these designs, they aim to extend the engine's service life and avoid vehicle breakdowns due to external factors causing engine damage during travel.
20
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.