
The method to cancel the maintenance light on the Suzuki Alivio is as follows: 1. Switch the dashboard to display the remaining mileage interface. 2. Press and hold the small protruding button on the right side of the dashboard for more than 5 seconds, and the OIL indicator will appear in the lower right area of the dashboard. 3. Quickly press the small protruding button on the right side of the dashboard 5 times within 2 seconds. 4. The OIL indicator will flash 3 times, indicating the reset is complete. Below is some relevant information about the Suzuki Alivio: The Suzuki Alivio is positioned as an A+ class sedan, with dimensions of 4545 mm in length, 1730 mm in width, and 1475 mm in height, and a wheelbase of 2650 mm. In terms of configuration, this car is equipped with a 6.5-inch display, automatic air conditioning, rear sunshade, keyless start, cruise control, and more.

I've also encountered the issue of the maintenance light coming on before, and it can be quite annoying. For cars like the Suzuki Ciaz, when the light comes on, it's just reminding you that it's time for maintenance. Turning it off is actually quite simple: sit in the driver's seat, make sure the car is turned off, and the key is removed. Then, locate the Trip or Reset button on the dashboard, press and hold it, turn the key to the ON position without starting the engine, wait about 5 seconds, and release the button once the light goes off. If it doesn't turn off, you might not have done it correctly—try repeating the steps a few times. Remember, the maintenance light coming on is a good thing; it means your car cares about your safety, so don't ignore it by forcing it off. My suggestion is to turn off the light promptly after each maintenance to keep accurate records. Different models of the Ciaz might have slight variations, so checking the owner's manual is the safest bet—it has detailed diagrams to avoid messing up the system. In short, it's easy to handle, so don't stress too much about it.

As someone who enjoys tinkering with cars, I find the maintenance light on the Suzuki Ciaz quite interesting. The principle is this: there's a timer or mileage counter inside the system, and when it reaches the set value, the light comes on to remind you to change the oil or perform a check. To turn off the light, hold down the Reset button on the dashboard, turn the key to the ON position without starting the engine—this operation resets the computer's memory. Specific steps: turn off the engine, press and hold the button for about 10 seconds, release once the light goes off. However, the button location may vary depending on the model year of the Ciaz, sometimes near the steering wheel, so be patient and try different spots. If it doesn’t work, don’t force it—misoperation could potentially lock the system. I recommend turning off the light immediately after maintenance to protect the car and save hassle. I’ve often found this light design user-friendly; developing the habit leads to better driving conditions.

Be cautious when turning off the maintenance light. This warning light on the Ciaz indicates it's time to check if maintenance has truly been performed—don't rush to reset it. Here's the procedure: Sit in the car with the key in OFF position, press and hold the dashboard Reset button, turn the key to ON for about 5 seconds until the light goes off, then release. Ensure quick and precise operation to avoid damaging internal circuits through repeated button presses. While resetting isn't complicated, safety comes first—always verify maintenance completion beforehand. If unfamiliar with the process, visit a repair shop or dealership for professional assistance; it's faster and more reliable. Remember, the light serves as a maintenance reminder—after resetting, continue regular servicing to keep your vehicle in optimal condition.


