···
Log in / Register

How to Turn Off the Lock Sound on Buick Excelle?

4 Answers
Hernandez
07/29/25 6:01am

Method to turn off the lock sound on Buick Excelle: Click Config to enter settings, go to the second-to-last option 'Vehicle Settings,' select 'Smart Remote Key Settings' within the vehicle settings, then choose the second option 'Lights Only' under 'Remote Lock Light and Horn Feedback.' For the luxury version, you can find a 'Car' option on the main navigation screen, where you can set whether the lights turn on or the horn sounds when locking the car. The dimensions of the Buick Excelle are: 4609mm in length, 1798mm in width, and 1486mm in height, with a wheelbase of 2640mm. Its engine has a maximum power of 120kw and a maximum torque of 230nm.

Was this review help?
20
2
Share
Joe
08/12/25 8:54pm

I've been driving a Buick Excelle for several years and found that turning off the car lock sound is actually quite simple. First, sit in the driver's seat, start the vehicle or power it on without starting the engine, then tap the main menu on the center display. Select 'Vehicle Settings' or 'System Settings'. Once inside, look for 'Door Locks' or 'Comfort Settings' - there's usually an option called 'Lock Confirmation Sound' or something similar, just turn it off. For models without a screen, older versions might require using the remote key fob, like pressing both the lock and unlock buttons simultaneously for a few seconds - check the manual for specific instructions. However, I must remind you that this sound is part of the anti-theft feature. After disabling it, make sure to manually pull the door handle to confirm it's locked every time to prevent theft from improper locking. Turning off the sound is neighbor-friendly in quiet residential areas, but I recommend only doing this near your own home. The operation isn't difficult, but don't forget to periodically check your settings.

Was this review help?
16
3
Share
Expand All
AlainaAnn
10/03/25 8:34am

Bro, turning off the Buick Excelle's lock beep is super easy. Don't overthink it: start the car, tap the center screen to enter settings, scroll to the vehicle or comfort section, and find the door lock chime switch to turn it off. If there's no screen, try pressing and holding the lock and unlock buttons on the remote key for five seconds—silent mode might activate. Test it a few times after to check. Honestly, turning off that beep brings peace, especially when returning to the neighborhood late at night without disturbing others. But from a safety perspective, that chime is originally for anti-theft—if disabled, don't ignore lock confirmation; you can rely on flashing lights as an alternative reminder. Some model years can adjust this via an app, but most Excelle models handle it locally. If unsure, ask customer service or check online tutorials.

Was this review help?
4
4
Share
Expand All
DeJoel
11/17/25 3:25am

From a technical perspective, disabling the lock confirmation sound on a Buick Excelle involves the vehicle's electronic control module. During operation, ensure the vehicle is powered on; access the settings menu on the central display, navigate to the door lock or anti-theft system options, and turn off the audible alert function. Some systems may require adjustments through engineering mode, but the General Motors owner's manual should suffice—locate the relevant section and proceed directly. The key lies in the BCM module controlling the sound output; disabling it won't affect the locking mechanism. However, since the sound serves as a safety reminder, assess risks before disabling, prioritizing modifications in low-risk areas. If unsuccessful, connect an OBD interface or use professional tools to reset. In short, the steps are concise: prioritize resolving through the settings menu.

Was this review help?
12
4
Share
Expand All
More Forum Discussions

What is the curved panel above the wheel called?

The curved panel above the wheel is called a fender. Fender: The fender is a body outer panel that covers the wheel, named for its resemblance to a bird's wing in shape and position on older vehicle bodies. Based on installation location, it is divided into front fenders and rear fenders. The front fender is installed at the front wheel area and must ensure maximum clearance for wheel rotation and jumping. Therefore, designers use "wheel travel diagrams" to verify whether the fender's design dimensions are appropriate based on the selected tire model and size. Fender location: The fender is positioned above the vehicle's wheels, serving as the outer panel on the vehicle's side, and is molded from resin. The fender consists of an outer panel section and a reinforcement section integrally formed from resin. The outer panel section is exposed on the vehicle's side, while the reinforcement section extends along the edge of the outer panel section adjacent to neighboring components. Additionally, an engagement section for fitting with adjacent components is formed between the outer panel's edge and the reinforcement section.
9
2
Share

Can Temporary License Plate Speeding Violations Be Captured?

Temporary license plate speeding violations can be captured. Here are the detailed explanations: Current surveillance facilities are highly intelligent: High-definition surveillance cameras are installed on highways to capture speeding, illegal parking, and other violations 24/7. Additionally, mobile speed detection vehicles patrol highways continuously. Many intersections are equipped with smart electronic police, and road patrol officers have significantly increased, equipped with body cameras, forming an evidence chain to collaboratively enforce traffic laws. Penalties for speeding: Speeding within 10% results in a warning. Speeding between 10%-20% incurs 3 penalty points, 20%-50% incurs 6 points, and exceeding 50% incurs 12 points, along with varying fines.
4
3
Share

Can an A2 driver's license with 9 points deducted be reviewed on 12123?

It cannot be reviewed on the 12123 platform. It is recommended to bring your ID card, driver's license, and vehicle registration certificate directly to the traffic police station's violation handling window for verification. Annual Review Considerations: During the annual review, the vehicle management office will inspect the vehicle's lighting. If the vehicle's lights are found to be too dim or too bright, it will be deemed unqualified and will not pass the annual review. If the lights are too dim, check the lighting circuit and bulbs for aging, and replace the relevant components if necessary. If xenon headlights have been installed, it is recommended to restore the original headlights before the annual review to pass the inspection. Annual Review Procedures: First, after submitting the review application, the vehicle will undergo an online inspection. The vehicle will be driven into the automatic inspection area to sequentially check whether the exhaust emissions, speed, lighting, side slip, and chassis meet the standards. All items must pass to proceed. Next is the appearance inspection, verifying the vehicle's license plate, type, body color, engine number, VIN code, and frame number for accuracy. Then, the body appearance will be inspected, including details such as the bumper, engine compartment, rearview mirrors, lower mirrors, window glass, paint, engine operation status, and the interior and wheels of passenger vehicles. Finally, the owner can obtain the inspection report and application form from the inspector. If all inspection items pass, the owner can proceed to pay the inspection fee and collect the vehicle registration certificate and qualification label. If any items fail, the owner must repair them and participate in a re-inspection until they pass before proceeding with the visa procedures.
17
0
Share

Is There Intentional Elimination in Subject 2 Driving Test?

Subject 2 does not involve intentional elimination. As long as you truly master traffic regulations and driving skills, you will definitely pass the Subject 2 test smoothly. Content of Subject 2 assessment: Subject 2, also known as the small road test, is part of the motor vehicle driver's license examination. It is the abbreviated term for the field driving skills test. For the C1 license, the test items include five mandatory components: reverse parking, parallel parking, stopping and starting on a slope, right-angle turns, and curve driving (commonly known as S-curve). Some regions may include a sixth item: highway toll card collection. For the C2 license, the test includes four mandatory components: reverse parking, parallel parking, right-angle turns, and curve driving (commonly known as S-curve). Precautions for Subject 2 test: When performing reverse parking, pay attention to controlling the speed. Starting must be completed within 30 seconds; during parallel parking, maintain a proper 30cm side distance and reference points; during curve driving, adjust the vehicle body slowly to ensure the wheels do not cross the lines; during right-angle turns, find the right moment to steer the wheel.
3
5
Share

What does one-touch power window mean?

One-touch power window refers to a system where the car window glass can be controlled to move up or down to the desired position with a single press of a button. Overview of one-touch power window: The one-touch power window function is a system where the car window glass can be controlled to move up or down to the desired position with a single press of a button. It is mainly designed for the convenience of drivers and passengers, avoiding the distraction caused by manually operating the windows and thereby improving safety. Usage method: When using it, you need to hold down the switch, and release the button when the window reaches the desired position, stopping the movement. Cars equipped with one-touch power windows have a two-stage window control switch. The first stage functions the same as a regular power window. The second stage allows you to press and release the button, and the window will automatically open or close completely.
8
4
Share

How many inspections per year are required for a car after 15 years?

Twice. Below are the relevant details: 1. Regulations: Small and micro non-operational passenger vehicles must undergo inspection once every 2 years within the first 6 years; once every year after exceeding 6 years; and once every 6 months after exceeding 15 years. 2. Requirements: During power inspection for private vehicles, the chassis output power must not be lower than 60% of the engine's rated power or 65% of the maximum net power. Additionally, the new standard stipulates that vehicles failing safety or environmental standards during an inspection cycle will be mandatorily scrapped. The power inspection will replace the current fuel consumption test to phase out vehicles with poor performance indicators.
12
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.