···
Log in / Register

How to Turn Off the Lights on the Trumpchi GS8?

1 Answers
VanCourtney
07/29/25 4:37pm

Turn the control lever on the left side of the steering wheel to the OFF position to turn off all vehicle lights. If you only want to turn off the high beams, pull the control lever toward the driver to return to normal mode, which will turn off the high beams. Below is a detailed introduction to the use of high and low beams: 1. Low beams and high beams are collectively referred to as car headlights. 2. Turn the light switch to the low beam position to activate the low beams. For daily driving, simply turning on the low beams is sufficient. Use high beams when there are no streetlights or when the road is straight and distant with poor visibility. 3. Push the high beam lever forward to keep the high beams on continuously; push it inward once to flash the high and low beams alternately. When using high beams, always turn them off when encountering oncoming traffic and turn them back on after passing to avoid dazzling the other driver and causing accidents.

Was this review help?
5
1
Share
More Forum Discussions

How to Set Up Power Seats?

Power seat setup method is: 1. Push the control button forward or backward to move the seat to the desired position, and release the button to lock the seat in that position; 2. Move the front or rear part of the control button up or down to adjust the height of the front or rear part of the seat; 3. Tilt the corresponding control button forward or backward to adjust the angle of the seat back. Release the button at the desired angle to lock the position. The entire power seat system generally consists of a bidirectional motor, transmission device, and seat adjuster. Most motors use compact and high-power permanent magnet motors, usually controlled by switches mounted on the left side panel or left door armrest. The switches allow the motor to move in different directions.
20
5
Share

Does the Outlander 2.4 engine shake?

The Outlander 2.4 engine does not shake. If shaking occurs, it is due to engine malfunction and requires step-by-step troubleshooting. Prolonged idling of the car can lead to carbon buildup in the engine. Shaking of the vehicle during idling is generally caused by carbon deposits on the engine, throttle valve, and fuel injectors. These are the main reasons for engine shaking. The front of the Outlander appears very solid, with the inverted triangular bulge on the engine hood extending down to the top of the bumper, and the front air intake is split into two parts. The slightly protruding design of the lower body gives a full appearance. However, compared to the original version, the modifications claimed by BAIC to suit China's conditions can be understood as watered-down changes.
5
1
Share

What are the reasons for the Beijing Hyundai Elantra's generator not charging?

Reasons for the Beijing Hyundai Elantra's generator not charging: Broken or detached connecting wires between the battery and the generator, regulator failure such as improper adjustment leading to low voltage, oxidation, burning, contamination of the low-speed contacts, or contact with high-speed contacts resulting in no excitation current, among other factors. The tension-filled lines and surfaces at the front of the car, along with the wavy overall exterior waistline on the side of the body, are one of the Elantra's distinctive appearance features. The smooth, slender wavy waistline fully showcases the Elantra's agile characteristics, enhancing the elegant and grand visual feel of the side body. The integrated rear bumper and the lines of the taillights blend seamlessly, setting a strong and powerful visual tone for the overall effect of the rear.
9
2
Share

What does ACC in a car mean?

ACC in a car means: When the ACC light is on, it can supply power to the car, as well as to the audio system and lights. It is the power supply indicator of the car. The function of ACC is that if you want to drive, it will automatically turn off during ignition to provide power to the car, and it can resume normal operation after ignition is completed. The car power supply, also known as a power inverter, is a device that can convert DC12V direct current into AC220V alternating current, which is the same as the mains electricity, for use by general electrical appliances. It is a convenient power converter and is named as such because it is commonly used in cars. The car power supply is not only suitable for vehicle systems but can also be used in any situation where there is a DC12V power source. It converts DC12V into AC220V alternating current, bringing convenience to people's lives.
4
1
Share

What to Do When There is a Gear Exclamation Mark on the Dashboard?

If there is a gear exclamation mark on the dashboard, you must not continue driving. Call the 4S store as soon as possible and request assistance from professionals. The gear exclamation mark warning light on the dashboard is the TCU fault indicator, which is the transmission system warning light. When this symbol appears, it indicates an abnormality in the transmission. TCU refers to the automatic transmission control unit, which enables automatic transmission adjustment, making driving simpler. The TCU fault indicator light may illuminate due to oil leakage from the transmission housing or oil pan. One reason could be aging seals causing poor sealing, while another reason might be manufacturing defects leading to porosity in the housing.
7
4
Share

What brand is the engine of the Geely Xingrui?

The engine used in the Geely Xingrui is from Volvo. The Geely Xingrui is equipped with a Volvo Drive-E series 2.0TD direct-injection turbocharged engine. The engine model of the Geely Xingrui is JLH-4G20TD, with a maximum horsepower of 190 hp, a maximum power of 140 KW, a maximum power speed of 4700 rpm, and a peak torque of 300 N.m. For daily maintenance of the Geely Xingrui's engine, the following methods can be used: Use lubricating oil of the appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected according to mechanical load, with the selection standard not lower than the manufacturer's requirements. Regularly change the oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, causing various problems for the engine. To avoid faults, oil should be changed regularly based on usage conditions, and the oil level should be kept moderate. When oil passes through the fine holes of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter becomes clogged and oil cannot pass through the filter element, it may rupture the filter element or open the safety valve, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication area, accelerating engine wear and increasing internal pollution. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. When the amount is small, it remains suspended in the oil; when large, it precipitates from the oil, clogging filters and oil passages, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.