···
Log in / Register

How to Turn Off the Lights on a Toyota Camry?

3 Answers
Andrew
09/02/25 8:29am
Toyota Camry's light turning off method: Place the switch in the AUTO position, and the automatic headlight sensor will activate the headlights accordingly. When adjusted to AUTO mode, the headlights will automatically turn on when the driving environment becomes dark and turn off when it brightens. The Camry is a model under GAC Toyota, with the luxury version featuring a large trapezoidal horizontal grille, a streamlined body posture, a lower waistline, and an extended roof rear section that increases rear headroom. In terms of body dimensions, the Toyota Camry measures 4825mm in length, 1820mm in width, and 1485mm in height.
Was this review help?
4
1
Share
McRhett
09/15/25 3:36am
To operate the lights on a Toyota Camry, primarily use the light control stalk located on the left side of the steering wheel. Having driven for five years, I can confirm that the Camry features automatic headlights. Simply turn the control stalk to the AUTO position, and the lights will automatically turn on when it gets dark or when entering a tunnel. They will also turn off automatically after you turn off the engine and lock the car, so you don't have to worry about it. If you need to manually turn off the lights, just switch the control stalk to the OFF position. Note that in newer Camry models, if the lights are left on after turning off the engine, the system will automatically cut power after a few minutes to protect the battery. However, older models don't have this feature, so forgetting to turn off the lights overnight could drain the battery, potentially leaving you unable to start the car the next day. Daytime running lights cannot be turned off as they are required by law for safety. If you've modified the wiring, make sure to instruct the technician not to tamper with the original vehicle circuit module.
Was this review help?
18
0
Share
Expand All
DelJulia
10/29/25 4:13am
As a frequent Camry commuter, the most hassle-free way to handle lights is using auto mode. The light control stalk is clearly marked - the AUTO position lets the car automatically sense lighting conditions to turn lights on/off. To completely shut off lights, just rotate the knob to OFF (only daytime running lights remain on). Once I forgot to turn off lights after parking, but discovered the new Camry is smart enough to automatically cut power after a few minutes. However, my colleague's older model couldn't do this and drained the battery overnight, so extra caution is needed with older cars. When waiting temporarily, if you don't want headlights drawing attention, simply turn the stalk to the parking light position - this saves much more power than using hazard lights.
Was this review help?
14
4
Share
Expand All
More Forum Discussions

Which automobile company does the Lynk & Co 03 belong to?

Lynk & Co 03 is the third mass-produced model under the Lynk & Co automotive brand. Below are some details about this vehicle: 1. Exterior Design. The front features a split-type headlight assembly, paired with a horizontal front grille and lower decorative strip. The side profile maintains a traditional three-box sedan silhouette with smooth C-pillar lines, while the rear adopts 'L'-shaped taillights and a black decorative panel integrating reflectors. 2. Interior Design. The Lynk & Co 03 adheres to the brand's family design language, featuring a wrap-around sporty cockpit, a driver-centric integrated smart center console, race-inspired air vents, and a D-shaped sport steering wheel. The three-spoke steering wheel comes with multifunction buttons and is complemented by a digital instrument cluster. 3. Powertrain. The Lynk & Co 03 is powered by a 1.5TD high-efficiency engine from the Drive-E series. The turbo engages at 1000 rpm, delivering 150N·m of torque, and reaches its peak torque of 265N·m at 1500 rpm.
11
4
Share

How to reset the tire pressure light on Emgrand GL?

Emgrand GL tire pressure light reset method: Inflate the tires to the standard pressure to eliminate the tire pressure light; or press the MENU button on the turn signal lever, select the tire pressure display item in the mileage/fuel information menu, and then press the Set/Clr button. The driver information center will display "Tire Pressure Relearn," select "Yes," press the Set/Clr button, and the horn will sound twice to reset. There are generally three reasons for abnormal tire pressure: Abnormal tire pressure: Usually, an alarm will trigger if the pressure is below 1.8 bar or above 3.0 bar. In this case, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure is not reset in time, the tire pressure monitoring system will still record the previous data, causing the tire pressure monitoring light to illuminate. A simple tire pressure reset will resolve this issue. Damaged tire pressure sensor: The tire pressure sensor, which monitors tire pressure, is installed inside the tire and connected to the tire inflation valve. If the sensor is damaged due to impact while driving, the tire pressure warning light will illuminate. For sensor damage, the only solution is to replace it with a new part.
14
5
Share

Do I still need to engage the electronic handbrake when in P gear?

Yes, it is necessary. The electronic handbrake is a technology that achieves parking braking through electronic control. For prolonged parking, the handbrake must be engaged; otherwise, it may damage the locking mechanism of the automatic transmission. Here is some relevant information about the electronic handbrake: 1. Principle: The electronic handbrake is a technology that achieves parking braking through electronic control. Its working principle is the same as that of a mechanical handbrake, both relying on the friction generated between the brake disc and brake pads to control parking braking. The only difference is that the control method has changed from the previous mechanical handbrake lever to an electronic button. 2. Function: The electronic handbrake has evolved from the basic parking function to include the automatic parking function AUTO-HOLD. The application of AUTO-HOLD automatic parking technology eliminates the need for drivers to maintain prolonged braking when the vehicle is stationary. When the automatic electronic parking brake is activated, it can prevent unnecessary sliding of the vehicle.
3
5
Share

How to Adjust the Seat?

Adjusting the seat involves the following steps: 1. Adjust the distance between the seat and pedals: The driver's legs should remain slightly bent when fully depressing the pedals, ensuring comfortable pedal control. 2. Adjust the distance between the steering wheel and the driver: Extend your arms straight to rest on the top of the steering wheel, with your wrists naturally touching the wheel's edge. 3. Adjust hand positioning on the steering wheel: Place your left hand at the 9 o'clock position and your right hand at the 3 o'clock position. Keep your thumbs on the outer edge of the wheel without hooking them inward, to maintain steering flexibility and prevent finger injuries during emergency maneuvers.
6
0
Share

What are the differences between the Audi A6 Dynamic and Elegance models?

Audi A6L Dynamic and Elegance models differ mainly in three aspects: body length, curb weight, and exterior configurations: Body length: The Audi A6L Elegance model has a body length of 5038mm, while the Dynamic model measures 5050mm. Curb weight: The Audi A6L Elegance model weighs 1810kg, whereas the Dynamic model weighs 1830kg. Exterior configurations: Compared to the Elegance model, the Dynamic model features a sport appearance package. Apart from these three differences, all other aspects of the Audi A6L Dynamic and Elegance models are identical. In terms of power, both are equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 224Ps, maximum power of 165KW at 5000-6000rpm, and maximum torque of 350NM at 1600-4500rpm. In terms of configurations, both models come standard with 360-degree panoramic imaging, cruise control, engine start-stop technology, automatic parking function, hill-start assist, and more. The interior includes a multifunctional steering wheel, a trip computer display screen, and a 12.3-inch full LCD instrument panel.
12
1
Share

What Causes Cracks on the Sidewall of Car Tires?

The reasons for cracks on the sidewall of car tires are: 1. Natural aging of the tire; 2. Impact damage to the tire. Precautions for using car tires include: 1. When inflating tires, reduce the tire temperature to normal levels to avoid affecting pressure judgment; 2. Inflate to around 2.5bar; 3. Regularly check the wear level of car tires; 4. Avoid exposing tires to high temperatures. The extent to which tire cracks require replacement is: 1. Cracks appear on the tire sidewall; 2. Cracks are too long or deep, reaching the standard tread depth of 1.6mm; 3. Tire bulging occurs; 4. Wavy cracks on the tire surface; 5. Obvious scratches or punctures on the tire surface.
14
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.