···
Log in / Register

How to Turn Off the Headlights on a Toyota Corolla?

4 Answers
VictoriaDella
07/29/25 12:37pm

The lighting controls for the Corolla are all integrated into the lever on the left side of the steering wheel. The lever can be rotated. Turning the knob forward one notch turns on the parking lights. Then, continue rotating forward to turn on the low beams. With the low beams on, push the entire lever forward to activate the high beams. To turn off the high beams, simply pull the lever back to its original position.

Was this review help?
2
2
Share
OJoy
08/14/25 12:27am

Forgetting to turn off the lights while driving is a big no-no, especially for cars like the Toyota Corolla. If the lights are left on when the engine is off, the battery could be drained overnight, leading to troublesome towing expenses. Turning off the lights is simple—just locate the control lever on the left side of the steering wheel, find the knob at the top, and gently twist it to the "Off" position. Most Corollas come with an automatic headlight system; if set to "Auto" mode, the lights will turn off automatically when the engine is shut off based on ambient light conditions. However, in manual mode, you’ll still need to twist the knob. Having driven a Corolla for years, I recommend always checking the knob’s position to avoid surprises. The car is equipped with a light sensor that keeps the lights off in bright environments and turns them on in the dark, making the design very user-friendly. Still, developing good habits to protect the electrical system is crucial.

Was this review help?
3
5
Share
Expand All
SanCatherine
10/09/25 4:53am

Hey, newbie driving a Corolla, don't worry about turning off the lights—it's super easy! After you sit in the driver's seat, look for the thin lever on your left. Just twist the knob at the top with your fingers and turn it to 'Off.' Many Corolla models come with automatic lights—if you've set it to 'Auto,' the lights will turn off automatically when you shut off the engine, so no need to stress. Still, it's best to glance at the knob before starting the car to make sure it's not left on—I've had friends forget, and their battery died, ruining their whole day. The Corolla's light controls are super user-friendly, with no complicated buttons. It takes just seconds to handle, and driving with your lights on for safety gives extra peace of mind.

Was this review help?
18
5
Share
Expand All
VanFrank
11/22/25 6:09am

To turn off the Toyota Corolla's headlights, simply rotate the control stalk knob to the "Off" position, typically located on the left-hand stalk near the steering wheel. For Corollas equipped with automatic headlights, if the knob is set to "Auto," the lights will automatically turn off when the engine is shut off; in manual mode, they must be switched off manually. Occasionally, lights staying on may result from sensor misjudgment or incorrect settings—just adjust the knob slightly to resolve this. The Corolla's lighting system integrates light detection, generally requiring no additional steps, thus protecting the battery and preventing nighttime driving hazards.

Was this review help?
11
5
Share
Expand All
More Forum Discussions

How often should the spark plugs of the Verna be replaced?

The spark plugs of the Verna should be replaced every 40,000 kilometers. Whether replacement is needed requires removing them for inspection, observing their color and the gap between the electrodes, and checking if there is any air leakage between the ceramic and metal shell. The Verna is a model jointly designed and developed by Beijing Hyundai, Hyundai North America, and the European Design Center. Its body dimensions are 4340mm in length, 1700mm in width, and 1460mm in height, with a wheelbase of 2570mm. In terms of power, the Verna offers two engine configurations: 1.4L and 1.6L, both from Hyundai's new Gamma engine series. The 1.4L engine delivers a maximum power of 78 kW and a maximum torque of 135 Nm.
3
5
Share

What is the Difference Between a Waterlogged Car and a Flooded Car?

The difference between a waterlogged car and a flooded car lies in their nature: a waterlogged car refers to a vehicle that has been submerged in water due to low-lying terrain; a flooded car is one that has been completely immersed in water. Flooded cars are categorized into three types based on the severity of damage: 1. Water depth exceeds the wheels and enters the interior; 2. Water depth exceeds the dashboard; 3. Water level rises above the roof. Among these three categories, the first type is the most common and poses significantly less harm compared to the latter two. After repairs, it has minimal impact on daily use. A waterlogged car refers to a vehicle driving through low-lying or waterlogged roads, typically occurring during rainy weather when inadequate drainage leads to water accumulation in low-lying areas.
3
5
Share

How often should the Magotan B8 be serviced?

The Magotan B8 should be serviced every 5,000 to 6,000 kilometers. Car maintenance, also known as vehicle upkeep, refers to the regular inspection, cleaning, replenishment, lubrication, adjustment, or replacement of certain parts as a preventive measure. The purpose is to maintain the vehicle's appearance, ensure normal technical conditions, eliminate potential hazards, prevent faults, and extend its service life. In terms of interior design, the Magotan B8 features a redesigned interior with a smooth and elegant typical European style, adhering to ergonomic principles and high-efficiency design concepts to create a luxurious feel. The front suspension of the Magotan B8 is a MacPherson independent suspension, and the rear suspension is a multi-link independent suspension.
16
0
Share

What are the reasons for the ETC screen not lighting up?

etc screen not lighting up is due to: 1. Abnormal power supply to the display screen; 2. Poor contact of the wiring harness; 3. Damage to the display screen; 4. Abnormal video output signal from the motherboard. ETC is an electronic toll collection system, also known as an automatic road toll system, specifically designed for toll roads. It is commonly used on highways, bridges or tunnels with toll policies, and certain sections of urban roads to alleviate traffic congestion. The method to check ETC records is: 1. Open the search bar in a mobile device and enter the local ETC official account name; 2. Enter the official account, click to add more accounts, then click to bind the user account; 3. Fill in the user name and ID number information, then click to bind the ETC card account, entering the ETC card number and license plate number; 4. After successfully binding the account, return to the homepage and click on 'My Services' to query the monthly bill to check the records.
1
2
Share

How to reset the tire pressure warning on the Q5?

The method to reset the tire pressure warning on the Q5 is: 1. Calibrate the tire pressure for all four tires, then navigate to the vehicle settings menu on the central display and enter the system maintenance options; 2. Locate the tire pressure monitoring option and save the tire pressure. Taking the 2018 Q5 as an example, it is a mid-size SUV with body dimensions of: length 4629mm, width 1898mm, height 1655mm, wheelbase 2807mm, fuel tank capacity 75l, and curb weight 1900kg. The 2018 Q5 features a five-link independent front suspension and a trapezoidal link independent rear suspension. It is equipped with a 2.0L turbocharged engine, delivering a maximum horsepower of 230PS, maximum power of 169kW, maximum torque of 350Nm, paired with an 8-speed automatic transmission.
16
1
Share

What to Do When the Mazda 3 Steering Wheel Locks?

The solution for a locked steering wheel in the Mazda 3 is: 1. After starting the vehicle, do not press the brake pedal; 2. Turn the steering wheel left and right, then press the brake pedal, and finally press the one-button start button to resolve the issue. The Mazda 3 is a car produced by Changan Mazda Automobile, with body dimensions of 4582mm in length, 1795mm in width, and 1458mm in height. In terms of power, the Mazda 3 is equipped with two Skyactiv-G naturally aspirated engines, a 1.5L and a 2.0L. For the suspension, the Mazda 3 features a MacPherson strut independent front suspension and a multi-link independent rear suspension.
3
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.