How to Turn Off the Headlights of a Focus?

1 Answers
WalterDella
07/25/25 6:13am
The headlight switch of the Focus is located below the left air vent on the steering wheel. It is a rotary switch; turning it to the O position will turn off the headlights. The steps for removing and installing the headlights are as follows: 1. Open the front hood of the car, locate the car bulb, and take a photo to record the installation of the headlight. 2. Then firmly pull out the bulb power cord with the blue coil. Inside the blue circle is the lamp base, which can be directly pulled out with a little force. The metal handle inside the red circle is the handle to release the metal clip of the bulb. 3. At this point, you can see how the power cord is pulled out. Be sure to pull out the lamp base first, then release the metal clip handle of the bulb. 4. Press down in the direction of the blue arrow without letting go, then push to the right to loosen the car light clip. Once loosened, pull out the bulb directly. 5. Next, open the box of the newly purchased bulb and install the new bulb. 6. Finally, clip the bulb clip back in place, plug in the bulb power cord, and the installation is complete.
Was this review help?
6
5
Share
More Forum Discussions

What is the minimum ground clearance of the Excelle?

The minimum ground clearance of the Excelle is 138 millimeters. Minimum ground clearance refers to the distance between the lowest protruding part of the vehicle's chassis and the level ground when the car is fully loaded. It reflects the car's ability to pass over obstacles or uneven surfaces without collision. The Excelle is a compact sedan under the Buick brand, equipped with two engines: a 1.0-liter turbocharged engine and a 1.3-liter turbocharged engine, both of which are three-cylinder. The Excelle features a MacPherson independent front suspension and a multi-link independent rear suspension.
9
3
Share

What are the differences between the Excelle and Verano?

The differences between the Excelle and Verano: 1. Different body styles: The Excelle is only available as a sedan; the Verano offers both hatchback and sedan versions. 2. Different dimensions: The Excelle measures 4609mm in length, 1798mm in width, and 1464mm in height, with a wheelbase of 2640mm; the Verano sedan measures 4723mm in length, 1802mm in width, and 1466mm in height, with a wheelbase of 2700mm. 3. Different engines: The Excelle is equipped with a 1.5L naturally aspirated engine and a 1.3L turbocharged engine; the Verano comes with a 1.0L turbocharged engine and a 1.3L turbocharged engine. The Verano comes standard with Bosch's new ESP system (with 17 active safety features), TPMS intelligent tire pressure monitoring system, ISOFIX child seat anchors, rear parking sensors, and six airbags including side curtains.
7
5
Share

How to Adjust the Car's Diagonal Direction?

Here are the methods for adjusting the car's diagonal direction: 1. If you notice that the car body is not straight, you need to make slight adjustments to the steering to straighten it. Relax your hands and turn the steering wheel slowly, making small adjustments while keeping your eyes fixed on the straight line ahead. 2. You can use reference points to keep the car body aligned. Use the angle between the left A-pillar and the lower edge of the windshield to align with the left road line, keeping this point on the line. Here are methods to determine if the car body is straight: 1. Sit in the driver's seat with the correct posture. By selecting different moving and stationary reference points, you can accurately estimate the car's position on the road. You can repeatedly observe and measure from inside or outside the car. After starting the car, observe at different speeds and with different surrounding reference points to see if the observations are accurate. You can verify this by stopping and checking. 2. After selecting reference points, when driving in a straight line, to maintain the car's straight and level forward movement, you must learn to look far ahead and not just focus on the front of the car. The "three-point line" method involves looking far ahead, using peripheral vision to monitor the front of the car, the rearview mirrors, and the vehicles on either side.
18
4
Share

How to replace the brake light of Roewe RX3?

Here is the tutorial for replacing the brake light of Roewe RX3: 1. First, prepare a bulb of the original model and specification, open the engine compartment cover, locate the position of the brake light, and then open the dust cover. 2. Halogen lamps are generally fixed by wire clips. Remove both ends of the clip as indicated by the arrow and take it out. 3. Unplug the connector, then the bulb can be removed from the lamp. Install the new bulb, place it in, fix the bulb position with the clip, and then plug the connector back in. 4. After replacing the bulb, tighten the dust cover, and the replacement is complete. The bulb model for Roewe RX3 is HB3LL-60W. It is worth mentioning that the HB3LL bulb has the same shape and structure as the HB3 bulb, but its reliability and lifespan are longer than that of HB3.
8
0
Share

How to Fold the Rearview Mirror of the Volkswagen New Lavida?

The Volkswagen Lavida's rearview mirrors can be folded either automatically or manually. Here are the specific instructions for adjusting the rearview mirrors of the Volkswagen Lavida: 1. The control switch for the rearview mirror folding function is located on the inner side of the driver's door. Press the switch once to fold the mirrors automatically. Some models are not equipped with automatic folding and require manual folding by pushing the mirrors inward. 2. Fold or unfold the exterior rearview mirrors only when there are no people within the vehicle's operating range. For manual folding, simply apply slight force to push the mirror inward. 3. Do not manually fold or unfold electrically folding exterior rearview mirrors by mechanical means, as this may damage the electric drive mechanism. 4. Rearview mirrors with folding functionality can be retracted when passing through narrow sections, improving the vehicle's maneuverability. When the driver leaves the vehicle, folding the mirrors not only protects the mirror surface but also reduces parking space, effectively avoiding scratches.
14
5
Share

What is the positioning of the Sagitar?

The Sagitar is positioned as a compact family sedan. Below is a detailed introduction to the Sagitar: 1. The new Sagitar is equipped with two engines: a 1.2-liter turbocharged engine and a 1.4-liter turbocharged engine. 2. The 1.2-liter turbocharged engine delivers 116 horsepower and a maximum torque of 175 Nm. It features direct fuel injection technology and uses an aluminum alloy cylinder head and block. This engine is paired with either a 5-speed manual transmission or a 7-speed dual-clutch transmission. 3. The 1.4-liter turbocharged engine produces 150 horsepower and a maximum torque of 250 Nm. It also features direct fuel injection technology and uses an aluminum alloy cylinder head and block. This engine is paired with a 7-speed dual-clutch transmission. 4. The dual-clutch transmission offers fast gear shifts and high transmission efficiency, making it ideal for use with small-displacement turbocharged engines. The new Sagitar features a MacPherson independent front suspension and a multi-link independent rear suspension. The multi-link suspension enhances wheel traction and improves the vehicle's handling performance.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.