···
Log in / Register

How to Turn Off the Headlights of a Buick Envision?

4 Answers
HadleyDella
07/29/25 7:34pm
To turn off the headlights of a Buick Envision, locate the rotary knob below the air vent on the center console near the door. AUTO is for automatic headlights, and the left position turns them off. Precautions for using car lights include: 1. Turn on low beams when driving at night; 2. Do not use high beams when a following vehicle is driving close to the vehicle in front in the same direction; 3. When passing sharp curves, slopes, arch bridges, crosswalks, or intersections without traffic lights at night, alternate between high and low beams. Taking the Envision 2021 532T two-wheel-drive leading model as an example, it is equipped with a 1.5T turbocharged engine, with a maximum power of 124 kW and a maximum torque of 250 N·m, matched with a 7-speed dual-clutch transmission.
Was this review help?
9
5
Share
XavierDella
08/14/25 2:36pm
As a seasoned driver who has been driving the Buick Envision for several years, I find turning off the headlights quite straightforward and easy to operate. The light controls for the Buick Envision are located on the lever to the left of the steering wheel. Simply manually rotate the knob or press the switch to the 'off' position to turn off the headlights. Some models come with automatic lighting features, so you need to ensure the knob is set to manual mode at the 'off' position; otherwise, the headlights might stay on automatically based on ambient light. If the daytime running lights are on, they remain lit during the day but don’t interfere with manually turning off the headlights. After operation, take a quick glance at the dashboard indicators to confirm the lights are off, ensuring safety. Avoid turning off the lights while driving—it’s best to do it when parked. Also, be mindful not to accidentally touch the switch in daily use to prevent excessive battery drain.
Was this review help?
4
4
Share
Expand All
SanElijah
10/15/25 5:58am
From the design of the Buick Envision, turning off the lights is accomplished via the control lever on the left side of the dashboard. Manually rotate the knob to the 'off' position to shut off the main headlights; vehicles with automatic lighting functions can also be manually switched on and off directly. Remember to check if the lights are truly off by relying on dashboard indicators or observing the brightness of the headlights. Daytime running lights may remain on, but this does not indicate a fault in turning off the lights. If issues persist frequently, check the settings or seek professional diagnostics.
Was this review help?
13
2
Share
Expand All
LoganLynn
11/28/25 6:49am
Turning off the lights in the Buick Envision requires finding the right spot: just twist the left control stalk to 'OFF' to shut them down. Safety first—avoid distractions by adjusting lights only when parked, not while driving. Automatic lights can also be turned off manually. Simple and reliable.
Was this review help?
5
0
Share
Expand All
More Forum Discussions

Are H11 and 9005 bulbs the same?

H11 bulbs and 9005 bulbs are not the same. H11 xenon bulbs are generally used in fog lights, and some models now use H11 for low beams; 9005, also known as HB3 bulbs, are mainly used for high beam lighting in car headlights. The following are the differences between bulb models and low beams vs. high beams: Bulb models: Bulb models include H1, H3, H7, H4, H11, 9005, 9006, H8, H9, H10. There are also some less common models, such as H13, 9004, 9007, etc. H13, 9004, and 9007 are single bulbs, while H9 has two filaments. H4 comes in two types: single xenon and H4 retractable bulbs. Differences between low beams and high beams: The intensity of light differs. Low beams are focused outside the focal point, emitting scattered light that illuminates a large area at close range. High beams are focused at the focal point, emitting parallel light with high brightness, capable of illuminating distant and high objects. The illumination distance varies. Low beams are designed for short-distance lighting with a limited range and non-adjustable focus. High beams are intended for long-distance lighting, offering a greater range and higher brightness. Usage scenarios differ. Low beams are used when driving on urban roads, where lighting conditions are generally good. Using high beams in such areas can easily dazzle oncoming vehicles and cause accidents. High beams are suitable for use on highways or in rural areas without streetlights to expand the field of vision.
12
1
Share

How to adjust the time on a Chery QQ3?

Chery 3 time adjustment method is: 1. Start the vehicle; 2. Press and hold the time adjustment button on the right side of the dashboard, the hour digits will start blinking; 3. Briefly press the time adjustment button to adjust the hour digits; 4. After accurately setting the hour, release the time adjustment button, and the minute digits will start blinking after a few seconds; 5. Briefly press the time adjustment button to adjust the minutes. Taking the 2012 Chery QQ3 as an example, its body dimensions are: length 3550mm, width 1495mm, height 1485mm, wheelbase 2430mm, minimum ground clearance 152mm, and body weight 890kg.
5
2
Share

How Long Can a New Car's Temporary License Plate Be Used?

New car temporary license plates cannot exceed 30 days. Newly purchased motor vehicles must display temporary license plates to legally drive on the road, and the use of temporary plates for new cars must not exceed 30 days. The owner should promptly apply for official license plates from the vehicle management authority. After expiration, penalties may include vehicle impoundment, fines, and a 12-point deduction. Below are the types of temporary license plates and the conditions for applying for them: Types of temporary license plates: Administrative district temporary license plates, cross-administrative district temporary license plates, test-use temporary license plates, special-type motor vehicle temporary license plates. Conditions for applying for temporary license plates: When driving the vehicle from the place of purchase to the place of use, temporary plates must be applied for at the local vehicle management office where the vehicle was purchased; when transferring vehicle registration and after surrendering official plates, temporary plates must be applied for at the local vehicle management office to drive back to the original location; for new cars in the local area that have not obtained official plates and need to be driven to another location for modifications, temporary plates must be applied for locally, and after modifications are completed, temporary plates must be applied for at the modification location to drive back to the original area; when purchasing a car locally and needing to drive it to another location, temporary plates must be applied for locally to drive to the other location; for vehicles that have not yet been registered and need temporary use. If any of the above conditions are met, temporary license plates can be applied for at the local vehicle management office.
2
4
Share

What does automatic two-wheel drive mean?

Automatic two-wheel drive means that the car is driven by two wheels. In contrast, there is "four-wheel drive" (as the name suggests, all four wheels of the car can receive driving force). Simply put, a two-wheel drive car refers to a vehicle where the rear wheels (or front wheels) are the driving wheels, and the front wheels (or rear wheels) are the driven wheels, with the driving and driven wheels fixed and unchanging. A four-wheel drive car can have either the rear wheels or the front wheels as the driving wheels, but not both simultaneously. There are two types of two-wheel drive cars: front-wheel drive and rear-wheel drive. Below are the two scenarios for two-wheel drive cars: Front-wheel drive: In front-wheel drive cars, the front wheels are the driving wheels. The advantages of front-wheel drive cars with the same displacement include higher effective kinetic energy output, lower fuel consumption, stronger power, smaller size, larger interior space, lighter overall weight, compact structure, lower failure rate, and higher driving speed. Front-wheel drive cars are generally used in high-priced, spacious sedans. Rear-wheel drive: Rear-wheel drive cars have the rear wheels as the driving wheels. The advantages of rear-wheel drive cars with the same displacement include better load-bearing capacity, simple structure, easy maintenance, and good handling performance. Therefore, rear-wheel drive cars are generally used in large-sized, high-capacity medium and large freight and passenger vehicles.
2
5
Share

What does it mean when the oil can light flashes?

The reasons for the flashing oil can light are: 1. Excessive oil consumption, burning oil; 2. Assembly process issues, oil pan leakage, poor valve chamber sealing, oil entering the cylinder and being burned; 3. Damaged oil-gas separator, incomplete oil separation by the exhaust valve, causing oil to enter the cylinder and burn; 4. Significant oil pump wear, oil passage blockage. The flashing oil can light comes in two colors: yellow and red. Yellow indicates that the oil is starting to run low, but the vehicle can still be driven normally. Red indicates severe oil shortage or blockage, requiring immediate stopping of the vehicle and calling for rescue to tow the car.
8
3
Share

Can I directly apply for a B2 driver's license now?

Now you can directly apply for a B2 driver's license. Article 14 of the "Regulations on the Application and Use of Motor Vehicle Driving Licenses" states: For first-time applicants of a motor vehicle driving license, you can apply for driving license categories including urban buses, large trucks, small cars, small automatic transmission cars, low-speed trucks, three-wheeled vehicles, small automatic transmission passenger vehicles for the disabled, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, light motorcycles, wheeled self-propelled machinery, trolleybuses, and trams. Here are some additional details: 1. Age requirements for applying for a driving license: Applicants for small cars, small automatic transmission cars, small automatic transmission passenger vehicles for the disabled, and light motorcycles must be between 18 and 70 years old; applicants for urban buses, large trucks, trolleybuses, or trams must be between 20 and 50 years old; applicants for tractor-trailer licenses must be between 24 and 50 years old; full-time driving vocational education students applying for large passenger vehicles or tractor-trailer licenses must be between 20 and 50 years old. 2. Annual review of B2 driving licenses: Due to different types of vehicles driven, the annual review period for driving licenses may vary. Since 2013, holders of A and B class licenses must undergo an annual review once a year instead of every two years. If there are no demerit points on the license, the review can be exempted. According to current regulations, A and B class license holders must submit a physical condition certificate every two years and participate in an annual review once a year.
2
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.