···
Log in / Register

How to Turn Off the Golf Maintenance Reminder?

3 Answers
McPeter
07/30/25 2:16am
Golf maintenance reminder deactivation steps are: 1. Turn off the ignition switch to shut down the vehicle; 2. Use your left index finger to press and hold the reset button below the instrument panel, which looks like two zeros with a dot in between; 3. Then use your right hand to turn on the ignition switch, keeping the left hand pressing the reset button until the English words for maintenance service appear on the instrument panel, then release the button; 4. After releasing, press the reset button below the instrument panel again within 30 seconds; 5. After completing the above steps, the maintenance reminder light will be cleared; 6. If the maintenance reminder still appears after turning on the ignition switch, repeat the previous steps. The Volkswagen Golf is a classic hatchback compact family car introduced by FAW-Volkswagen. It is one of the most produced models by Volkswagen and also one of the brand's best-selling vehicles.
Was this review help?
11
4
Share
Viola
08/15/25 8:20am
Ah, speaking of turning off the Golf's maintenance reminder, as an experienced owner, I've got some tips. Usually, a maintenance light pops up on the dashboard, indicating it's time for service. If you want to turn it off, here's what you need to do: First, make sure the car is turned off and parked; Second, locate the mileage reset button below the steering wheel and hold it down; Third, turn the ignition key to the ON position without starting the engine—the screen might flash a prompt; Fourth, continue holding the button for a few more seconds until you hear a beep or the maintenance light goes off, then release the button. Once done, the reminder will be turned off. But I must remind you, don't just focus on turning off the light and forget the actual maintenance. Change the oil and filter on time, or it could seriously damage the engine. A car is like a person—regular maintenance keeps it running smoothly and safely. I've been driving my Golf for over a decade and stick to servicing every 5,000 kilometers—it saves both hassle and money in the long run.
Was this review help?
11
3
Share
Expand All
LeBradley
10/21/25 5:16am
I've been into cars for years and am quite familiar with the electronic systems in Golfs. Turning off the maintenance reminder is actually simple: first, turn off the engine without moving; then press and hold the small reset button next to the dashboard; next, turn the key to the ACC position (that is, turn it to power on but not start the engine); hold for a few seconds, and release when the indicator light goes off. The whole process takes just a minute, but the key is to stay focused when doing it—don't get distracted by your phone or anything else. Also, after turning off the maintenance reminder, remember to check your maintenance records later to confirm if the oil change was done on time. If the reminder keeps popping up, it might be a sensor false alarm, and you should get it tested at a shop. Car smart systems are convenient, but don't rely on them too much—knowing some basic maintenance is practical. Make it a habit to check the owner's manual regularly.
Was this review help?
5
3
Share
Expand All
More Forum Discussions

How Many Times Can a Clutch Be Burned Out?

Clutch plates need to be replaced once they are burned out. If the clutch is kept in a semi-engaged state for an extended period with high engine RPM, it will cause more wear and tear, accompanied by issues such as shaking, slipping, and unusual noises, necessitating replacement. Reasons for clutch plate burn-out: prolonged usage or excessive mileage; natural aging of the clutch plate, substandard material quality; overheating due to high working temperatures; wear caused by insufficient lubrication; too small free travel or excessive load cycles. Symptoms of a burned-out clutch: Reduced power: The engine's power output is transmitted to the transmission via the clutch. When the clutch is burned out, the clutch plates slip, naturally leading to reduced power. Metal grinding noise: The friction surface of the clutch plate is secured with rivets. Burning the clutch will wear out the friction surface, causing the rivets to come into contact with the flywheel, resulting in a metal grinding noise when engaging or disengaging the clutch. Changed clutch pedal travel: Burning the clutch thins or eliminates the friction surface, altering the clutch pedal's travel. Gear shift jerking: The clutch plate contacts the flywheel. When the clutch is burned out and rivets are exposed, it leads to a strong jerking sensation during gear shifts.
4
2
Share

What Are the Causes of Incomplete Clutch Disengagement?

Clutch disengagement issues: Excessive free travel of the clutch pedal, bent or deformed release levers, oil leakage in the clutch hydraulic control mechanism. Excessive free travel of the clutch pedal: When the free travel is too large, the movement of the release bearing pushing the release lever forward is reduced, consequently shortening the rearward movement of the pressure plate, leading to incomplete clutch disengagement. Solution: Inspect the free travel of the clutch pedal and adjust it if excessive. Bent or deformed release levers: Bent or deformed release levers, loose supports, worn-through pivot pin holes, dislodged pivot pins, or uneven contact surfaces between the release levers and the release bearing. Solution: Immediately seek professional repair services to inspect and replace the release levers as needed. Oil leakage in the clutch hydraulic control mechanism: Leakage, air presence, or insufficient oil in the hydraulic control mechanism. Symptoms include difficulty in shifting gears even when the clutch pedal is fully depressed, or the vehicle moving forward without releasing the pedal, causing the engine to stall. This indicates incomplete clutch disengagement. Solution: For hydraulic control mechanisms, check if the fluid reservoir has insufficient oil or if there is air in the lines, and perform necessary purging.
1
0
Share

Do I Need to Press the Brake When Shifting Gears During Reverse Parking?

It is best to keep the brake pressed at all times. If you can ensure that the test vehicle does not roll in the garage, you may not need to press the brake. When shifting gears, the vehicle is required to be in a stopped state. If the vehicle rolls, it may be judged as a failure. Below are specific tips for reverse parking: 1. Identify the starting point: Take right reverse parking as an example. The distance between the car and the left line at the starting position should be 1.2-1.8 meters, the steering wheel should be straight, and the body should be parallel to the left line. When reversing, use the bottom edge of the left rearview mirror as a reference. When the two coincide, turn the steering wheel fully to the right and continue reversing. 2. Control the corner point: Look at the right rearview mirror. When you spot the garage corner point, pay attention to the changing distance between the corner point and the car body. When the distance is less than 30 cm, turn the steering wheel back halfway and continue reversing. Once the car body enters the garage and is parallel to the garage line, turn the steering wheel back one full turn. If the distance is not less than 30 cm, do not turn the steering wheel back. Keep reversing until the car body is parallel to the garage line, then turn the steering wheel back one and a half turns at once. 3. Align the stopping point: The stopping point is the parking spot after entering the garage. The reference method is the same as for the starting point. When you see the bottom edge of the left mirror coincide with the garage's shoulder line, stop the car.
4
2
Share

Where is the rearview mirror heating switch on the 10th-generation Civic?

Three curved upward arrows paired with a rectangle represent the rearview mirror heating button icon. 1. Vehicle model restrictions: Although rearview mirror heating is practical, it is restricted on some models. For example, the rearview mirror heating function only operates when the ambient temperature is below 15 degrees Celsius. 2. Power consumption: Note that rearview mirror heating consumes a significant amount of power. Therefore, when using the rearview mirror heating function, ensure the vehicle is in the running state and avoid using this function when the engine is cold. If the battery is low on charge or malfunctioning, the rearview mirror heating may not activate.
18
4
Share

What Level of Officials Are Eligible for the Hongqi L5?

Hongqi L5 is primarily designated for officials at the level of the President of the country, serving as a dedicated vehicle for receiving foreign guests. Below is a detailed introduction about the Hongqi L5: 1. Overview: The Hongqi L5 is a Class E sedan with 100% independent intellectual property rights, developed and prepared for production by FAW (China First Automobile Works) after the success of the Hongqi-branded parade vehicle project in 2009. 2. Other Features: The design of the Hongqi L5 continues the classic styling of the Hongqi CA770, incorporating many traditional elements. The front face of the Hongqi L5 is inspired by the CA7600J parade vehicle from the 2009 National Day celebration, featuring a dignified and elegant appearance. The round headlights and the streamlined front-mounted Hongqi emblem are iconic design elements of the Hongqi brand.
18
3
Share

What Happens When Rear Wheels Lock Up?

When the rear wheels lock up during braking, it may cause the vehicle to skid or fishtail, while front wheel lock-up can result in a loss of steering control. During driving, wheel lock-up may occur due to braking, where the braking torque causes the wheels to stop rotating and slide on the road surface—essentially, the tires stop turning, and the car slides like a brick on the road. Wheel lock-up results in pure sliding friction between the tires and the road. Front wheel lock-up leads to steering failure, preventing the vehicle from moving in the intended direction and instead causing it to drift toward the path of least resistance. Rear wheel lock-up, on the other hand, can induce what is commonly known as drifting. Since locked wheels lose the ability to resist lateral forces, the vehicle may experience skidding or loss of control. When wheels lock up, the driver should release the brake pedal. Vehicles equipped with an ABS (Anti-lock Braking System) can effectively prevent this situation. Tire lock-up refers to the sudden and complete stopping of the wheels when braking, causing the vehicle to lose steering capability. This typically occurs in vehicles without ABS. Wheel lock-up happens due to excessive braking force from the brake pads, discs, or drums. However, because of the vehicle's momentum, it continues moving forward with the tires sliding rather than rolling, making it impossible to change direction and potentially leading to accidents.
19
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.