···
Log in / Register

How to Turn Off the Engine with Keyless Start?

3 Answers
OClara
07/28/25 9:47pm
Here are the steps to turn off the engine after keyless start: Step 1: Press the brake pedal and bring the vehicle to a complete stop; Step 2: Shift the gear from D (Drive) to N (Neutral); Step 3: Engage the parking brake (pull up the electronic parking brake if equipped); Step 4: Release the foot brake but do not turn off the power (this is to confirm the vehicle is completely stationary under the parking brake's effect and prevent P-gear lock); Step 5: Continue pressing the foot brake and shift the gear from N to P (Park); Step 6: Release the foot brake, press the engine start/stop button to turn off the power and complete engine shutdown.
Was this review help?
15
3
Share
ElleMarie
08/12/25 1:19am
Most keyless start cars make shutting off incredibly simple. After driving this car for years, I'm accustomed to coming to a complete stop, shifting into Park, lightly tapping the brake pedal, then pressing the one-touch start/stop button on the center console - the engine powers down smoothly in one seamless motion. The critical step is ensuring the transmission is in Park position; otherwise the button won't engage or the engine won't shut off - this safety feature prevents accidental rolling. Post-shutdown, I always double-check all systems (like lights and AC) are powered off to avoid battery drain. If the button becomes unresponsive, it's likely due to a depleted key fob battery or signal interference - try replacing the fob battery. Always engage the parking brake before shutdown for ground security.
Was this review help?
20
3
Share
Expand All
EdenLynn
10/01/25 2:53am
As a car enthusiast who frequently tinkers with vehicles, I'm quite intrigued by the one-button start/stop mechanism: You must park the car on level ground, shift to P (Park) mode, then press the ignition switch while depressing the brake pedal, and the engine will shut off instantly. The underlying principle is ingenious – it utilizes electromagnetic induction to prevent accidental operations. If you press the button while in Drive mode, the system will lock out as a safety precaution. If the engine fails to stop, check whether the key is within the vehicle's detection range or inspect the battery condition – aging batteries in older cars can cause issues. It's advisable to perform regular battery maintenance to prolong the lifespan of the one-button start system. Exercise extra caution when parking on slopes; shifting to P mode, engaging the parking brake, and then turning off the engine is the more reliable approach.
Was this review help?
8
2
Share
Expand All
More Forum Discussions

What transmission does the Peugeot 408 use?

Peugeot 408 uses Aisin brand transmission from Japan. Here is the related introduction of Peugeot 408 transmission: 1. Peugeot 408 has improved the transmission. The manual transmission adjusts the gear ratio while making the shifting action clearer and more engaging. The operating mechanism adds counterweights to make the shifting feel smoother, balancing fuel economy and driving pleasure. 2. The 4AT transmission has been upgraded with a more efficient torque converter, upgraded hydraulic system, and recalibrated shift control software. It has both automatic and manual modes (automatic mode is divided into economy, power, and snow modes, switchable via buttons). It incorporates uphill/downhill logic modes, divided into steep slope mode and gentle slope mode for gear control, enhancing safety.
5
2
Share

What colors are available for the Audi RS4?

Audi RS4 body colors include Nardo Gray, Navarra Blue, Mythos Black, Misano Red, Sonoma Green, Daytona Gray, Glacier White, and Floret Silver. Additional information about the Audi RS4: 1. The Audi RS4 is a mid-size car from Audi, with the new RS4 being an estate model. 2. The Audi RS4 is equipped with a powerful engine - a 2.9-liter twin-turbocharged V6 producing 450 horsepower and 600 Nm of torque. 3. The Audi RS4 features a five-link independent suspension at both front and rear. 4. This vehicle comes with a permanent all-wheel-drive system and uses a Torsen differential to enhance mechanical traction.
10
3
Share

What does AC mean in the air conditioning?

AC in the air conditioning refers to the air conditioning switch. Here is some information about AC: 1. Car air conditioning is divided into cold air conditioning and hot air conditioning. Hot air conditioning actually does not require turning on the air conditioning; you only need to turn on the blower to utilize the engine's heat for warming. On the other hand, cold air conditioning requires turning on the AC switch to activate the air conditioning compressor for cooling and producing cold air. Therefore, the AC switch is the start switch for cold air conditioning. 2. Mid-to-high-end car models often have an additional AUTO button, which stands for automatic air conditioning. When the AUTO button is turned on, the vehicle's computer automatically detects whether warm or cold air is needed through temperature sensors. For lazy people or beginners, automatic air conditioning can save a lot of setup trouble, making it convenient and quick to use.
14
5
Share

How to Use a Micrometer?

Here is how to use a micrometer: 1. Clean the surface of the workpiece to be measured and place it between the two anvils of the micrometer. Ensure the micrometer's spindle axis is perpendicular or parallel to the workpiece's centerline. Measuring at an angle will directly affect the accuracy of the measurement. 2. Rotate the thimble to bring the anvil close to the workpiece's measurement surface. Then switch to rotating the ratchet until it makes a "click" sound. The indicated value at this point is the measured size of the workpiece. 3. After measurement is complete, lower the thimble and remove the micrometer. 4. After use, clean the micrometer thoroughly, keep it dry, apply a thin layer of industrial vaseline, and store it in its case. 5. Avoid heavy pressure or bending the micrometer, and ensure the two anvils do not come into contact to prevent affecting the micrometer's precision.
10
2
Share

What is the ground clearance of the XRV?

XRV's ground clearance is 130mm when fully loaded, and can reach up to 142mm at maximum. Relevant information about the XRV is as follows: 1. In terms of appearance, the XRV measures 4328mm in length, 1772mm in width, and 1605mm in height, with a wheelbase of 2610mm. The XRV's exterior design follows the family-style design, exuding a strong sense of fashion and sportiness, incorporating many youthful design elements that align more with the aesthetic preferences of young people. 2. In terms of power, the XRV is equipped with two engines: a 1.5L and a 1.5T, paired with two types of transmissions: a 6-speed manual transmission and a CVT continuously variable transmission.
14
3
Share

Where is the fog light switch for the 2017 Mistra?

The fog light switch for the 2017 Mistra is located directly below the steering wheel. Rotate the middle wheel on the stalk: one turn activates the front fog lights, and two turns activate the rear fog lights. Here are specific details about the Mistra's fog lights: 1. The fog light assembly consists of a reflector, lens, bulb, shield, vertical light adjustment device, and housing. 2. The Mistra uses a combination switch, meaning all controls are on the stalk, which operates the car's low beams, high beams, front/rear fog lights, and marker lights. When the light switch is activated, an indicator will appear on the instrument panel. 3. The car's fog lights have strong penetration power and can be used in adverse weather conditions like fog, snow, or heavy rain to alert oncoming or following vehicles. Typically, front fog lights are yellow with downward illumination, while rear fog lights are red with parallel illumination. Front and rear fog lights are usually used together, and proper usage can effectively prevent accidents.
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.