How to Turn Off the ECO Display in Mercedes-Benz?

2 Answers
EllaMarie
07/25/25 11:02am
Methods to turn off the ECO display in Mercedes-Benz: 1. Press the "OK" button on the right side of the steering wheel to enter the menu, then use the left and right arrow keys to select the ECO mode. When the ECO icon appears on the display, it indicates that the ECO mode is set. 2. Use the up and down keys on the steering wheel to turn off the ECO mode. When the "OFF" icon appears on the display, it means the ECO mode is currently turned off. 3. Finally, press the "OK" button to confirm and exit the menu. Mercedes-Benz is a German luxury car brand with three sub-brands: Mercedes-Maybach, Smart, and AMG for high-performance models. The Mercedes-Maybach S-Class has body dimensions of 5466mm in length, 1899mm in width, and 1497mm in height, with a wheelbase of 3365mm.
Was this review help?
11
0
Share
Willie
08/11/25 7:54pm
I remember when I first drove a Mercedes, I was always annoyed by the ECO display on the dashboard. It constantly reminded me that I was in fuel-saving mode, making the drive feel a bit dull, especially when I wanted to step on the gas to accelerate. To turn off this display, the simple method is: after starting the car, use the buttons on the left side of the steering wheel to bring up the menu, find the driving mode option, and switch to Comfort or Sport mode. Once selected, the ECO indicator will disappear. Don’t worry about fuel consumption increasing slightly—turning it off makes driving more exciting, perfect for highways or roads where you prefer quicker responses. As someone who frequently commutes on highways, switching modes like this makes driving less stifling and allows for occasional speed indulgence.
Was this review help?
1
4
Share
Expand All
More Forum Discussions

How often should a Skoda Octavia be serviced?

Here is an introduction to the maintenance cycle of Skoda: 1. The maintenance cycle of the Skoda Octavia depends on the specific driving environment and the type of engine oil used. 2. If the driving environment is poor, such as areas with high wind and sand or rough rural roads, and if the engine oil is of a lower grade, such as mineral oil, it is recommended to service the vehicle every 5,000 kilometers. 3. If the driving environment is urban and the engine oil is high-grade fully synthetic, it is recommended to service the vehicle every 7,500 to 10,000 kilometers. Below are some extended details about Skoda maintenance: 1. The Skoda Octavia 1.6L model follows the same maintenance cycle as the other two models, the 2.0L and 1.8T, adhering to the Volkswagen convention. The first service at 7,500 kilometers is free, followed by an oil filter replacement every 7,500 kilometers. 2. The cabin air filter is generally replaced at 15,000 and 30,000 kilometers, but the replacement interval can be extended if the filter is found to be in good condition during inspection. The fuel filter is replaced at 22,500 kilometers.
7
3
Share

Where is the fog light on the Passat?

The fog light of the Passat is located at the light switch below the left side of the steering wheel. There are two gears in total, namely the front fog light and the rear fog light. Pulling one gear is the front fog light, and pulling two gears is both the front and rear fog lights. The following is an introduction to car fog lights: 1. Car fog lights are divided into front fog lights and rear fog lights. The light source has strong penetration and is usually used in situations where visibility is greatly affected by weather such as fog or rain, improving the ability of the driver and oncoming vehicles and pedestrians to detect each other from a distance, playing a role of safety warning. 2. The front fog light is bright yellow and is generally installed below the bumper and at the position closest to the ground on the body to ensure the function of the fog light. If installed too high, the light cannot penetrate the rain and fog to illuminate the ground, rendering it ineffective. 3. The rear fog light has a red light source, and the light lines of the rear fog light symbol are parallel. 4. In situations with low visibility such as fog, snow, rain, or dust, the front and rear fog lights are usually used together to ensure driving safety.
4
4
Share

Why does the hazard warning flasher blink when turned on?

It is normal for the hazard warning flasher to blink when turned on. Below are the situations when the hazard warning flasher should be activated: 1. When the vehicle breaks down: If the vehicle cannot be moved to a safe area promptly, the hazard warning flasher should be turned on immediately to alert passing vehicles and pedestrians for safety, and the authorities should be notified while waiting for assistance. 2. Breakdown on the highway: The vehicle should be parked in the emergency stopping lane, the hazard warning flasher should be turned on promptly, and a hazard warning sign should be placed 150 meters behind the vehicle before quickly notifying the authorities. 3. When towing a faulty vehicle: Since the vehicle is in an abnormal state, both the towing vehicle and the towed vehicle should activate the hazard warning flashers simultaneously to alert passing vehicles and pedestrians. 4. Sudden heavy rain while driving: The hazard warning flasher should be turned on immediately to alert passing vehicles and pedestrians for safety and draw attention. 5. Transporting critically ill patients: When rushing to transport critically ill patients, the headlights should be turned on immediately along with the hazard warning flasher, and the horn should be used appropriately, with a clearly visible special sign displayed outside the vehicle.
6
4
Share

How to Touch Up Paint on a Scratched Motorcycle?

If the scratch hasn't exposed the primer, simply gently buff the scratch with polishing compound and it will disappear. It takes at most 10 minutes. For very shallow scratches, you can use a touch-up paint pen available at automotive parts stores. For deep scratches, you need to first apply body filler, sand it smooth, then apply red putty, followed by primer spray.
6
4
Share

How to Remove a Car Door?

First, prepare the necessary tools for removal. Start by removing the two plastic pins. Use a tool to press the center point inward, then pry it out with scissors. Be sure to press the center point down. Next, use the prepared tools to loosen the remaining two screws and remove them. After all screws and pins have been removed, grip the door firmly and pull it towards you with force.
3
2
Share

What to Do When the Peugeot 308 Trunk Won't Open?

Double-click the unlock button on the key to release the trunk lock, then gently pull to open the trunk. Pressing the unlock button on the dashboard console can also unlock the trunk. Similarly, gently pull to open the trunk.
18
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.