How to turn off the default radio in Roewe RX5?

3 Answers
SanDamian
07/29/25 5:48pm
To turn off the default radio in the Roewe RX5, simply press the power button located at the lower left corner of the radio screen. The Roewe RX5 radio features three tuning modes: 1. Automatic tuning; 2. Manual tuning; 3. Preset tuning. The Roewe RX5 is a compact SUV under SAIC Motor, with body dimensions of 4556mm in length, 1855mm in width, and 1719mm in height. It adopts MacPherson strut front suspension and multi-link rear suspension, equipped with systems including panoramic imaging, power tailgate, panoramic sunroof, dual-zone automatic climate control, keyless entry, and one-touch start.
Was this review help?
2
5
Share
Leanne
08/14/25 9:27am
I've been driving this Roewe RX5 for quite a while, and turning off the default radio is actually quite easy. After the car engine starts, the radio often plays automatically, which can be quite noisy sometimes. The solution is to directly operate the volume control knob on the steering wheel: rotate it to turn the sound down to the minimum, or gently press the mute button on the steering wheel, and it will immediately go silent. If you want it to start quietly every time, you need to go into the settings menu on the central control screen. Open the "System" option, find "Audio Settings," and there's a switch for "Play Radio on Startup." Turn it off and save the settings. Next time you drive, you won't have to worry about the noise. I think this is quite convenient, especially when focusing on navigation while driving—less distraction means safer driving. Also, note that the settings location may vary slightly depending on the vehicle model. If you can't figure it out, refer to the user manual or ask the 4S store.
Was this review help?
18
5
Share
Expand All
AvaAnn
10/14/25 2:25am
When I first got my driver's license, I couldn't figure out why the Roewe RX5 always automatically turned on the radio. The steps to turn it off are simple: press the mute button on top of the volume knob right after getting in the car, and it will shut up instantly. Alternatively, just turn the volume knob to mute. If you want no sound at startup every time, you'll need to adjust the settings in the central control screen. Click the main menu, select "Vehicle," then go to "Audio Settings," and set the "Default Audio Source" to mute or disable the auto-start option. Save the settings and restart the car to test the effect. These settings are hidden in the system, so take your time exploring—don't worry about clicking the wrong thing. I think this is beginner-friendly, as it helps maintain a quiet driving environment without interfering with music or phone calls. I recommend getting familiar with the screen functions through regular use; you'll get the hang of it after a few tries.
Was this review help?
7
2
Share
Expand All
More Forum Discussions

How to Solve Scooter Starting Shaking and Jerking?

There are corresponding solutions for different causes of shaking during scooter starting. Below are the specific solutions: 1. The contact area between the friction plate and the working surface of the clutch housing is too small: Apply chalk to the surface of the friction plate of the clutch shoe, install the clutch, start the engine, and accelerate-brake to stop the rear wheel. Repeat this several times, then remove the clutch to check the working contact surface of the shoe friction plate. Use a grinding wheel to polish the surface of the clutch shoe friction plate, ensuring the contact area between the friction plate and the working surface of the clutch housing reaches more than 80% of the total area. 2. Excessive wear of the clutch friction plate: Use a file to trim the chamfers at both ends of the clutch friction plate to increase the chamfer that has been reduced due to wear. 3. Sticking of the clutch shoe on the pin: Clean and lubricate the installation pin of the clutch shoe (i.e., the transmission plate pin) and the pin hole on the clutch shoe to eliminate the sticking of the clutch shoe on the pin. 4. Damage to the small spring of the clutch shoe: Replace the three small tension springs of the clutch shoe to ensure equal tension in all three small springs, thereby eliminating the asynchronous engagement of the clutch friction plate and the clutch housing.
6
3
Share

What is the tire size of the Nissan Sylphy Classic?

The tire size of the Nissan Sylphy Classic is 195/60R16. The first number, 195, represents the tire width of 195MM. The 60 indicates the aspect ratio of the tire section is 60%, meaning the section height is 60% of the width. The 16 denotes the rim diameter of 16 inches, and the letter "R" in the middle stands for radial tire. The Nissan Sylphy Classic is equipped with Dunlop ENASAVE series economical tires, featuring a cyclone-style wheel design, and the spare tire is non-full size. If you want to replace the tires yourself, you can follow these steps: Take out the spare tire and jack, place the jack under the frame of the tire to be replaced, ensuring the jack touches the metal part of the frame; Raise the jack until it supports the car. The jack should be positioned under the vehicle, check and ensure the jack is at a right angle to the ground; Remove the hubcap, loosen the nuts counterclockwise. Do not completely loosen the nuts, just enough to eliminate resistance. When loosening the nuts for the first time, keeping the tire on the ground ensures the nuts turn instead of the tire; Turn the nuts counterclockwise until they come off. Repeat this step for all lug nuts, then completely remove the nuts; Place the new tire on the wheel hub, carefully align the tire rim with the wheel bolts, install the lug nuts, and tighten them by hand until all nuts are concealed. At this point, the tire replacement is complete. In addition to the model, the following common data is marked on the tire: Tire cord material: Represented by Chinese pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord tire. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under specified conditions. Letters A to Z represent the certified speed ratings of tires from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specification: Indicates the rim specification compatible with the tire for practical use, such as "Standard Rim 5.00F".
18
2
Share

What engine does the Jeep Compass have?

The Jeep Compass is equipped with two types of engines: a 1.4-liter engine model FIRE Multi-Air2 and a 1.3-liter engine model GSE-T4. The 1.3-liter turbocharged engine has a maximum power output of 127 kW and a maximum torque of 270 Nm, while the 1.4-liter turbocharged engine delivers a maximum power of 121 kW and a maximum torque of 250 Nm. The engine brand for the Jeep Compass is Škoda, a well-established European engine manufacturer. This particular engine is a classic model introduced by Škoda in 1989. For daily maintenance of the Jeep Compass engine, the following methods can be applied: Use lubricating oil of appropriate quality grade. For gasoline engines, select SD to SF grade gasoline engine oil based on the additional equipment of the intake and exhaust systems and usage conditions. For diesel engines, choose CB to CD grade diesel engine oil according to mechanical load, ensuring the standard meets or exceeds the manufacturer's requirements. Regularly change the engine oil and filter. The quality of any grade of lubricating oil will degrade over time. After a certain mileage, performance deteriorates, leading to various engine issues. To prevent malfunctions, change the oil periodically based on usage conditions and maintain an appropriate oil level. When oil passes through the fine pores of the filter, solid particles and viscous substances accumulate in the filter. If the filter becomes clogged and oil cannot pass through, the filter may rupture or the safety valve may open, allowing oil to bypass the filter and carry contaminants back to the lubrication areas, accelerating engine wear and increasing internal contamination. Periodically clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. Small amounts remain suspended in the oil, while larger quantities can separate, clogging filters and oil passages, making lubrication difficult and causing wear. Regularly use a radiator cleaner to flush the radiator. Removing rust and scale not only ensures proper engine operation but also extends the overall lifespan of the radiator and engine.
6
4
Share

What Causes High Engine Temperature in Motorcycles?

Introduction to the causes of high engine temperature in motorcycles: Insufficient or leaking coolant: When the engine is cold, open the radiator filler cap and check if the coolant level is adequate (for CH125 models, the front fairing must be removed). Coolant should be replenished at idle speed by filling the radiator to the brim, while the reservoir should only be filled to about two-thirds of its total capacity. Check if the engine oil has emulsified or deteriorated. If the oil appears milky white, it indicates internal coolant leakage, necessitating engine disassembly to identify and rectify the cause. Typically, internal leaks occur at the junction between the cylinder head and cylinder block, which can be resolved by replacing the cylinder head gasket. The ratio for coolant mixture varies depending on the region and the concentration of the original fluid. The following table uses Honda Super Coolant as an example: Additionally, carefully inspect all hose connections for leaks, check for hose damage, and examine the water pump leakage hole for any signs of coolant seepage. Blocked circulation system: Inspect the circulation system for any blockages. The radiator should be cleaned with a radiator cleaner every 5,000 km, with special attention paid to whether the small circulation hose is twisted or obstructed. If the small circulation is blocked, the coolant temperature in the cylinder block and head water jackets will continuously rise after engine startup but cannot circulate. The thermostat will not open if the water temperature at its location does not increase. When the water temperature in the jackets exceeds the boiling point, the increased molecular motion gradually raises the temperature at the thermostat, causing it to open. The high-temperature, high-pressure coolant then rushes out through the filler cap, resulting in a "boiling over" phenomenon. Valve clearance too small: To ensure engine performance, valve clearances are set to specific requirements and are not necessarily better when smaller. For instance, the exhaust valve clearance for Honda CH125 is specified at 0.10 mm. However, due to dimensional discrepancies in domestic engine components or user intolerance to valve noise, many manufacturers (or users) adjust the valve clearance to very small values during production, leading to incomplete valve closure. This can prolong the post-combustion period of the air-fuel mixture, with much of the heat generated during this phase contributing to temperature rise rather than useful work, thus causing engine overheating. In reality, as long as the valve clearance is adjusted according to specifications, slight valve noise does not affect usability. Excessively lean air-fuel mixture: Typically, the carburetor's air-fuel mixture ratio is pre-adjusted by professionals using specialized equipment before leaving the factory, and riders need not adjust it. Only if overheating is confirmed to be caused by an excessively lean mixture should the carburetor adjustment screw be appropriately tuned. Faulty thermostat: The thermostat's role is to reduce coolant circulation when the engine is cold, allowing it to reach optimal operating temperature quickly. A genuine wax-type thermostat should begin to open at around 70 degrees Celsius and fully open at approximately 80 degrees Celsius. If the thermostat fails to open properly, it will inevitably lead to poor circulation and engine overheating.
5
2
Share

What is Volkswagen?

Here is an introduction to Volkswagen: 1. The Volkswagen Phaeton is a luxury sedan produced by Volkswagen AG in Germany. 2. With maximum engine outputs of 177 kW (241 hp), 246 kW (335 hp), and 309 kW (420 hp), the Phaeton showcases Volkswagen's exceptional comfort, power, and technological potential. 3. The top-tier engine models come standard with 4motion four-wheel drive technology, with its advantages primarily reflected in traction and road stability. Depending on the degree of slippage, the power distribution of the four-wheel drive can be fully variably adjusted across all four wheels.
15
2
Share

How to Study for Large Vehicle License Deduction Points on Mobile App 12123?

Large vehicle license deduction points cannot be studied on mobile app 12123. Here are the specific study requirements: 1. You need to go to the vehicle management office or the traffic management department of the public security authority to study. 2. The study period is seven days. After completing the study, you must take the subject one test for the motor vehicle driving license. 3. Upon passing, the driving license will be returned. 4. When handling point deduction for a motor vehicle driving license, you need to bring your own driving license, ID card, and the vehicle registration certificate of the offending vehicle to the local traffic management department to process the traffic violation.
20
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.