···
Log in / Register

How to Turn Off the Daytime Running Lights on the Haval Big Dog?

5Answers
MacSara
09/05/2025, 03:05:43 AM

You can turn them off by activating the vehicle's position lights, license plate lights, or headlights. Generally, when the left or right turn signal is activated on this vehicle, it will also trigger the daytime running light on the same side to turn off.

Was this review help?
112
Share
LilaRose
09/17/2025, 03:24:36 AM

As a car enthusiast, I find the default daytime running lights on the Haval Big Dog quite bright, and sometimes I want to turn them off to reduce eye strain. If you remember the procedure, sit in the car, start the engine but don't turn on the headlights. Then look at the central touchscreen, go to the 'Settings' menu, and find the 'Vehicle' or 'Lighting' option. If there's a 'Daytime Running Lights' toggle, just tap it to turn them off—newer Haval models usually have this feature. If you can't find the option, it might be designed not to allow turning them off, or you may need to visit a 4S dealership to adjust it with diagnostic tools; tampering with the fuse box yourself is risky, as a short circuit could cause trouble. Keeping them on is actually safer, as they alert pedestrians and other drivers during the day—it's not worth the risk of an accident if you turn them off. The most reliable way is to ask a technician during routine maintenance.

Was this review help?
17
Share
Expand All
DeChristopher
10/31/2025, 03:53:33 AM

I've been driving the Haval Big Dog for a while, and the daytime running lights kept staying on. At first, I found it annoying, but later I learned how to turn them off. Here's a simple method: After ignition, without turning on any lights, use the control buttons on the steering wheel or enter the system settings on the central control screen. Look for the DRL option in the lighting section to turn it off. Most Haval models can be adjusted this way. If not, refer to the user manual or contact customer service. I don't recommend modifying it yourself—although pulling the fuse can temporarily turn off the lights, it may trigger error codes and is against regulations, as the law requires them to be on for safety. I've gotten used to leaving them on; it makes me more visible to others and avoids fines. Just get used to it. No need to mess around unnecessarily.

Was this review help?
19
Share
Expand All
DeEli
12/14/2025, 03:01:57 AM

The method to turn off the daytime running lights (DRLs) on the Haval Big Dog involves electrical control. After starting the vehicle, navigate through the central infotainment system: select the main menu → vehicle settings → lighting options, and look for the DRL switch to disable it. If this function is unavailable, reprogramming via an OBD tool or handling by a 4S shop is required; checking the fuse location may interrupt the circuit, but improper operation could trigger an alarm. Be aware of local traffic regulations, as illegal deactivation may lead to penalties—it is recommended to retain the default setting for enhanced visibility.

Was this review help?
2
Share
Expand All
DeVivienne
02/03/2026, 09:09:26 PM

From a safety perspective, I don't recommend turning off the Haval Big Dog's daytime running lights. They're designed to automatically activate to alert other drivers and reduce accident rates; disabling them may save power but significantly increases risks and violates regulations. If you really want to turn them off, check the vehicle settings menu or consult the manual when the engine is off—but honestly, leaving them on is the most reassuring option: it makes you more visible to others while driving. DIY modifications like tampering with wiring could fry the system and increase repair costs. Personal advice: don't risk major consequences for minor gains, focusing on driving habits is sufficient.

Was this review help?
3
Share
Expand All
More Q&A

What are the methods for self-repairing when the airbag light is on?

Airbag light on self-repair methods are: 1. Instrument self-check: During the short period of ignition, the instrument will perform an automatic check. After the automatic check is completed, the airbag light will automatically go out. This time will be about 5 seconds, which is a normal phenomenon; 2. False fault: Battery power loss can cause the airbag light to come on. Simply charge the battery; 3. The airbag can feedback a signal of low airbag pressure, forming a fault code. At this time, it is necessary to eliminate this fault code; 4. True fault: If the above two reasons are excluded, it may be a line fault, and you should go to repair immediately.
101
Share

What Causes Lack of Power, Dullness, Slow Acceleration, and Jerking in a Car?

Here are the reasons for lack of power, dullness, slow acceleration, and jerking in a car: Engine fuel system blockage: Clogged fuel injectors, leaking fuel lines, reduced fuel pump performance, or a blocked fuel filter. Intake system issues: Components like the air filter or throttle valve being clogged or malfunctioning, leading to insufficient air intake. Poor spark plug ignition: Noticeable shaking when the car is idling, indicating at least one cylinder is not functioning properly or has stalled. Other factors: There can be many reasons for slow acceleration and lack of power in a car, but generally, the faults are concentrated in the engine's ignition, intake, and fuel systems. By systematically checking and eliminating each possibility, you can resolve issues like lack of power, dullness, slow acceleration, and increased fuel consumption.
108
Share

Should autohold be kept on all the time?

autohold is an automatic parking function, whether to keep it on all the time depends on the driver's needs for this function. During normal use, the advantage of autohold is that it can automatically activate the four-wheel braking system when the vehicle is stopped at a traffic light or on a slope. Even in D gear or N gear, there is no need to keep the foot on the brake or use the handbrake, as the car remains stationary. autohold provides accurate parking force through a slope sensor controlled by the controller. When starting the car, the parking control unit calculates information from the clutch distance sensor, clutch engagement speed sensor, and throttle pedal sensor. It automatically releases the parking brake when the driving force exceeds the driving resistance, allowing the car to start smoothly and significantly reducing the time wasted on judgment based on experience.
115
Share

What are the causes of brake light failure?

Brake light failure can be caused by: 1. Brake system failure due to severe oil shortage caused by worn brake fluid pipes; 2. Low oil level in the brake fluid reservoir leading to failure of the float-type sensor; 3. Severe wear of brake pads and breakage of pre-embedded wires; 4. Short circuit in the brake warning system and vapor generation in the brake fluid pipes. The brake system is a series of specialized devices that can forcibly reduce the speed of a vehicle. The brake system mainly consists of four parts: energy supply device, control device, transmission device, and brake. The main functions of the brake system are to decelerate or even stop a moving vehicle, maintain a stable speed for a vehicle going downhill, and keep a stationary vehicle from moving.
108
Share

What does autohold mean in a car? How to use it?

autohold refers to the automatic parking system. Press this button when braking, and it can also prevent the car from rolling back on slopes. The following are the functions of autohold and how the automatic parking system works: Functions of autohold: Autohold is essentially an automatic braking function. When autohold is activated, there is no need to pull the handbrake, which enhances driving safety. How the automatic parking system works: The brake management system controls the four-wheel brakes through the extended function of the electronic parking brake (EPB). In other words, the automatic parking system is an extended function of the electronic parking brake (EPB), controlled by the ESP component.
118
Share

How to Determine if the PCV Valve is Faulty?

Methods to determine if the PCV valve is faulty: Insert the oil dipstick into the hole below the PCV valve, ensuring it reaches the bottom, then pull it out to check if it is coated with oil. Generally, the presence of oil indicates a malfunction. The PCV valve, also known as the oil separator or pressure control valve, is typically installed between the compressor outlet and the condenser inlet. Its separation function helps improve heat transfer efficiency in the condenser and evaporator. If the PCV valve fails, it should be repaired immediately at a 4S shop or a professional and reliable repair facility. Ignoring the issue can lead to increased fuel consumption, wasted gasoline, and a decline in the vehicle's driving performance.
113
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.