How to Turn Off the Cruise Control Indicator Light?

What are the test contents for upgrading from C1 to B1 driver's license?

C1 driver's license holders who wish to upgrade to a B1 license need to take three test subjects, which are: Subject 1 (Road traffic safety laws, regulations, and related knowledge test); Subject 2 (Field driving skills test); Subject 3 (Road driving skills test and safe civilized driving common sense test). C1 driver's license: The C1 driver's license is one of the motor vehicle driver's license codes. The scope of vehicles allowed to be driven with a C1 license includes small and micro passenger vehicles, light and micro cargo vehicles; light, small, and micro special-purpose vehicles; and small passenger vehicles with a seating capacity of 9 or fewer people. Application age: The minimum age limit for a C1 driver's license is 18 years old, with no upper age limit. However, applicants aged 70 and above must pass tests on memory, judgment ability, and reaction ability.

3

4

Share

How to Use Lights When Entering a Ramp?

When entering a ramp, you should turn on the right turn signal in advance and make sure it is safe before driving into the ramp. Here is some additional information: 1. At night, visibility is reduced. In addition to turning on the right turn signal in advance, you should also turn on the position lights and alternate between high and low beams. 2. When driving on the road, using lights correctly can improve safety during the journey. 3. When driving on urban roads, do not turn on the high beams, as this will affect the vision of oncoming drivers and the drivers ahead. 4. When driving on rural roads or highways without streetlights, turn on the high beams. However, as a courtesy, turn them off when meeting another vehicle. 5. In a car's lighting system, brake lights and turn signals are actually more prone to malfunctions. It is recommended to regularly check the working condition of the brake lights and turn signals.

5

3

Share

How to Adjust the Mazda 3 Axela Seat?

Here are the methods for adjusting the Mazda 3 Axela seat: 1. Mazda 3 Axela Front Seat Adjustment (Power Seat): (1) Press the lumbar support button to adjust the angle of the lumbar support. (2) Move the switch forward or backward to control the seat's forward or backward movement. Lift or press down to adjust the seat height. (3) Move the backrest switch forward or backward to adjust the backrest angle. 2. Mazda 3 Axela Front Seat Adjustment (Manual Seat): (1) Pull the backrest switch and use your waist strength to adjust the backrest to the desired position, then release the switch. (2) Height adjustment switch: This switch controls the seat height—pull up to raise and press down to lower. (3) Front and rear position adjustment: The lever is located under the seat; pull it to adjust the seat position.

3

4

Share

Where to Add Urea for Vehicles?

Vehicle urea solution comes with a filling tube, which is used to fill the urea solution into the vehicle's urea tank. Additional information: 1. Vehicle urea solution: Vehicle urea is an essential product for heavy-duty diesel vehicles to meet the National IV emission standards. Vehicle urea refers to a urea aqueous solution with a urea concentration of 32.5% and a solvent of ultra-pure water, with raw materials being urea crystals and ultra-pure water. For heavy-duty trucks, buses, and other diesel vehicles to meet the National IV emission standards, an appropriate SCR system must be selected for exhaust treatment, and this system must use urea solution to treat nitrogen oxides in the exhaust. Therefore, vehicle urea solution has become an essential product for heavy-duty trucks and buses to meet the National IV emission standards. 2. Suggestions for choosing vehicle urea: (1) Comply with GB29518-2013. (2) Have the AdBlue certification issued by the German Automotive Industry Association. (3) Have the CGT certification issued by the China Internal Combustion Engine Industry Association.

1

5

Share

What is the method of using coating agent?

To use the coating agent, first wash the car body, then dry the water on the car, evenly apply the coating agent liquid on the car paint, then use a dry towel to evenly wipe the coating liquid on the car paint, apply the water-repellent promoter, and the car coating is completed. The following are the benefits of using the coating agent: 1. The painted surface after car coating has stronger oxidation resistance, wear resistance, corrosion resistance, and high temperature resistance, and the coating layer is more evenly distributed, finer, harder, and the brightness lasts longer. 2. The car paint becomes a continuous surface, and the overall paint surface density increases. At the same time, it also brings a good superposition performance, that is, after countless layers of superposition, there is no interface between the layers, and no peeling phenomenon occurs. After applying it on the car paint surface in a natural environment, the car paint is protected, making the car more beautiful.

3

4

Share

What is the normal temperature range for wheel hubs?

During normal vehicle operation, the temperature of wheel hubs typically ranges between 45 to 80 degrees Celsius. The inner ring of the wheel hub near the axle tends to be warmer, with temperatures between 60 to 80 degrees Celsius, while the outer ring, being farther from the axle heat source and benefiting from air cooling through ventilation holes, usually maintains temperatures between 30 to 50 degrees Celsius. Factors such as brake malfunctions, prolonged braking on slopes, or overloading can significantly increase wheel hub temperatures. Continuous temperatures exceeding 120 degrees Celsius indicate that the vehicle should no longer be driven. Below are some wheel hub maintenance tips: 1. Remove sand and dirt adhering to the wheel hub surface: Cleaning off sand and harmful contaminants from the wheel hub surface is essential to prevent corrosion and damage to the alloy. 2. Apply anti-acid cleaner to both inner and outer surfaces of the wheel hub: Treating the wheel hub with anti-acid cleaner and applying wax every two months can help extend its lifespan.

10

4

Share

How to Turn Off the Cruise Control Indicator Light?

What are the test contents for upgrading from C1 to B1 driver's license?

How to Use Lights When Entering a Ramp?

How to Adjust the Mazda 3 Axela Seat?

Where to Add Urea for Vehicles?

What is the method of using coating agent?

What is the normal temperature range for wheel hubs?

How to Drive the Binyue Fuel-Efficiently?

What Documents Should You Carry While Driving?

What is the Principle of Wheel Alignment?

Where is the Mazda 3 Air Filter Located?