How to Turn Off the Built-in Navigation Alerts in BMW?

How much does turning on the AC increase fuel consumption in an SUV?

Turning on the AC in an SUV increases fuel consumption by approximately 20%. The specific impact depends on the vehicle's displacement and speed. For instance, a car that normally consumes 10 liters per 100 kilometers will see an increase of about 2 liters when the AC is on. To check the remaining fuel in the tank, drivers can observe the fuel gauge on the right side of the dashboard, marked with E and F. When the needle is close to E, it indicates low fuel, while proximity to F means the tank is nearly full. Maintenance tips for the fuel tank include: Draining accumulated water and sediment from the tank, and inspecting fuel line connections and switches for any leaks. For fuel tank caps equipped with air and vapor valves, ensure the vent holes are clear. The filter screen at the fuel filler neck should remain intact to prevent contaminants from entering the tank and clogging the fuel lines during refueling. The sealing gasket on the fuel filler cap should also be in good condition to prevent fuel spillage while driving.

14

0

Share

What does it mean when the driver's license status is locked on the Traffic Management 12123 platform?

When the driver's license status is locked on the Traffic Management 12123 platform, it means that certain procedures such as license transfer cannot be processed temporarily. Below are the detailed explanations: 1. Content: Driver's license transfer refers to the procedure where a vehicle owner relocates their driver's license to a new residence due to reasons such as job transfer or moving, in order to avoid the hassle of annual license review. It can be categorized into two types: license transfer out and transfer in. 2. Requirements: The applicant must appear in person to handle the procedure and sign on the spot; it cannot be delegated to others. 3. Required materials: Proof of identity, which includes the original and a copy of the 'Resident Identity Card'; proof of household registration transfer, which is the 'Permanent Population Registration Form' or 'Household Registration Card'; for active military personnel (including armed police), the proof of identity includes the original and a copy of the 'Resident Identity Card' or the original and a copy of the military ID issued by the People's Liberation Army or the Armed Police Force, along with an original certificate issued by the military unit at or above the regiment level stating the ID number and residential address; an out-of-town motor vehicle driver's license; and a white-background standard digital photo.

6

3

Share

What is the gauge on the far left of the dashboard?

The gauge on the far left of the car dashboard is the water temperature gauge. While driving, the water temperature gauge should generally indicate the midline or slightly higher as normal. If you notice the water temperature is too high or too low, immediate maintenance is required. If the water temperature is too high, you must stop the vehicle immediately and not continue driving. If the water temperature is low, you can drive to a repair shop for inspection. Notes on the water temperature gauge: The dial is larger than the water temperature gauge and is used to measure the engine speed. Generally, the speed pointer is safe within the white scale range, while the red scale indicates a dangerous speed range. How the water temperature gauge works: The sensor of the water temperature gauge is a thermistor-type sensor, fixed with threads on the engine cooling water passage. The thermistor determines the current flowing through the coil winding of the water temperature gauge, thereby driving the pointer to swing. In the past, tap water was used as the cooling liquid for car engines, but now many car engine cooling systems use specialized coolant, so it is also called the coolant temperature gauge. Normal temperature range for car water temperature: The water temperature gauge ranges from 0 to 130 degrees, with the normal temperature being the central 90 degrees. When the water temperature stabilizes at 90 degrees, it indicates that the engine's heat generation has stabilized, reaching the optimal working condition.

19

3

Share

What Does Warranty Period Mean?

Automobile warranty period refers to the time period during which the car manufacturer promises to provide free repairs and maintenance for faults caused by quality issues when selling the product to consumers. Related Warranty: Most car manufacturers implement a new vehicle warranty period of "two years or 60,000 kilometers, whichever comes first." This means there are two conditions for the warranty period: one is a time limit of 2 years, and the other is a mileage limit of 60,000 kilometers. Once either of these two conditions is met, it indicates that the vehicle's warranty period has expired, and normal maintenance and repairs will no longer be free. Daily Maintenance: Before driving, it is necessary to conduct a simple inspection of various aspects of the car, including (tire pressure, whether the lighting devices are damaged, whether there is any oil or water leakage, whether the electronic instruments are functioning normally, and routine checks on doors, seat belts, etc.). While driving, pay attention to whether the road conditions are good, avoid quickly passing through bumpy roads, maintain good driving habits during the journey, and listen for any unusual noises or vibrations from the car body. When parking the car, ensure the cleanliness of the car body and then check the fuel and tire pressure.

2

4

Share

Why is one side of the Mercedes-Benz R350 air conditioning cold while the other side is hot?

Introduction to the reasons why one side of the Mercedes-Benz R350 air conditioning is cold while the other side is hot 1. Insufficient refrigerant: When the refrigerant is insufficient, the evaporation and heat absorption process of the liquid refrigerant entering the evaporator ends quickly, causing the evaporator to absorb heat and cool down only when the refrigerant flows in, while there is no heat absorption effect when the refrigerant flows out. At this time, only a small part of the airflow sent by the blower is cooled, resulting in a temperature difference between the air outlets on both sides. By measuring the pressure of the high and low pressure pipelines of the air conditioning system, it can be determined whether the refrigerant is insufficient. Replenishing the refrigerant can solve the problem. 2. Low efficiency of the air conditioning compressor: The air conditioning compressor operates at low efficiency due to a malfunction, resulting in insufficient liquefaction of the refrigerant. When the refrigerant in this state enters the evaporator, the effect of evaporation and heat absorption will also be severely insufficient, leading to poor cooling performance, which is ultimately reflected in the temperature of the airflow at the air outlet not meeting the standard. 3. Dirty condenser and evaporator: If the condenser and evaporator are not cleaned for a long time, they will be covered with dust and lint, weakening the effect of the refrigerant or reducing the heat absorption efficiency when the refrigerant changes state. This prevents the air from being fully cooled, ultimately causing temperature differences in the airflow output from each air outlet.

6

1

Share

How to Determine Illegal Use of Emergency Lane?

If a vehicle experiences a malfunction, such as a flat tire, brake failure, or other issues that prevent it from driving safely or pose significant safety risks, it may use the emergency lane. If the driver suddenly falls ill and is unable to drive or continuing to drive would pose a major safety hazard, the emergency lane may also be used. Rules for U-turns at traffic lights: 1. U-turns are not allowed if there is no left-turn lane before the traffic light. 2. U-turns cannot be made on the crosswalk at the traffic light; you must proceed past the crosswalk before making a U-turn. 3. If there are explicit signs prohibiting U-turns or left turns at the traffic light intersection, U-turns are never allowed. 4. If the center line of the road at the traffic light intersection is a double solid yellow line, U-turns are not allowed. If it is a double yellow line with one solid and one dashed line, vehicles on the dashed side may make a U-turn, while vehicles on the solid side may not. 5. If there is a yellow grid line at the traffic light intersection, U-turns are permitted, but vehicles must not stop on the yellow grid line. 6. If there is a U-turn sign or a dedicated U-turn signal, you must wait for the green light before making a U-turn. 7. If there is no dedicated U-turn signal but there is a left-turn signal, you must wait in the left-turn lane for the green light before making a U-turn.

7

0

Share

How to Turn Off the Built-in Navigation Alerts in BMW?

How much does turning on the AC increase fuel consumption in an SUV?

What does it mean when the driver's license status is locked on the Traffic Management 12123 platform?

What is the gauge on the far left of the dashboard?

What Does Warranty Period Mean?

Why is one side of the Mercedes-Benz R350 air conditioning cold while the other side is hot?

How to Determine Illegal Use of Emergency Lane?

What is the size of the wiper?

Why is 4WD safer than 2WD in rainy weather?

What Causes Water Inside Car Spark Plugs?

What are the standards for obscuring license plates?