How to Turn Off the Automatic Seat Heating in the Envision?

1 Answers
McJasper
07/29/25 7:26pm
The automatic seat heating switch for the Buick Envision is located on the touchscreen in the air conditioning control area. Simply tap the seat heating icon to turn it off. Below is an introduction to the Buick Envision: 1. The 2018 Buick Envision adopts the new family design language, which includes a winged front grille, three-dimensional rear styling, 19-inch new-style wheels, and trapezoidal dual exhaust tailpipes. Additionally, the new model comes standard with an aluminum roof rack and adds two new body color options: Iron Gray and Mahogany Red. 2. In terms of configuration, the new model comes standard with six airbags, LED daytime running lights, LED taillights, keyless entry and one-button start, ANC active noise cancellation technology, engine auto start-stop, EPB electronic parking, TPMS intelligent tire pressure monitoring system, rear parking sensors, a multifunction steering wheel, cruise control, dual-zone independent automatic air conditioning, power-folding and heated exterior mirrors, and a panoramic sunroof. 3. In addition to upgrading the 28T model with Moonwhite ambient lighting, the entire lineup comes standard with an intelligent drag-reducing grille, sport mode, LED headlights, a power tailgate, an 8-inch HD touchscreen, heated leather power seats, a sliding rear seat, SBZA side blind zone alert, RCTA rear cross-traffic alert, and LCA lane change assist. Mid-to-high trim levels also feature a HUD head-up display system and an 8-inch HD driving computer.
Was this review help?
3
3
Share
More Forum Discussions

Should an automatic transmission car be put in P or N gear at traffic lights?

An automatic transmission car should be put in N gear at traffic lights. It is not recommended to put it in P gear while waiting at a red light because when the vehicle is parked in P gear, the transmission locks the gears. If the car is rear-ended at this time, it can directly crack the transmission, leading to its complete failure. For short waits at traffic lights, you can keep the car in D gear and apply the brake or handbrake. For longer waits, it is advisable to shift to N gear and then apply the handbrake to alleviate driving fatigue. The P gear in an automatic transmission is designed to assist in parking, using the engagement of internal ratchet and pawl mechanisms to lock the gears, similar to manual transmission parking but with dedicated gears. The ratchet and pawl are not 100% tightly fitted; there is a certain gap left in the design to prevent transmission damage from collisions when the P gear is engaged.
2
4
Share

What are the reasons for the Nissan Tiida's one-button start failing to ignite?

Reasons for the Nissan Tiida's one-button start failing to ignite: 1. Insufficient or depleted battery in the remote key; 2. Prolonged use of the battery leading to aging; 3. Damage to the starter itself; 4. Failure of the fuel pump resulting in no fuel supply; 5. The gear being in D (Drive) position prevents ignition; 6. Damage to the engine speed sensor causing no high-voltage spark, making the car unable to start normally. The Nissan Tiida is a vehicle produced by Dongfeng Nissan Passenger Vehicle Company, with dimensions of 4250 mm in length, 1695 mm in width, and 1535 mm in height, and a wheelbase of 2700 mm. The Tiida is equipped with a comprehensive safety system, including standard active safety features such as ABS anti-lock braking system with EBD electronic brake-force distribution, BA brake assist system, rear windshield with wiper, and high-mounted brake light.
2
5
Share

Why does an automatic car make a clunking sound when shifting into reverse?

An automatic car makes a clunking sound when shifting into reverse because the brake pedal is not pressed to the appropriate position or the car has not come to a complete stop before shifting into reverse. Before shifting into reverse, it is essential to ensure the car has fully stopped to avoid damaging the automatic transmission. There are three common types of automatic transmissions in cars: 1. AT transmission, also known as a torque converter transmission, connects to the engine via a torque converter and uses planetary gears for shifting and torque conversion; 2. Dual-clutch transmission (DCT), developed based on manual transmissions, has a structure similar to manual transmissions but includes an additional clutch and shift control mechanism; 3. CVT transmission, a relatively simple automatic transmission, consists of two cone pulleys and a steel belt that moves along the pulleys to enable shifting and torque conversion.
11
1
Share

Should You Shift to P or N Gear at a Red Light with an Automatic Transmission?

When waiting at a red light with an automatic transmission, it is recommended to shift to N gear, and you can also engage the handbrake if the wait is longer. There is no issue with shifting to N gear for short durations at a red light, but leaving it in N gear for extended periods can damage the car, especially the transmission. The reasons for not recommending shifting to P gear at a red light are: 1. Shifting to P gear without engaging the handbrake can cause damage to certain components; 2. The process of starting from P gear is cumbersome; 3. Frequently shifting to P gear can cause gear grinding in the automatic transmission, damaging the transmission bearings. The correct practice at a red light is: press the brake, shift to N gear, and when the light turns green, shift to D gear to start driving.
15
3
Share

What is the wading depth of the Grand Cherokee?

The wading depth of the Grand Cherokee is 700mm. The wading depth of the Grand Cherokee is determined by the height of the vehicle's chassis, which is the ground clearance listed in the model's parameter configuration table. Generally, the greater the ground clearance, the higher the chassis, and the higher the safety factor when passing through waterlogged roads. Therefore, in terms of safe wading depth, the advantages of off-road vehicles and SUVs are obvious. However, for most compact and small cars with low chassis, the position of the vehicle's air intake should be used as a benchmark when passing through waterlogged roads. If the air intake of the Sagitar is below the water level when wading, water will be sucked into the engine's cylinders. Since water cannot be compressed like air, it will cause severe damage to the engine's mechanical components (such as connecting rods, pistons, crankshafts, etc.). Therefore, the wading depth should not exceed the height of the engine's air intake. The height of the engine's air intake, and thus the maximum wading depth, can also be increased by installing a snorkel. If wading is unavoidable, the following safe and correct procedures should be followed: Before the vehicle enters the water, be sure to turn off the auto start-stop function to prevent the engine from automatically restarting after stalling in the water, which could cause severe damage due to water intake. Assess the underwater road conditions based on the passage of vehicles ahead and choose an appropriate entry point. Observe the path taken by other vehicles and follow their tracks at a low speed, avoiding sudden acceleration or deceleration. On roads prone to water accumulation, observe warning water level markers, trees, and reference points such as the wheels and doors of other vehicles to judge the water depth before deciding whether to proceed. Be aware of your vehicle's safe wading depth. If the water depth exceeds half of the tire height or the engine's air intake, do not proceed recklessly. Instead, choose an alternative route.
13
5
Share

Will an automatic transmission car move when shifted to D gear without pressing the accelerator?

An automatic transmission car will move when shifted to D gear without pressing the accelerator. During driving, if you need to stop and wait, it is recommended to shift the car to P gear. If the car is on an upward slope with a steep angle and the brake is not pressed, even if the car is in D gear, it will not move forward and may even roll backward. On a downhill slope without pressing the brake, the car will definitely move forward. It is important to note that some car models will not move forward when shifted to D gear without pressing the accelerator, requiring the driver to press the accelerator to continue moving. This is related to the type of transmission power coupling device. For example, Audi cars use a multi-plate clutch in their transmission. When shifted to D gear, the clutch remains disengaged, and the engine power is not transmitted, so the car will not move forward. When the driver presses the accelerator, the clutch gradually engages, allowing power to be transmitted. If the car does not move, it may be due to an incorrect signal from the transmission shift valve position sensor.
18
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.