How to turn off the automatic headlights on the 2021 RAV4?

2 Answers
AlyssaDella
07/29/25 2:22am
First, press the vehicle's one-touch start button to start the engine, keeping the car in an operational state. Otherwise, you won't be able to turn on the automatic headlight switch. Locate the lever on the left side of the steering wheel and rotate the outermost knob. Find the AUTO button for adjusting the automatic headlights and set the switch to the AUTO position. Adjust the central light control knob from the "0" position to the "AUTO" position to activate the automatic headlight function.
Was this review help?
17
4
Share
VonRonan
08/12/25 12:27pm
For 2021 RAV4 owners, turning off the automatic headlights is quite simple. First, locate the light control stalk on the left side of the steering wheel, then rotate it from the AUTO position to OFF. The automatic headlights activate in low-light conditions on sunny days, but they can sometimes turn on unnecessarily at tunnel exits or during daytime car washes, which can be annoying. Manually switching them off saves some battery. Having driven this model for a year, I use this method whenever I need to briefly turn off the lights, like during parking breaks. Don’t forget that the dashboard will display the headlight status—ensure the car is stationary when switching for safety. If you forget the steps, check the manual or the app’s assist features; the RAV4’s interface is intuitive and user-friendly. Overall, this design is thoughtful, and occasional adjustments are fine—just avoid turning them off at night to prevent reduced visibility and accidents.
Was this review help?
10
4
Share
Expand All
More Forum Discussions

What to Do If Caught Riding a Motorcycle Without a License?

Provide the driver's license and ensure no other violations during driving; a warning or fine may be issued, and the vehicle will be promptly returned. If a driver's license is provided but other violations occurred during driving, penalties will be imposed accordingly, and the vehicle will be promptly returned. If the driver fails to provide a license, penalties for unlicensed driving will be applied.
7
4
Share

What to Do When Motorcycle Screws Rust?

Soak the screws in diesel fuel first, then try to unscrew them. You can purchase a rust loosening spray, wait for a while, and then it will be much easier to unscrew. If the above methods don't work, you can use the most primitive method: slowly tap them off with a hammer using the flat impact head of an impact driver.
1
5
Share

How to Read Pressure on an Oil Pressure Gauge?

First, observe that the outer scale readings are in red, corresponding to the red unit PSI; the inner scale readings are in black, corresponding to the black unit MPa. Align your eyes with the dial scale, ensuring that your eyes, the pointer, and the scale form a straight line perpendicular to the dial. Read the value once the pressure stabilizes. inHg stands for inches of mercury, bar is a unit of pressure; MPa stands for megapascal, where 1MPa = 145 psi; PSI is pounds per square inch.
20
5
Share

How to distinguish between the recirculation and fresh air modes with one button in the Magotan?

When the vehicle's air conditioning is turned on, pressing the recirculation button will illuminate the indicator light, indicating that the recirculation mode is activated. If the air conditioning is not turned on while the vehicle is in motion, and there is airflow from the vents, it means the fresh air mode is activated.
10
0
Share

How to Clean Used Oil Containers?

Prepare some eggshells, crush them and put them into the oil bottle or container, then add hot water and shake vigorously. After a few minutes, the oil inside will come off. Prepare some fine sand and baking soda, put them into the oil bottle or container, then add hot water and shake for a while before rinsing thoroughly. Pour a little dishwashing detergent into the oil bottle or container, then add boiling water and let it sit for a while. Shake a few times before pouring out and rinsing.
13
4
Share

How to Restart After Stalling During Hill Start?

After stalling during a hill start, you need to immediately press the brake. Shift into neutral, then turn the key to restart the engine. After the engine starts, press the clutch, shift into first gear, and slowly release the clutch until the car vibrates noticeably. Then, gradually release the clutch to start using the half-clutch technique.
3
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.