···
Log in / Register

How to Turn Off the Automatic Headlights on a 2019 Corolla?

5 Answers
DeLuna
07/24/25 1:20am

To turn off the automatic headlights, simply rotate the light switch counterclockwise from the AUTO position. The automatic headlights primarily rely on a daylight sensor to determine whether the preset level of darkness has been reached, thereby automatically activating the headlights. More details about automatic headlights are as follows: 1. Automatic headlights are a design feature aimed at enhancing driver convenience and driving safety. When the light-sensitive control system detects that the external light intensity is above or below a certain threshold, the car's headlights will automatically turn on or off. 2. If the driver forgets to turn on the headlights, the car can still activate them automatically, ensuring that driving visibility is not compromised. 3. The working principle of automatic headlights mainly involves sending an electrical signal to the ECU (Electronic Control Unit) based on the external light intensity. The ECU then controls the headlight relay to switch the headlights on or off and toggle between high and low beams. When sufficient light is detected, the headlights will automatically turn off to conserve power.

Was this review help?
9
5
Share
DiLucille
08/10/25 8:40pm

I've been driving a 2019 Corolla for a while now, and the automatic headlights are a convenient feature, though sometimes I want to turn them off in parking lots or under strong daylight. The method is quite simple: On the left-side light control stalk near the steering wheel, there's a rotatable dial—just turn it to the manual OFF position to disable the auto mode. Make sure the car is turned off or in standby mode when adjusting to avoid accidental activation. The automatic headlights are designed for safety, automatically activating based on ambient light, especially at dusk or in tunnels to alert other drivers, so turning them off is only recommended when necessary. Remember to regularly check your light settings—I've forgotten to reactivate them a few times after manual adjustment, which made driving in rainy conditions a bit risky. Now I find keeping them in auto mode more hassle-free, while also improving driving safety and reducing accident risks.

Was this review help?
9
2
Share
Expand All
EstherRose
09/24/25 2:58am

Young drivers often like to tinker with small features, and turning off the automatic headlights on the 2019 Corolla is not difficult. The light switch is located on the left stalk near the steering wheel—just give it a gentle twist to manually turn them off, though the daytime running lights may remain on without issue. This feature is originally designed to be smart, automatically turning on the lights in dark areas to save you the hassle. But if you find them too bright in a parking lot during the day and want to turn them off, a quick flick will do the trick. Before operating, check if the car is running to avoid minor mishaps from accidental actions. In reality, automatic headlights offer many benefits, improving nighttime visibility and even saving fuel. Turning them off is only necessary in specific situations, such as preventing accidental activation during car washes. It's recommended to practice a few times to familiarize yourself with the switch location. Always prioritize safe driving—don’t lose sight of the bigger picture for minor conveniences.

Was this review help?
11
5
Share
Expand All
SanJuliana
11/07/25 5:09am

I have a 2019 Corolla automatic version, and the method to turn off the headlights is straightforward: simply rotate the left-side light control lever to the OFF position. However, I recommend not turning off this function lightly, as it automatically activates the lights in low-light conditions to ensure your safety and that of others. Driving conditions change rapidly, and manual switching is easy to forget, increasing risks. It's fine to turn them off in emergencies like vehicle maintenance, but always test afterward to ensure the lights can reactivate automatically. Safe driving is the bottom line, and automatic systems are designed to reduce human error. If you must operate it, try doing so while stationary to avoid distracting from driving.

Was this review help?
6
5
Share
Expand All
DeClara
12/28/25 6:56am

Last time I borrowed a friend's 2019 Corolla for a trip and wanted to turn off the overly bright automatic headlights during daytime. I tried rotating the light stalk and managed to manually turn them off—the position was obvious and operation simple. However, I don’t recommend beginners casually adjusting this setting, as automatic headlights provide safety by responding to light changes. After my own adjustment, I forgot to turn them back on and nearly had an issue at dusk. The best approach is to check the owner’s manual or ask a service station to confirm the exact steps and avoid incorrect adjustments. For daily driving, keeping the automatic mode is the most hassle-free and also protects the lifespan of the lights. If you insist on turning them off, remember to test it only in a safe location—never fiddle with it while driving—and stay alert to ensure a smooth trip.

Was this review help?
11
4
Share
Expand All
More Forum Discussions

What procedures are required for changing the color of a car?

The procedures required for changing the color of a car are: 1. Go to the vehicle inspection station to inspect the vehicle and pre-record the information; 2. After queuing up to get a number in the business hall, submit the required documents at the acceptance window: the application form for vehicle modification registration, the identity proof and copy of the vehicle owner, the vehicle registration certificate, the driving license, and a set of chassis number rubbings; 3. Pay the relevant fees at the payment window; 4. Collect the documents at the license and certificate window. Precautions for changing the color of a car include: 1. The body color cannot be the same or similar to that of special vehicles; 2. The area covered by color-changing film cannot exceed one-third of the body area; 3. The body color cannot exceed three types. Before changing the color, you can consult the vehicle inspection station to confirm whether the selected color is allowed for modification. After receiving a positive response, you can proceed with the color change and then schedule an appointment to complete the modification registration procedures.
6
2
Share

How to Remove the Air Filter of Mercedes-Benz R350?

Method for removing the air filter of Mercedes-Benz R350: First, use a screwdriver to pry open the clips on the inner side of the glove box. After opening the glove box, unclip the fasteners of the air filter cover plate. Once the cover plate is removed, the filter element can be seen and taken out. After removal, clean it by blowing off the dust or replace it directly. Taking the Mercedes-Benz R-Class 2006 R350 4MATIC as an example: It is an MPV launched by Mercedes-Benz (imported) with a length, width, and height of 5157mm, 1922mm, and 1661mm respectively, and a wheelbase of 3215mm. It is equipped with a 3.5L naturally aspirated engine, with a maximum power of 200kw, matched with a 7-speed automatic transmission.
1
3
Share

How Many Kilometers Should a Car's Fuel Filter Be Replaced?

Generally, it is recommended to replace the fuel filter every 20,000 kilometers, but this depends on the road conditions and fuel quality. Below is a detailed introduction to the car's fuel filter: 1. The function of the fuel filter is to remove water and impurities from the gasoline. 2. When the engine is running, fuel is drawn by the fuel pump through the inlet pipe into the sediment bowl of the filter. As the volume increases and the flow rate decreases, heavier water and impurity particles settle at the bottom of the bowl, while lighter impurities flow with the fuel towards the filter element. Clean fuel then permeates through the fine pores of the filter element into its interior and flows out through the fuel pipe. 3. If the fuel filter is too dirty or clogged, the main symptoms include: slow or no response when accelerating, difficulty starting the car, and sometimes requiring 2-5 attempts to start the engine. In such cases, the fuel filter should be replaced.
9
0
Share

What is the penalty for driving in the wrong direction on the highway?

Driving in the wrong direction on the highway results in a one-time deduction of 12 points and a fine. Penalties for driving in the wrong direction on the highway: According to the 'Scoring Standards for Road Traffic Safety Violations,' driving a motor vehicle without following overtaking or yielding regulations, or driving in the wrong direction, results in a deduction of 3 points; driving a motor vehicle on the highway while reversing, driving in the wrong direction, or making a U-turn across the central divider results in a deduction of 12 points. Additionally, motor vehicle drivers who violate road traffic safety laws and regulations regarding road usage may receive a warning or a fine. Precautions for driving on the highway: Maintaining a safe following distance is a prerequisite for ensuring the safety of both vehicles. Unless driving a large vehicle, it is advisable to stay as far away as possible from large vehicles when driving on the highway. Change lanes correctly. Avoid crossing multiple lanes at once, and always observe traffic conditions carefully before changing lanes, using turn signals and honking to alert other vehicles. The emergency lane is reserved for vehicles in need; unless under special circumstances, it should not be used.
6
2
Share

How to Solve the "Ticking" Sound in Focus Engine?

Ford Focus engine making a "ticking" sound may be caused by poor oil quality. Additionally, the "ticking" noise is generally from the valve or fuel injector. The causes and solutions for valve-related noises are as follows: 1. Worn or broken valve spring seats may cause noise—replace the valve spring in this case; 2. Excessive or inconsistent valve clearance can lead to noise—adjust the clearance to resolve the issue; 3. Worn or misaligned valve adjustment screws or loose lock nuts may also produce noise—adjust the screw tightness to fix the problem; 4. Too high or too low oil level in the crankcase can cause noise—check the engine oil level; 5. Worn valve guides may also result in noise—inspect or replace the valve guides; 6. Dirty lifters can cause noise—clean the hydraulic lifters; 7. Out-of-round valve seats or valve faces—grind the valve and valve face; 8. Incorrect oil viscosity selection may also cause noise—switch to a higher viscosity grade oil.
16
5
Share

What is the One-Button Start Smart Key System?

The One-Button Start Smart Key System consists of two parts: keyless entry and one-button start, with the premise of identity recognition and authentication. A switch is installed on the car handle, and as long as you approach the car within about 1 meter, the door lock will automatically open. Keyless entry uses secure identification and authentication technology, which is a contactless automatic identification technology. Each chip is unique, with very high security performance, and the chip cannot be duplicated, making it a secure car anti-theft system. Functions of the One-Button Start Smart Key System: 1. When the owner turns off the engine and leaves the car, simply close the car door, and the door lock will automatically lock and enter the anti-theft state; 2. If any side door or tailgate is not properly locked when leaving, the vehicle will automatically emit a warning sound to remind you to close the door properly.
14
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.