···
Log in / Register

How to Turn Off the Automatic Daytime Lights on the Vezel?

4 Answers
StAbel
07/29/25 11:37pm

To quickly turn off the automatic daytime lights on the Vezel, press the lock button twice, and the headlights will immediately shut off. Below is an extended introduction: 1. Introduction to automatic headlights: Automatic headlights are a light-sensitive control system installed on the front headlights by some car manufacturers for user convenience. When the light dims while driving, the headlights automatically turn on, and they turn off when the light brightens. There is a delay in the activation of automatic headlights—meaning the headlights will only turn on automatically within a few seconds after the light-sensing system detects dimming. According to traffic regulations, headlights must be turned on before entering a tunnel, so manual activation is still required when passing through tunnels. 2. Hazards of not turning off the headlights: If the headlights are left on after the car is turned off, they will drain the battery. Once the engine is off, the generator stops working, and the battery becomes the sole power source for the entire vehicle. Leaving the headlights on for extended periods can easily lead to battery depletion, affecting engine startup and shortening the battery's lifespan.

Was this review help?
11
5
Share
DiTheo
08/16/25 2:39am

As a Vezel owner, I often get asked by friends how to turn off the daytime auto lights since they stay on during the day which can be annoying. You can try rotating the light control switch on the left side of the steering wheel directly to the 'OFF' position. If that doesn't work, check the instrument cluster settings menu—you might find a daytime running lights option to disable in the vehicle settings. Be careful not to permanently turn them off as these lights are designed to enhance visibility and reduce accidents. From my experience, it's best to only turn them off in specific situations, like when parked at a light, but keep them on while driving for safety. Also, a quick reminder to check the owner's manual before fiddling to avoid causing other issues.

Was this review help?
1
5
Share
Expand All
LillianLee
10/19/25 3:08am

I've been driving for over a decade, including a Honda Vezel (HR-V), and while automatic headlights enhance safety, they can be unnecessary during daylight. To turn them off: simply locate the light control stalk or button near the steering wheel and switch to 'OFF' mode—the lights will deactivate. However, I must emphasize avoiding permanent deactivation since they significantly reduce collision risks. Temporarily disabling them while driving is acceptable, but always acknowledge the safety implications. Personally, I keep them enabled unless under special circumstances to prevent potential misjudgment by trailing vehicles. If the brightness bothers other drivers, a quick adjustment solves it effortlessly.

Was this review help?
10
4
Share
Expand All
VanRhett
12/02/25 3:44am

DIY modification enthusiasts, let's talk: The daytime auto light deactivation method for the Vezel is quite user-friendly. First, turn the light control knob to 'OFF', and it should work immediately in most cases. If it doesn't, refer to the owner's manual to find the vehicle settings menu and adjust the relevant options. I've personally tried modifying the related wiring, but I don't recommend tinkering blindly to avoid triggering circuit issues or voiding the warranty. Safety-wise, these lights are a protective measure, so avoid permanently disabling them unless absolutely necessary. A reminder to check if the switch contacts are in good condition—occasional looseness can cause failure. Using a multimeter to test the current can aid in diagnosis.

Was this review help?
10
5
Share
Expand All
More Forum Discussions

How many kilometers can the Hyundai Elantra run?

Elantra can reach 140 or 160 km/h on the highway, but the car may feel unstable and unsafe. The general speed limit on highways is 120 km/h, so it's best not to exceed the speed limit. The Elantra is a brand under Hyundai Motors, belonging to the A-class category. In terms of appearance, it features a dynamic and stylish design with naturally flowing body lines. The chrome trim enhances its sporty feel, showcasing the typical family face with fewer sharp lines but more fullness, giving it a harmonious and moderate look. The short rear end easily conveys a sense of fullness and roundness with smooth lines. More details are as follows: 1. In terms of power, it is equipped with a 1.6L γ engine and a 1.8L Nu engine, paired with a 6-speed manual transmission and a 6-speed automatic transmission. 2. In terms of configuration, it includes smart key + one-button start, driver's ventilated seat, ESS emergency braking reminder, automatic windshield defogging, tire pressure monitoring system, BOSCH brake priority system, rear air conditioning vents, and many other comfort and safety features.
13
2
Share

What Causes Engine Oil Burning in Vehicles?

Vehicle engine oil burning is caused by: 1. Use of unqualified engine oil; 2. Prolonged failure to change engine oil; 3. Cold starts with excessive throttle; 4. Extended operation with insufficient oil levels; 5. Prolonged operation under high-temperature conditions; 6. Continuous operation under overload and high-speed conditions; 7. Long-term operation in poor air quality environments without timely replacement of air filters. Methods to address vehicle oil burning include: 1. Prompt replacement of valve stem seals to ensure valve sealing; 2. Regular cleaning of carbon deposits on piston rings or direct replacement of piston rings; 3. Maintaining moderate driving habits in daily use.
19
1
Share

What are the differences between the 2020 Teana and the 2019 Teana?

The differences between the 2020 Teana and the 2019 Teana are: 1. The seat belt reminder positions are different: the 2020 Teana has seat belt reminder functions for both front and rear seats; the 2019 Teana only has a front seat belt reminder function. 2. The steering wheel materials are different: the 2020 Teana's steering wheel is made of plastic; the 2019 Teana's steering wheel comes standard with plastic but can be optionally upgraded to leather. Both the 2020 Teana and the 2019 Teana are four-door, five-seater sedans under Dongfeng Nissan, with body dimensions of length 4901mm, width 1850mm, height 1447mm, and a wheelbase of 2825mm.
2
2
Share

How to Check Vehicle Driving Route with Car Positioning?

To check a vehicle's driving route through positioning, you can install a GPS tracker. Here are the detailed components of a GPS tracking system: 1. Space Segment: Consists of 24 satellites. These orbit at 20,200 km above the Earth's surface with a 12-hour orbital period. 2. Ground Control System: Composed of monitoring stations, a master control station, and ground antennas. 3. User Equipment: The GPS receiver. Its primary function is to capture selected satellites based on a specific elevation angle and track their movements.
19
2
Share

How to Determine if an Oxygen Sensor Has Failed?

Methods to determine if an oxygen sensor has failed include: 1. Decreased engine power, increased fuel consumption, and unstable idle operation; 2. Excessive carbon content. The testing methods for an oxygen sensor are: 1. Unplug the oxygen sensor connector; 2. Use a multimeter in resistance mode to measure the resistance between pins 1 and 2 of the sensor; 3. A resistance value between 4 and 40 is normal—if the resistance is abnormal, the oxygen sensor should be replaced. The working principle of an oxygen sensor is: It uses a ceramic sensing element to measure the oxygen potential in a heating furnace or exhaust pipe, calculates the corresponding oxygen concentration based on the chemical equilibrium principle, and monitors and controls the air-fuel ratio during combustion to ensure product quality and compliance with exhaust emission standards.
12
5
Share

How to Turn Off the Fog Lights on a Teana?

The fog light switch for the Teana is located on the light control lever to the left of the steering wheel. Simply twist it to turn off the fog lights. Below is an introduction to fog lights: 1. The purpose of fog lights is to make the vehicle visible to others in foggy or rainy conditions where visibility is significantly affected by the weather. Therefore, fog lights need to have a light source with strong penetration. Most vehicles use halogen fog lights, while LED fog lights are considered more advanced. 2. Fog lights can be removed, but the removal process is relatively complex. The steps for removing fog lights are as follows: (1) Use a flathead screwdriver to gently pry from the back of the fog light grille to release the clips holding it in place. This will create a larger gap at the front. Then, carefully use the screwdriver to pry the clips securing the grille to the front bumper one by one. Once all clips are released, the fog light grille can be removed. Be sure to proceed slowly and gently to avoid breaking the plastic clips. (2) You will now see the fog light fixed to the front bumper. Upon closer inspection, you will notice that the fog light is secured by two screws. Use a T-25 spline tool to remove these screws, and keep them safe for reinstallation later. (3) After removing the screws, the fog light is held in place by two tabs inserted into the bumper's clip holes. Hold the side where the screws were removed and gently pull upward to detach the fog light.
16
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.