How to Turn Off the Auto Start-Stop System in Golf?

1 Answers
StLila
07/25/25 6:25am
Methods to turn off the auto start-stop system in Golf: 1. The auto start-stop switch button is located at the upper left corner beside the gearshift lever handle; 2. With the engine already started, press the auto start-stop button once to deactivate it; 3. The status of the auto start-stop function can be checked via the corresponding indicator light on the vehicle's dashboard - illuminated means the function is off, and pressing the button will activate the function (indicator light turns off). The Golf is a classic hatchback compact family car launched by FAW-Volkswagen. Its body dimensions are 4199mm in length, 1786mm in width, 1479mm in height, with a wheelbase of 2578mm.
Was this review help?
1
2
Share
More Forum Discussions

How to Set Up the Built-in Navigation Voice in a BMW?

You can navigate to the voice prompt option on the navigation map interface, uncheck or cross it out, just find the speaker-like icon to operate; If you cannot find the option to check/uncheck "Voice Prompts" on the map interface, you can go into the "Settings" interface to look for it; If you still cannot find the "Voice Prompts" option in the above locations, you can click into "Settings" and then select "Destination Guidance Settings."
19
2
Share

How to Remove the Porsche Headrest?

First, prepare the tools needed to remove the car headrest: one large flat-head screwdriver and one small flat-head screwdriver. Start by locating the headrest adjustment button. Press the plastic button under the headrest support rod with one hand, while using the other hand to move the support rod up and down. Press the fabric around the adjustment button slightly downward, then take the large flat-head screwdriver and insert it under the adjustment button. Use the screwdriver to pry inward.
3
3
Share

How to adjust the clutch of Baojun 560?

Loosen the limit nut on the clutch cable sheath by one to two turns, or for a hydraulic pump-type clutch, shorten the push rod of the slave cylinder. If related components are faulty or aged, replacement is necessary. Measure the free play of the clutch pedal with a ruler; the standard value is 6-13mm. If it does not match, adjust the length of the master cylinder push rod. Measure the distance from the floor to the pedal pad surface with a ruler; the standard value is 180.5mm. If it does not match, adjust the pedal stop bolt.
1
5
Share

How to Check Vehicles in Transit at a 4S Store?

First, when purchasing a vehicle, there must be a 4S store staff member handling the process, so you can directly contact the staff member who signed the contract to inquire. Nowadays, the internet is highly developed, and you can check the progress of your vehicle order by entering the order number on the official website of the vehicle brand. Secondly, if you find the above operations too troublesome due to requiring internet access or not having a network connection on your phone, you can directly call the 4S store to inquire.
8
3
Share

How to Adjust the Navigation Volume in BMW 3 Series?

Open the car navigation system and locate the navigation settings function key in the upper left corner. Click to enter the expanded page and find the "Settings" menu for the car navigation. Click on the "Settings" menu to enter the settings page, then select "Voice Announcement". Adjust the navigation volume by using the "+" or "-" buttons, or by directly sliding the control left or right. After adjusting the volume, you can also set the navigation announcement mode. Choose between detailed announcements or simple announcements according to your personal preference.
19
0
Share

How to Replace the Fender Turn Signal Light?

Locate the three soft covers at the rear of the headlight assembly. The left and right covers are for the low beam and high beam lights, respectively. There is another cover below; remove it and place it in a suitable location to prevent it from falling into the engine compartment. There is a turn signal socket with a handle. Unscrew and pull it out, then rotate the bulb to remove and replace it. This vehicle is equipped with a grid control unit.
6
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.