How to Turn Off the Auto Start-Stop in Mazda CX4?

1 Answers
StDerek
07/29/25 2:05am
To disable the auto start-stop feature in Mazda CX4, follow these steps: Locate the i-stop button on the vehicle's center console, press and hold the i-stop button until the dashboard indicator turns yellow, indicating that the auto start-stop system is turned off. However, the auto start-stop function in Mazda CX4 is enabled by default, so it needs to be manually turned off each time before driving. Additional Information: The auto start-stop system in Mazda CX4 is activated by default when the vehicle is powered on. During driving, when the vehicle comes to a temporary stop, the engine will shut down as part of the auto start-stop system's operation. Even though the engine is off, the internal lubrication system continues to circulate oil, ensuring the engine remains lubricated. The engine will restart automatically when the driver releases the brake pedal.
Was this review help?
18
5
Share
More Forum Discussions

Shouldn't You Fill Up the Gas Tank Completely?

You should not fill up the gas tank completely. Here are the hazards of overfilling the gas tank: 1. Increased fuel consumption: A full tank increases the vehicle's weight, leading to higher fuel consumption. 2. Damage to the charcoal canister: When the car is bumpy, fuel can easily enter the charcoal canister. The impurities in the fuel can clog the canister's filter, affecting the air-fuel mixture ratio in the intake manifold. 3. Fuel overflow: Gasoline expands when heated. Although the tank has a charcoal canister to absorb vapors, overfilling can still cause fuel to overflow. 4. Insufficient fuel supply: Overfilling can block the tank's vent, creating negative pressure inside the tank, which may result in insufficient fuel supply to the engine.
16
0
Share

Why are Giti Tires so cheap online?

Giti Tires are so cheap online because their overall performance is not outstanding compared to other tires, and they don't contain much self-developed technology, resulting in relatively lower costs and thus lower prices. Situations requiring tire replacement: 1. Check the tire wear indicators: Regardless of the tire brand, wear indicator marks are set in the tread grooves. When the tread depth is worn down to the same level as the raised indicator rubber, it's time to replace the tires. 2. Bulging phenomenon: If the tread bulges, it indicates localized rubber deterioration or uneven pressure. The tire may explode at any time, making continued driving very dangerous, so immediate replacement is necessary.
19
0
Share

At what temperature does the car's cooling fan start to operate?

The car engine's cooling fan typically starts to operate when the water temperature reaches around 90 degrees Celsius. Below are the maintenance methods for the car engine fan: 1. Environment: The car's radiator should not come into contact with any acidic, alkaline, or corrosive substances to avoid unnecessary damage. 2. Water quality: When maintaining the car's radiator, it is recommended to use soft water, which has better quality and can provide a more effective cooling effect in the radiator, while also preventing scale buildup that could affect heat dissipation due to water quality issues. 3. Antifreeze: When using antifreeze, to prevent corrosion to the radiator, it is essential to choose a high-quality, non-corrosive antifreeze, which can fundamentally protect the car's radiator.
6
4
Share

Why can't the motorcycle throttle up?

The reasons why a motorcycle can't throttle up are as follows: 1. Lean air-fuel mixture: There are many causes for a lean mixture, mainly including: the fuel needle adjusted too low; the fuel level set too low; partial blockage of the main jet; loose carburetor connection causing air leaks; air filter not installed; insufficient fuel supply from the tank fuel switch. 2. Poor crankshaft case sealing in a two-stroke engine: failure of the crankshaft oil seal on the generator side causing air leaks; leakage at the crankshaft case seam joint; air leaks at the joint between the crankshaft case and cylinder or incorrect piston installation direction. 3. Reed valve issues in a two-stroke engine: damaged reed valve; reverse installation of the rotary valve, causing carburetor backfire.
13
0
Share

What are the pros and cons of adding a windshield to a motorcycle?

The following details the pros and cons of adding a windshield to a motorcycle: 1. Benefits: Installing a windshield on a motorcycle helps block wind and can enhance its aesthetic appeal. 2. Drawbacks: During riding, vibrations and shaking of the windshield can impair visibility, increase eye fatigue, and add wind resistance, which negatively impacts power performance and fuel efficiency. In windy conditions, it may also adversely affect the bike's handling, posing significant safety risks. 3. Summary: Motorcycle windshields are not made of glass but rather from lightweight, durable, and easily manufacturable organic synthetic chemical transparent materials. However, their abrasion resistance is average, and they tend to increase wind resistance.
8
1
Share

How is the battery degradation of new energy vehicles?

The battery degradation of new energy vehicles is caused by lithium battery abuse, temperature factors, etc. The specific details are as follows: Lithium battery abuse: When the SOC of a lithium battery is below 120%, there is no significant capacity loss. At excessively high SOC levels, the decomposition rate of the electrolyte accelerates, forming a thick deposition layer on the graphite anode, which contains lithium that is prone to precipitation. Temperature factors: Temperature is one of the key factors affecting the lifespan of lithium batteries. Excessively high or low temperatures can reduce the content of active lithium ions, damage the structure of electrode materials, and cause the dissolution of metal ions, leading to severe battery capacity degradation.
10
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.