How to Turn Off the Auto Start-Stop Function on the Equinox?

Where is the OBD port located on the Peugeot 408?

The OBD port of the Peugeot 408 is located under the cover beneath the buttons on the left front side of the driver's seat. The green connector inside the cover is the OBD port. Here is some information about the OBD port: 1. OBD stands for On-Board Diagnostics, which translates to a detection system extended for automotive fault diagnosis. 2. Principle: The OBD system continuously monitors the engine's operating conditions to check if the vehicle's exhaust exceeds the standard. If it does, a warning is immediately issued. When a system fault occurs, the Malfunction Indicator Lamp (MIL) or Check Engine warning light will illuminate, and the Powertrain Control Module (PCM) will store the fault information in memory. The fault code can be read from the PCM through a specific procedure.

2

5

Share

Where is the keyhole of Zotye T600?

The mechanical keyhole of Zotye T600 is located on the driver's side door. You can see it by prying open the rear cover of the left outer handle with the key. Here are some relevant information about Zotye T600: 1. The T600, Zotye's first mid-size SUV model, was officially launched in Chengdu on December 22, 2013, with a price range of 100,000 to 150,000 yuan. 2. Dimensions: The length, width, and height are 4631/1893/1694mm respectively, with a wheelbase of 2807mm, providing a relatively spacious interior space. The minimum ground clearance is 161.4mm. The weight is 1541kg, and the luggage compartment volume is 344L. 3. Power: The 1.5T model is equipped with a National IV standard engine coded 15S4G, which can generate a maximum power of 119kw at an engine speed of 5500rpm.

3

5

Share

What is the difference between DOT3 and DOT4 brake fluid?

DOT4 performs better than DOT3, mainly in terms of high-temperature performance. The equilibrium reflux boiling point of DOT4 is 230°C, while that of DOT3 is 205°C. Vehicles using DOT4 brake fluid can brake more frequently. Additionally, their compositions differ. Below are the details: DOT3 is generally alcohol-ether-based. The chemical components of alcohol-ether-based brake fluid are low-polymer ethylene glycol or propylene glycol. These compounds have strong hygroscopicity, so their water content gradually increases during use or storage. Since the boiling point of brake fluid decreases as water content increases, its braking performance declines accordingly. If you find yourself needing to press the brake pedal harder to stop, a likely reason is excessive water content in the brake fluid. Brake fluid is typically replaced every two years. DOT4 is generally ester-based. Ester-based brake fluid is made by adding a large amount of borate ester to alcohol-ether-based fluid. Borate ester is formed through the esterification reaction of low-polymer ethylene glycol or propylene glycol with boric acid. Borate ester has a higher boiling point than low-polymer ethylene glycol or propylene glycol, resulting in better braking performance. Borate ester also has strong moisture resistance, as it can decompose absorbed water, slowing the decrease in boiling point caused by water absorption. Therefore, ester-based brake fluid performs better than alcohol-ether-based fluid but is also more expensive. According to GB12981-2003 "Motor Vehicle Brake Fluid," brake fluids are classified into HZY3, HZY4, and HZY5, corresponding to DOT3, DOT4, and DOT5 internationally. Precautions for using automotive brake fluid: If gasoline, diesel, or engine oil accidentally mixes into a brake system using synthetic brake fluid, the incompatibility between the fluids can reduce braking effectiveness. After driving 40,000 kilometers or using brake fluid continuously for over two years, the fluid may degrade due to prolonged use, so timely replacement is essential. For vehicles equipped with a brake fluid level warning device, regularly check if the warning light is flashing and if the sensor is functioning properly. If the brake fluid is low, replenish it promptly. Stored brake fluid should be kept between the minimum and maximum marked levels. If braking feels inconsistent during normal driving, replace the brake fluid immediately. Before replacement, clean the braking system with alcohol. If the vehicle pulls to one side during braking, conduct a comprehensive inspection of the braking system. If the wheel cylinder rubber cup is excessively swollen, the brake fluid quality may be compromised. In this case, replace it with high-quality brake fluid and replace the rubber cup as well. During seasonal changes, especially in winter, if braking performance declines, the brake fluid grade may not suit the winter climate. When replacing the fluid, choose one with lower viscosity at low temperatures. Do not mix different types or brands of brake fluid. For braking systems with special requirements, use the specified brake fluid. Since different brands and types of brake fluid have varying formulations, mixing them can degrade performance. Even if some brands claim compatibility or substitutability, their performance may still be unsatisfactory, so avoid long-term use. If water contaminates the brake fluid or if impurities or sediment are present, replace or thoroughly filter the fluid immediately. Otherwise, it may lead to insufficient braking pressure and reduced effectiveness. Replace brake fluid periodically: The volume of brake fluid changes with temperature, so the reservoir has a vent hole. Air drawn in through this hole may contain moisture or impurities, which the brake fluid absorbs or dissolves, lowering its boiling point. During prolonged braking, the braking system heats up, increasing the risk of vapor lock. Compressed air can reduce braking force or cause failure. For safety, brake fluid must be replaced regularly.

16

5

Share

Differences Between Pirelli P1 and P7 Tires

The differences between Pirelli P1 tires and Pirelli P7 tires are as follows: 1. The P1 offers strong wet grip and braking power, but cannot guarantee fuel efficiency and safety under all road conditions; The P7 utilizes Pirelli's latest materials, structure, and tread patterns to ensure fuel efficiency, environmental friendliness, comfort, and safety under various road conditions. 2. Different sizes, the P1 tire sizes range from 14-inch to 19-inch specifications; The P7 tire sizes range from 16-inch to 19-inch specifications. 3. The P1 tire only features run-flat technology, while the P7 tire allows the vehicle to continue driving without air leakage even when punctured by foreign objects.

15

5

Share

What are the length, width, and height dimensions of the Audi Q5?

The length, width, and height dimensions of the Audi Q5 are 4629mm/1898mm/1655mm, which are official data. The length of the Audi Q5 refers to the distance between two vertical lines perpendicular to the vehicle's longitudinal symmetry plane and touching the outermost protruding parts at the front and rear of the vehicle; the width refers to the distance between two planes parallel to the vehicle's longitudinal symmetry plane and touching the outermost rigid fixed protruding parts on both sides of the vehicle; the height refers to the distance between the highest point of the vehicle and the vehicle's supporting plane. The turbocharged engine of the Audi Q5 has a maximum power of 169 kW and a maximum torque of 350 Nm. This engine's maximum power speed ranges from 4300 to 6000 rpm, and its maximum torque speed ranges from 1500 to 4200 rpm. It is equipped with in-cylinder direct injection technology and uses an aluminum alloy cylinder head and a cast iron cylinder block. This engine is paired with an automatic transmission (AT). The country has relevant regulations regarding vehicle dimensions. According to the national standard "GB1589-89," the total width of a vehicle does not include side mirrors. The limitation on vehicle width is to provide sufficient lateral clearance for overtaking between adjacent lanes. In other words, under national standards, the significance of vehicle width data lies in ensuring enough space during overtaking, preventing accidents due to excessive width or situations where road markings are narrower than the vehicle's width. Additionally, national regulations stipulate that the total width of a vehicle must not exceed 2.5m to meet the usage requirements of public roads.

20

1

Share

Does a Parking Sensor Use Ultrasonic or Electromagnetic Waves?

The principle of parking sensors is based on ultrasonic waves. Below is a detailed explanation of how parking sensors work: 1. The anti-collision alarm system used during car reversing, commonly known as parking sensors, operates on ultrasonic technology. 2. When the car is in reverse gear, the reversing gear shift device automatically activates the power supply of the ultrasonic parking sensor system, which then resets and enters the working state. 3. A pulse voltage is applied to the ultrasonic transmission and echo reception circuit through a four-to-one analog switch. 4. The emitted ultrasonic waves form reflected waves upon hitting an obstacle, with some of these reflected waves returning to act on the ultrasonic sensor. 5. Through the acoustic/electrical conversion of the ultrasonic sensor, the waves are transformed into weak electrical signals. 6. The system immediately responds to the interrupt and executes the external interrupt service routine.

7

4

Share

How to Turn Off the Auto Start-Stop Function on the Equinox?

Where is the OBD port located on the Peugeot 408?

Where is the keyhole of Zotye T600?

What is the difference between DOT3 and DOT4 brake fluid?

Differences Between Pirelli P1 and P7 Tires

What are the length, width, and height dimensions of the Audi Q5?

Does a Parking Sensor Use Ultrasonic or Electromagnetic Waves?

What Causes Engine Shaking When Shutting Off?

How to distinguish the front and back of a tire?

What does the bare car price mean?

How to Replace the Battery in a Skoda Kodiaq Key?