How to Turn Off the Auto Start-Stop Function on the Buick GL8?

3 Answers
OJasmine
09/07/25 2:00am
First, press the vehicle's brake pedal to bring the car to a complete stop. Otherwise, the process of turning it off may cause damage to the vehicle's powertrain system. Then, shift the gear lever to the P (Park) position to ensure the vehicle is fully stationary, preventing any potential harm to the powertrain system when switching the auto start-stop function. After that, locate the button on the right side of the gear lever. Press this button to turn off the vehicle's auto start-stop function.
Was this review help?
10
3
Share
VonBrielle
09/18/25 8:19am
Turning off the auto start-stop in the GL8 is quite convenient. I found the button on the left side of the steering wheel, marked with an engine icon or 'A OFF.' A light press turns it off when the light comes on. You need to do this every time you start the car since the system defaults to on. I prefer to turn it off, especially in city traffic, as it reduces the jerky feeling from frequent stops and starts, making the ride more comfortable. Additionally, frequent engine starts can increase wear, and turning it off slightly extends battery life. However, keeping it on during highway driving can save fuel, but for daily commuting, I recommend manually turning it off to ensure a smoother drive. The GL8's design for this feature is straightforward and user-friendly, even for beginners. Just remember to check the button wiring during routine maintenance.
Was this review help?
9
2
Share
Expand All
EmilyFitz
09/18/25 8:20am
As a frequent driver, I find turning off the GL8's auto start-stop system super easy. There's a button near the gearshift labeled with "Start-Stop" or an "A" symbol – just press it until the indicator light comes on to confirm it's deactivated. You'll need to manually disable it every time you start the car, which prevents frequent engine shutdowns and restarts at traffic lights. With it off, the vehicle accelerates more smoothly, and family members complain less about noise. However, I've noticed that occasionally keeping it on during clear road sections saves a bit of fuel. Important note: don't disable it during rainy days, as the system helps prevent flooding-related startup issues. Ultimately, it's a convenient feature – once you're used to it, a two-second adjustment won't affect your trip.
Was this review help?
12
0
Share
Expand All
More Forum Discussions

Where is the fuel tank cap opened on the Buick Excelle?

The fuel tank cap switch of the Buick Excelle is integrated with the door lock. When the key unlocks the door, the fuel tank lock also opens. Press the fuel tank cap, and it will pop out directly. Reasons why the fuel tank cap cannot be opened: 1. The fuel tank cap is stuck or rusted; 2. The pull line is too long; 3. There is an issue with the opening handle or the lock mechanism of the fuel tank cap. The Buick Excelle is a premium mid-size car launched by SAIC General Motors, with dimensions of 4419mm in length, 1814mm in width, and 1487mm in height (GT); 4419mm in length, 1814mm in width, and 1487mm in height (XT). The Buick Excelle adopts a new family-style design language and introduces General Motors' new-generation 1.3T and 1.0T Ecotec dual-injection turbocharged engines for the first time.
2
1
Share

What does the EPC warning light in a car mean?

The EPC indicator light can illuminate in two states: during the power-on self-test and under other circumstances. The power-on self-test is an indication that the vehicle is checking the status of all sensors before driving. Generally, if the vehicle is not started after powering on, the light will turn off by itself after about 3 seconds. If the EPC light remains on after the vehicle is started or illuminates under other circumstances, the common causes include faults in the engine intake system, throttle valve, fuel system, engine, ECU control unit, or brake lights. The following are detailed explanations of the reasons for the EPC light illuminating under other circumstances: Engine intake system fault: The EPC light will illuminate if the engine intake is obstructed or insufficient. Throttle valve fault: Carbon buildup is a common issue with the throttle valve. Additionally, dirt on the valve body can affect intake and trigger the light. Fuel system fault: Issues such as substandard fuel, fuel deterioration, or poor fuel atomization can cause the light to illuminate. Engine fault: Insufficient engine pressure or problems with the intake valves or other power system components can also trigger the EPC light. ECU control unit fault: For example, interference with the vehicle computer signals or false alarms from the computer. Brake light fault: If the brake lights fail, the brake switch malfunctions, or there are issues with the brake wiring. Solutions for when the EPC light illuminates: Troubleshoot the intake system, use fuel with the appropriate octane rating, clean the throttle valve, etc. Remove carbon deposits from relevant parts. Re-flash the ECU data. If the EPC light illuminates, the owner can first try turning off the engine and restarting it to see if the light remains on. If it does not, there may be no issue, and the light could have been triggered by a temporary influence. If the light stays on or frequently illuminates, the vehicle should be taken to the nearest service center for professional diagnosis and repair to eliminate potential safety hazards. The full English name of EPC is Electronic-Power-Control, which translates to electronic power control. Most people refer to it as the engine electronic stability system. The EPC system mainly includes controllers and sensors related to the power system. When sensor data in the system is abnormal, the EPC system will take predefined actions on the power system. Common EPC indicator lights are usually displayed in two colors: yellow and red. If the EPC light is yellow and the car can still be driven, proceed slowly to a repair point for inspection. If the EPC light is red, the situation is more serious, and the driver should pull over immediately and contact a repair technician. Continuing to drive could directly damage the vehicle's core components or compromise safety.
4
0
Share

Should the Audi A8 Air Suspension Be Kept On or Off?

Audi A8 air suspension should be kept off. Basic Components of Air Suspension: A high-quality SUV must balance the comfort of a sedan with the off-road capability of an SUV, and the air suspension system is the best choice to achieve this goal. The air suspension mainly consists of a control computer, intake port, exhaust port, pneumatic front and rear shock absorbers, and an air distributor. Functions and Roles: Generally, vehicles equipped with adjustable air suspension have ground clearance sensors near the front and rear wheels. Based on the output signals from these sensors, the vehicle's computer determines changes in body height and then controls the air compressor and exhaust valves to automatically compress or extend the springs, thereby lowering or raising the chassis ground clearance to enhance high-speed stability or off-road capability.
8
0
Share

What brand of tires does the Audi A4 use?

Audi A4 uses Dunlop tires. Functions of tires: Mainly include dry grip, hydroplaning resistance, providing comfort, reducing driving noise, impact resistance, wet grip, load capacity, handling performance, average wear, and mileage. Tire cross-section structure: Can be roughly divided into 4 parts: tread, shoulder, sidewall, and bead. Each part has its own function. The tread mainly contacts the ground, the shoulder and sidewall provide support, and the bead seals with the wheel rim. Tire internal composition: The tire interior consists of multiple layers of different materials, including tread pattern, overlay, steel belt layer, stress-absorbing rubber strip, carcass ply layer, and inner liner.
8
5
Share

Is the BMW X6 a Hatchback?

BMW X6 is a hatchback. Features of a hatchback: It is a form of car body design, which, in addition to two to four side-opening doors, typically has a vertical tailgate or an inclined rear window door to open the luggage compartment, which is the main visual characteristic of this type of vehicle. Structure of a hatchback: In most markets, hatchbacks are often referred to as three-door cars (with two side doors for passenger access and one tailgate version) or five-door cars (with four side doors for passenger access and one tailgate version). In some regions, hatchbacks are not called three-door or five-door cars but are referred to as "two-door hatchbacks" or "four-door hatchbacks" (2D/4D-Hatch).
1
2
Share

What is the average fuel consumption of the Emgrand?

Emgrand's manual transmission model has a fuel consumption of 6.8 liters per 100 kilometers, while the automatic transmission model consumes 7.3 liters per 100 kilometers. Factors affecting fuel consumption: Engine displacement and fuel consumption are somewhat related, but a higher fuel consumption does not necessarily mean a larger displacement. In relative terms, the size of a car's engine displacement does not directly correlate with its fuel consumption in a proportional manner. Besides engine displacement, factors such as the car's design, weight, and engine technology also significantly influence fuel consumption. Solutions for high fuel consumption: Correct improper driving habits, maintain steady acceleration, avoid coasting in neutral, reduce vehicle load, perform regular maintenance and inspections, and address any issues promptly.
19
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.