How to Turn Off the Auto Start-Stop Function on the Buick Excelle?

1 Answers
DelRose
07/25/25 6:07am
Method to turn off the auto start-stop function on the Buick Excelle: The start-stop function switch is located next to the ignition switch or on the center console panel. After the engine starts, the auto start-stop system becomes active. Pressing the button manually deactivates the auto start-stop system. Here is an introduction to the Buick Excelle: Power: The new powertrain includes a 1.3T+48V mild hybrid engine and the classic 1.5L-DVVT four-cylinder engine. The 1.3T+48V mild hybrid engine delivers a maximum power of 83kW/6000rpm and a peak torque of 141N·m/4400rpm. The Buick Excelle Classic is equipped with a 1.5L-DVVT four-cylinder engine, producing a maximum power of 83kW and a maximum torque of 141N·m. Safety: The Excelle is equipped with the Bosch 9.1 electronic stability program, which includes traditional ABS, TCS, and ESC functions, as well as over ten electronic safety assistance features such as EBW emergency braking reminder, all standard across the lineup, making daily driving easier and safer.
Was this review help?
15
0
Share
More Forum Discussions

What are the differences between the 2019 and 2020 Nissan Sylphy?

The main differences between the 2020 and 2019 Nissan Sylphy models lie in their exterior design and configuration. The 2020 Sylphy features a more youthful and stylish exterior design, along with richer configurations. Below are the specific details about the 2020 Sylphy: 1. The front face of the 2020 Sylphy adopts Nissan's latest V-Motion 2.0 family design language, with a bold V-shaped grille that stands out prominently, paired with newly designed LED headlights on both sides. 2. The 2020 Sylphy has a length of 4641mm and a wheelbase of 2712mm, which are 10mm and 12mm longer respectively compared to the 2019 Sylphy's 4631mm length and 2700mm wheelbase. The lower body height and longer length of the 2020 model make the new Sylphy appear more slender and attractive. 3. The 2020 Sylphy is equipped with the third-generation HR16 1.6L naturally aspirated engine, which offers improved power and torque compared to the previous generation. The engine delivers a maximum power of 102kW and a maximum torque of 169N·m, featuring technologies such as mirror bore coating, e-VTC electric variable valve timing control, TCV multi-stage turbulence control, and EGR exhaust gas recirculation system. Nissan claims a minimum fuel consumption of 4.9L/100km. The engine is paired with an XTRONIC CVT continuously variable transmission and also comes with an ECO mode and ISS intelligent start-stop system.
8
0
Share

What type of fuel should a 1.4T Sagitar use?

1.4T Sagitar should use 95-octane gasoline to prevent engine knocking. Difference between 92 and 95-octane gasoline: 92-octane gasoline contains 92% isooctane and 8% n-heptane, while 95-octane gasoline contains 95% isooctane and 5% n-heptane. The gasoline octane rating represents the fuel's anti-knock performance. A higher octane number indicates better anti-knock properties, but it does not relate to the fuel's quality. A higher octane rating does not mean the gasoline is better or contains fewer impurities. Anti-knock performance refers to the gasoline's ability to resist knocking during combustion in the engine. It is the primary indicator of gasoline combustion performance. Knocking occurs when gasoline burns abnormally in the engine. The octane rating is designed to measure gasoline's resistance to knocking. A higher octane value means stronger anti-knock performance. Engines with higher compression ratios and higher combustion chamber pressures are more prone to knocking if low-octane gasoline is used. Since 95-octane gasoline has a higher octane content than 92-octane, it provides better anti-knock performance. The choice of gasoline octane should be based on the engine's compression ratio. Using higher-octane fuel unnecessarily is not advisable. If the engine's compression ratio is insufficient, the benefits of high-octane fuel cannot be utilized. Using gasoline that doesn't match the compression ratio may cause premature combustion of the fuel-air mixture during piston compression, negatively affecting engine performance.
16
2
Share

What Are the Solutions for High Water Temperature in Cruze?

The solutions for high water temperature in Cruze include the following points: 1. When the engine temperature is too high, you can touch the upper and lower water pipes to check their temperatures. If there is a significant temperature difference between the two pipes, it can be determined that the thermostat is not working. If you cannot purchase a replacement part immediately, you can remove the thermostat as an emergency measure and replace it as soon as possible after returning home. 2. If there is air in the cooling system, it can form an airlock, hindering the circulation of coolant and causing the engine temperature to rise too high. To release the air, follow these steps: Run the engine at high speed, then gently loosen the radiator cap until gas starts to escape. Some coolant will flow out with the gas. Repeat this process several times until you feel all the air has been released (you will notice a significant temperature difference in the upper and lower pipes before and after releasing the air). After troubleshooting, promptly replenish the coolant. 3. If the vehicle is driven on dirt roads or muddy sections for a long time, debris may accumulate on the radiator, which over time can reduce cooling efficiency and lead to high water temperature. In this case, you can first use compressed air to blow out the radiator grille. 4. If the temperature is too high or the temperature warning light keeps flashing, stop the vehicle and check whether the radiator coolant level is normal and if there are any leaks in the radiator or hoses. If no abnormalities are found after inspection, you can top up the coolant and continue driving. If the temperature remains high after driving a certain distance and you notice a decrease in coolant upon stopping, this is likely due to a sand hole or perforation in the engine block's water jacket. Once this issue is identified, repairs should be carried out. 5. While driving, if you notice the water temperature is too high, never pour cold water on it, as this could cause the engine block to crack. Also, do not rush to open the radiator cap to avoid being scalded by hot water. Turn off the engine and wait about 20 minutes before opening the radiator cap to add cold water as an emergency measure.
3
2
Share

What does four-zone automatic climate control mean?

Four-zone automatic climate control means an air conditioning system with four independently controlled automatic temperature zones. The functions of automotive air conditioning: Automotive air conditioning provides a comfortable cabin environment for drivers, reducing travel fatigue; it creates optimal working conditions for drivers to ensure driving safety. Automotive air conditioning systems typically include cooling units, heating units, and ventilation systems. Automatic temperature control in automotive air conditioning: Automatic temperature control is a feature of automotive air conditioning. When the cabin temperature approaches the comfort level set by the user, the compressor automatically stops operating to maintain constant temperature. When the temperature rises, the compressor automatically reactivates to ensure the cabin remains at the preset comfortable temperature.
14
0
Share

Do Commercial Vehicle Charging Piles Require a Business License?

Commercial vehicle charging piles require a business license. Types of Vehicle Charging Piles: By installation method, they can be divided into floor-mounted charging piles and wall-mounted charging piles. Floor-mounted charging piles are suitable for installation in parking spaces not close to walls. Wall-mounted charging piles are suitable for installation in parking spaces near walls. By installation location, they can be divided into public charging piles and dedicated charging piles. By the number of charging interfaces, they can be divided into single-interface charging piles and multi-interface charging piles. Functions of Vehicle Charging Piles: The primary function of charging piles is to enable various types of electric vehicles to achieve convenient charging anytime and anywhere, while also improving the efficiency and quality of vehicle operation. Vehicle charging piles are a highly practical tool.
9
3
Share

How to Deal with a Small Amount of Water in the Engine?

Methods for handling a small amount of water in the engine: Check the air filter: Inspect the air filter and the lower housing of the air filter for obvious signs of water ingress. Examine the intake pipe and intake manifold for clear traces of water. Owners can remove the air filter themselves. Check the engine oil condition: Normal engine oil colors include light yellow, brown, and transparent colorless, but it is generally not milky white. Pull out the dipstick, wipe it clean, reinsert it, and check if there is any milky white oil-water mixture. Here is additional information: Engine water ingress: Every year during the rainy season, road flooding is common, and there are cases of car engines ingesting water due to road flooding. Engine water ingress can be categorized into submerged, minor water ingress, and significant water ingress.
14
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.