How to Turn Off the Auto Start-Stop Function on the Buick Envision

2 Answers
HannahDella
07/24/25 7:53am
The auto start-stop button for the Buick Envision is located on the right side of the center console screen. When the light is on, the auto start-stop function is enabled; pressing the button to turn off the light will disable the auto start-stop function. Additional information about the Buick Envision is as follows: 1. How the Buick Envision's engine start-stop system works: When the vehicle stops moving due to traffic congestion or at an intersection, the driver presses the brake pedal and shifts into neutral. At this point, the Start/Stop system automatically checks: the engine is idling and not in gear; the system's wheel speed sensor shows zero; the electronic battery sensor indicates sufficient energy for the next start. Once these three conditions are met, the engine automatically stops. When the driver shifts into gear and presses the accelerator, the engine restarts and continues to operate. 2. Car idling: The auto start-stop technology is primarily used in traffic congestion situations, where the engine is usually warm, and the fuel consumption of a warm engine starting is minimal. The engine can typically start at 350 rpm, which is nearly half the idle speed. Assuming there are no other loads besides the engine's internal resistance during the start-up process and the necessary equipment such as the transmission's loss, the fuel consumption is certainly less than during idle conditions.
Was this review help?
6
0
Share
VanOwen
08/11/25 3:31am
I've been driving the Buick Envision for a few years, and the auto start-stop feature can be quite annoying at city traffic lights, with the engine constantly starting and stopping affecting the driving experience. Turning it off is simple—just look for the button with an "A" letter near the steering wheel or on the dashboard (sometimes labeled "Auto Stop"), press it, and the light will turn on, indicating it's deactivated. After each car start, it might reset automatically, so you'll need to press it again manually. I usually recommend checking the user manual in case of model differences, as some newer models might require adjustments through the touchscreen settings. Don't worry about fuel efficiency after turning it off—the engine starts more smoothly, especially in traffic jams, preventing constant jerking and making driving more comfortable.
Was this review help?
18
0
Share
Expand All
More Forum Discussions

Why does the car's power drop significantly when the air conditioning is turned on?

When the air conditioning is turned on, the air conditioning compressor consumes a portion of the engine's torque during operation. If the engine's output torque is small, the proportion of torque consumed by the air conditioning compressor is relatively large, which can make the driver feel a lack of acceleration. Here is some relevant information: 1. Reasons for the impact: During daily driving, especially at low speeds, the actual power of small-displacement cars is around 30 kilowatts, so the effect of the car's air conditioning is quite noticeable. However, for larger-displacement models, the impact of the air conditioning may be less obvious because larger-displacement engines have more power, and even at low speeds, they output stronger power. 2. Reasons for the power reduction: In the current design of household cars, the power of the car's air conditioning compressor comes directly from the engine, so the power available for driving the vehicle decreases, resulting in a reduction in power.
13
4
Share

Does Using Air Conditioning While Idling Consume Fuel?

Using air conditioning while the car is idling does consume fuel, and it consumes more compared to when the vehicle is in motion. Additionally, it can cause some degree of damage to the engine. Below are some tips for using car air conditioning effectively: 1. Ventilate before turning on the AC: After the car has been exposed to prolonged sunlight, open all four doors and the sunroof to allow air circulation for about 3 minutes. This helps quickly lower the interior temperature, making the air conditioning more effective when turned on. 2. Use the recirculation mode wisely: The recirculation mode blocks hot outside air, creating a sealed space inside the car. This allows the interior air to circulate rapidly under the AC's effect, achieving faster cooling. Once the interior temperature has dropped, it is recommended to switch to the fresh air mode every 30 minutes to refresh the cabin air, then switch back to recirculation after 5 minutes. 3. Turn off the AC in advance: Shut off the air conditioning about 5 minutes before parking. This protects the engine and saves fuel.
12
3
Share

What does it mean when a driver's license has not been reviewed on time?

Failure to review on time means that the required review was not conducted, resulting in overdue status. The handling methods for an overdue driver's license review are as follows: 1. Within one year: If the driver's license has been overdue for review for less than one year, the normal renewal procedures can be followed, meaning the same materials and process as a regular review. 2. Over one year: If the review is overdue for more than one year but less than three years, the applicant must first pass the subject one exam at the vehicle management office before proceeding with the renewal. 3. Over three years: For a Class C license, if overdue for three years, the license will be invalidated directly. For Class A and B licenses, if overdue for three years, the license will be downgraded, and the driver must complete the downgrade process at the vehicle management office within 30 days. Failure to do so will result in the vehicle management office directly announcing the cancellation of the driving qualification for the corresponding vehicle class.
7
5
Share

Can the clutch be released immediately when shifting from 1st to 2nd gear?

It's best to pause at the halfway point to avoid jerking. 1. Release the clutch slowly: When shifting from 1st to 2nd gear, do not release the clutch quickly, as this will cause the car to lose smooth operation. Power transmission should be linear, not abrupt. At this point, the clutch of the transmission is connecting to the small gear of the transmission, which involves a concept of one end being larger and the other smaller. Therefore, the clutch should be held for a moment to prevent stalling. 2. Points to note when shifting gears: Keep in mind the principle of 'accelerate before upshifting, decelerate before downshifting.' Shifting should be timely, correct, smooth, and quick. Upshifting should not skip gears, but downshifting can, such as shifting from 5th to 2nd gear. If you accidentally shift into the wrong gear or can't engage a gear, don't panic; return to the original gear and try again.
6
1
Share

Until When is the Highway Toll-Free?

Under normal circumstances, the toll-free periods on highways are during four national statutory holidays: the Spring Festival, Qingming Festival, Labor Day, and National Day, as well as other statutory holidays or consecutive rest days determined by the State Council's General Office documents for that year. For example, during the 2020 pandemic, highways remained toll-free for an extended period. Additional information: 1. Eligible vehicles for toll-free passage: The vehicle types eligible for toll-free highway passage are determined based on the vehicle type specified in the vehicle registration certificate. Toll-free vehicles include micro buses, sedans, small passenger cars, small off-road vehicles with seven seats or fewer, and motorcycles allowed to operate on regular toll roads. However, micro trucks, light trucks, and special-purpose vehicles are excluded. 2. Highway toll policy: According to the unified arrangement by the Ministry of Transport, starting from 00:00 on April 25, 2020, highways will comprehensively carry out full-section and full-process testing and implement normalized management. All toll highway entrance and exit lanes will transition from the current 'raised barrier' passage back to the normal 'lowered barrier' state.
4
4
Share

What Are the Common Causes of Electronic Control Engine Failures?

Engine failures can be attributed to the following reasons: 1. Poor combustion of the air-fuel mixture; 2. Intake issues; 3. Sensor problems; 4. Maintenance issues; 5. Fuel quality problems. Here is a related introduction to the engine: 1. Components: The engine consists of two major mechanisms: the crank-connecting rod mechanism and the valve train mechanism, along with five major systems: cooling, lubrication, ignition, fuel supply, and starting systems. Key components include the piston pin, connecting rod, crankshaft, flywheel, cylinder block, cylinder head, and piston. 2. Cylinder Operation: The cylinder is the working chamber of a reciprocating piston internal combustion engine, with a cylindrical surface characteristic. The piston, connected to one end of the connecting rod via the piston pin, reciprocates within the cylinder. The other end of the connecting rod is attached to the crankshaft, which is supported by bearings on the cylinder block, allowing rotation within the bearings and forming the crank-connecting rod mechanism.
14
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.