How to turn off the auto start-stop function of the XT5?

2 Answers
DelStella
07/24/25 12:10pm
To turn off the auto start-stop function of the XT5, press the auto start-stop switch located on the left side of the central control screen. Taking the 2021 XT5 as an example, it is a mid-size SUV with the following dimensions: length 4813mm, width 1903mm, height 1682mm, wheelbase 2857mm, fuel tank capacity 73L, and curb weight 1830kg. The 2021 XT5 is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 237PS, maximum torque of 350Nm, and maximum power of 174kW, paired with a 9-speed automatic transmission.
Was this review help?
9
5
Share
LeGrant
08/11/25 6:19am
Speaking of how to disable the auto start-stop function on the Cadillac XT5, as a veteran driver who's owned this model for several years, I must be honest: you have to manually turn it off every time after starting the car, otherwise the engine keeps shutting down and restarting automatically, which is both harmful to the vehicle and annoying. The operation is quite simple: right after starting the car, locate the button with a circled 'A' symbol on the lower right side of the center console, press it firmly, and a yellow light will illuminate on the dashboard indicating it's deactivated. I recommend fellow drivers develop the habit of turning it off immediately upon starting—this prevents unnecessary cycling during traffic jams, protecting the engine while enhancing driving comfort. If the button is hard to find, the manual contains illustrations, and just be careful not to accidentally press other buttons nearby.
Was this review help?
12
3
Share
Expand All
More Forum Discussions

What exactly does the highest point of the wiper refer to?

The highest point of the wiper is located at the far right of the front windshield. Here is some relevant information about wipers: 1. Introduction: Wipers, also known as windshield wipers, water wipers, or windscreen wipers, are devices used to remove raindrops and dust attached to the vehicle's windshield, improving the driver's visibility and enhancing driving safety. 2. Expansion: Due to legal requirements, almost all vehicles worldwide are equipped with wipers. Rear windows of hatchbacks and SUVs also have wipers. In addition to cars, other means of transportation, such as trains and trams, are equipped with wipers. Some engineering machinery, such as cranes, also have wipers installed.
20
2
Share

What does car EQ mean?

Car audio EQ refers to the equalizer. The functions and principles of EQ are introduced as follows: Functions of EQ: EQ comes with multiple preset sound adjustment modes to create audio effects for playing different music, providing a good sound environment. Even without professional knowledge, it won't interfere with the sound field. Simply press the preset button to achieve the preset effect. Principles of EQ: EQ is an electronic device that can separately adjust the amplification of electrical signals at various frequency components. Therefore, it has the function of repairing or modifying various sound sources and eliminating feedback noise. This kind of device is most commonly found on various musical instruments. Generally, the equalizer on a mixer can only adjust the high, mid, and low-frequency electrical signals separately.
7
2
Share

What is the Ramp Speed Limit?

Generally, vehicles are required to maintain a speed below 40km/h when driving on highway ramps. Below are relevant guidelines on how vehicles should navigate highway ramps: 1. Before entering a highway ramp, drivers should reduce speed in advance and pay attention to speed limit signs posted alongside the ramp. Overtaking on ramps is prohibited. 2. When approaching the ramp junction, do not immediately merge into the main lane. Instead, first enter the acceleration lane to increase speed to the required limit, then safely parallel merge into the main traffic lane. 3. Prior to exiting the main lane onto a ramp, reduce speed early, observe ramp indicator signs, and avoid crossing over the guide lines to prevent missing the ramp exit. If a ramp exit is missed, U-turns are not permitted; proceed to the next exit to leave the highway.
16
0
Share

What to Do When a Car Is Full of Dents from Hail?

If a car is dented all over by hail, the dents on the body caused by hail can be flattened using metalworking techniques, followed by applying putty and repainting. The process and purpose of vehicle repainting are introduced as follows: Vehicle Repainting Process: Cleaning, inspection, evaluation, and masking; masking and degreasing; removing old paint; applying putty; sanding putty and old coatings; degreasing and masking; applying primer; sanding the intermediate primer. Purpose of Vehicle Repainting: Protective Function: Cars are widely used, have extensive activity ranges, and operate in complex environments. They are often exposed to moisture, microbes, ultraviolet rays, and other acidic or alkaline gases and liquids, and sometimes suffer from abrasions or scratches. Applying paint on the surface can protect the car from damage and extend its service life.
2
3
Share

Will the Passenger Seat Be Captured for Not Wearing a Seat Belt?

The passenger seat will be captured for not wearing a seat belt. Below are the inspection items for seat belts and an introduction to their functions: Seat Belt Inspection Items: Mainly check for any visible damage, ensure the locking mechanism functions properly, verify the retractor retracts with sufficient force, confirm the retractor locking mechanism operates normally, and ensure the sensitivity meets usage requirements. Functions of Seat Belts: Seat belts consist of safety ropes, buffers, automatic speed difference controllers, self-locking devices, straps, connectors, and adjusters. They are essential safety devices for vehicle occupants and should be regularly inspected and maintained, with timely replacements if issues arise. In the event of an emergency stop, seat belts restrain the driver and passengers in their seats to prevent forward movement, thereby protecting them from secondary collision injuries.
11
1
Share

What Causes the Front Hood of a Car to Get Hot?

Here are the reasons why the front hood of a car gets hot: 1. Engine warming up after startup: The engine begins to heat up rapidly immediately after starting, as it needs to reach a certain temperature to perform optimally. 2. Heat generated by gas combustion: The rapid combustion and expansion of the air-fuel mixture in the cylinders during ignition to drive piston movement produces significant heat. 3. Heat blown into the engine compartment: While driving, the wind generated by the car's speed and the radiator fan blows heat from the radiator into the engine compartment. Since the hood is made of metal, it heats up quickly. 4. Metal hood absorbs heat rapidly: The heat generated by the engine and radiator is dissipated to the hood. As long as the temperature gauge on the dashboard does not indicate overheating, there is no issue.
16
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.