···
Log in / Register

How to Turn Off the Auto Start-Stop Function in Volkswagen Teramont?

3 Answers
LaylaRose
07/28/25 8:21am
The method to turn off the auto start-stop function in Volkswagen Teramont is: directly press the auto start-stop button, usually a circular arrow containing the letter 'A'. The dashboard will indicate that the system is turned off. To reactivate this function, simply press the button again. The engine start-stop system automatically shuts off the engine when the vehicle comes to a temporary stop during driving and restarts it when it's time to move forward again. Taking the 2022 Volkswagen Teramont as an example, it is a mid-to-large-sized SUV with the following dimensions: length 5039mm, width 1989mm, height 1773mm, wheelbase 2980mm, fuel tank capacity 70l, and curb weight 2005kg.
Was this review help?
5
0
Share
Hector
08/11/25 3:15pm
Turning off the auto start-stop on my Volkswagen Teramont is quite simple. First, sit in the driver's seat and start the engine, then look to the left side of the dashboard. You'll find a small button with a circle and the letter 'A' icon—that's the one! Press the button, and the light indicates it's turned off. After disabling it, you'll need to press it again each time you start the car since it defaults to being on. I always turn this feature off when driving, especially in city traffic where frequent engine stops and starts can be annoying, affect battery life, and increase wear on engine components. However, if you're aiming to save fuel, keeping it on is more environmentally friendly. Just remember not to permanently disable the system unless there's a malfunction, as it could affect the warranty. Regularly check that the button is functioning properly; it's located on a small panel below the steering wheel and is easy to find.
Was this review help?
6
5
Share
Expand All
DelJessica
09/28/25 3:02am
I find the auto start-stop feature in the Volkswagen Teramont quite practical, but sometimes it's better to turn it off, especially in congested traffic. The operation is straightforward: after starting the vehicle, locate the button with an 'A' symbol in the control area on the left side of the cockpit. Press it once, and the light will illuminate, indicating the feature is deactivated. You'll need to manually disable it for each trip. I often turn it off because frequent start-stops increase noise, affecting driving comfort, particularly at traffic lights. Deactivating it may slightly increase fuel consumption, but it protects the battery and starting system. The Teramont's sensors monitor speed and temperature to determine start-stop activation, and disabling the feature won't harm the vehicle. However, newer models allow customization via the central control screen—try ECO mode to reduce start-stop frequency. I recommend turning it off in heavy traffic for greater peace of mind.
Was this review help?
1
5
Share
Expand All
More Forum Discussions

What is the function of a convex mirror?

The functions of a convex mirror are as follows: 1. The convex mirror on a car's rearview mirror is designed to expand the field of view, displaying more objects, and assisting the driver in better seeing the road conditions behind. 2. The convex lens in car headlights can converge light and also gather scattered light into parallel beams. 3. Car headlights use convex lenses to transform the light emitted by the bulb into parallel beams, allowing it to illuminate farther distances. Introduction to convex mirrors: 1. A convex mirror, also known as a wide-angle mirror, reflector, or corner mirror, is primarily used at various curves and intersections to broaden the driver's field of vision, enabling earlier detection of oncoming vehicles around bends, thereby reducing the occurrence of traffic accidents; it is also used for theft prevention in supermarkets and monitoring blind spots. 2. A convex lens is composed of two transparent spherical surfaces; it refracts light to form images, which can be inverted and magnified, equal in size, reduced real images, or upright and magnified virtual images.
12
0
Share

What are the engine displacements of the Prado?

The Prado comes with engine displacements of 2.7L, 3.5L, and 4.0L. Engine displacement refers to the volume of fluid that an engine can intake or exhaust per stroke or cycle. Taking the 2019 Prado as an example, its body dimensions are: length 4840mm, width 1885mm, height 1890mm, with a wheelbase of 2790mm and a fuel tank capacity of 87L. The 2019 Prado features a double-wishbone independent front suspension and a four-link non-independent rear suspension. It is equipped with a 3.5L naturally aspirated engine, delivering a maximum horsepower of 280PS, a maximum power of 206kW, and a maximum torque of 365Nm, paired with a 6-speed automatic transmission.
12
4
Share

What are the reasons for the transmission warning light in Trumpchi vehicles?

The reasons for the transmission warning light in Trumpchi vehicles are: 1. Lack of automatic transmission fluid; 2. Failure to increase starting speed due to one-way clutch slippage; 3. Engine oil leakage; 4. Ignition coil or circuit malfunction. Taking the 2021 manual luxury edition Trumpchi GS4 as an example, its body dimensions are: 4545mm in length, 1856mm in width, 1700mm in height, with a wheelbase of 2680mm. The 2021 manual luxury edition Trumpchi GS4 features a MacPherson independent front suspension and a multi-link independent rear suspension. It is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 169PS, a maximum power of 124kW, and a maximum torque of 265Nm.
19
4
Share

What is the method for shifting gears in a manual transmission?

Manual transmission shifting method is: 1. Before shifting, observe the engine speed. Manual transmission vehicles should shift gears when the RPM reaches 2000 to 2500, which prevents issues like sluggish acceleration, jerking, or unresponsive throttle after shifting; 2. Once the RPM meets the condition, fully depress the clutch pedal while releasing the throttle, then move the gear lever to the corresponding position; 3. After engaging the gear, gradually release the clutch to the half-engagement point. When the vehicle's power output and transmission system connect smoothly, gently press the throttle to apply power, then slowly release the clutch completely. Manual transmission requires manually moving the gearshift lever to change gear meshing positions inside the transmission, thereby altering gear ratios to achieve speed variation.
9
2
Share

When will the China VI policy be implemented?

The China VI standard will be officially implemented on July 1, 2023. The China VI standard is divided into two phases, a and b. Starting from July 1, 2019 at the earliest, all light-duty vehicles sold and registered must comply with China VI. The requirements for the two phases are as follows: 1. Phase a requirement: By July 1, 2023 at the latest, all light-duty vehicles sold and registered must comply with China VI. 2. Phase b limit requirement: This means that China VI a can only be considered a transitional phase, while China VI b is the true China VI phase. Note: Currently, some regions have implemented the China VI emission standard ahead of schedule. For example, Guangzhou implemented the China VI emission standard for light-duty gasoline and diesel vehicles starting from March 1, 2019; Shenzhen required light-duty diesel vehicles to comply with the China VI standard from July 1, 2018, and light-duty gasoline vehicles to comply with the China VI standard from July 1, 2019.
3
0
Share

How to reset the maintenance light on an Audi A6?

Audi A6 maintenance light reset method is: 1. Press the CAR button, at which point the MMI display will show the vehicle system interface; 2. Rotate the knob to select "Maintenance and Inspection," then press the knob to confirm entry into the maintenance and inspection interface; 3. Under the maintenance and inspection submenu, select "Maintenance Cycle," press the knob to confirm entry into the next submenu; 4. Follow the prompts to reset the maintenance cycle to complete the maintenance light reset. Taking the 2021 Audi A6 as an example, it belongs to the mid-to-large sedan category, with body dimensions of: length 5038mm, width 1886mm, height 1475mm, wheelbase 3024mm, and a fuel tank capacity of 73L. The 2021 Audi A6 is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 190PS and a maximum power of 140kW, paired with a 7-speed dual-clutch transmission.
16
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.