···
Log in / Register

How to Turn Off the Auto Start-Stop Function in the Teramont?

4 Answers
FelicityRose
07/29/25 6:01am

The method to turn off the auto start-stop function in the Teramont is: directly press the auto start-stop button, and the dashboard will indicate that the system is turned off. If you want to use this function again, press the button to turn it back on. The auto start-stop function automatically shuts off the engine when the vehicle comes to a temporary stop during driving and restarts the engine when it's time to move forward again. The working principle of the start-stop system is: when the vehicle stops moving due to traffic congestion or at an intersection, the driver presses the brake pedal and shifts into neutral. The Teramont is a mid-to-large SUV under SAIC Volkswagen, with body dimensions of 5039mm in length, 1989mm in width, and 1773mm in height, and a wheelbase of 2980mm.

Was this review help?
6
1
Share
GiselleLynn
08/12/25 8:52pm

Turning off the Touareg's start-stop function is actually quite simple. I often manually disable it myself while driving, especially in congested areas where the constant engine restarts feel uncomfortable and disrupt driving rhythm. Just locate the 'A' icon button near the steering wheel and press it lightly - this keeps the system deactivated for the current driving session. Do note that the start-stop system defaults to 'on' with every ignition cycle, requiring manual deactivation each time. I recommend flexibly using this feature based on road conditions: enable it on highways for fuel savings, but disable during frequent city stops for smoother operation. The Touareg's design is quite user-friendly here, though aging batteries may cause delayed start-stop response - checking battery health could help in such cases. Ultimately, it's all about taking action safely and prioritizing driving comfort.

Was this review help?
20
1
Share
Expand All
VanessaLee
10/03/25 8:33am

As a Volkswagen Teramont owner, I usually manually turn off the start-stop system during daily commutes because its frequent engine restarts at red lights cause cabin vibrations that are quite annoying. The operation is simple—just press the 'A' button located at the lower left of the center console to temporarily deactivate it. It automatically reactivates on the next drive, so I have to press it again. I only enable it for fuel savings during long highway trips, but in city driving, turning it off feels more comfortable. Occasionally, when the battery is low, the start-stop may not function. In such cases, I first check the vehicle health records. If everything's fine, I continue using the button control—it's straightforward and requires no overthinking.

Was this review help?
4
5
Share
Expand All
SanAlan
11/17/25 3:24am

To deactivate the Touareg's start-stop system, simply press the 'A' button on the console, typically located near the steering wheel for easy access. The system is enabled by default upon ignition, requiring manual deactivation for long-term effect. If the button malfunctions, potential causes include relay failure or configuration issues – first check the vehicle settings menu options or consult the user manual for troubleshooting. While start-stop conserves fuel during prolonged stops, some drivers report noticeable vibrations during frequent short-stop cycles, finding greater stability when deactivated.

Was this review help?
1
2
Share
Expand All
More Forum Discussions

What is the curved panel above the wheel called?

The curved panel above the wheel is called a fender. Fender: The fender is a body outer panel that covers the wheel, named for its resemblance to a bird's wing in shape and position on older vehicle bodies. Based on installation location, it is divided into front fenders and rear fenders. The front fender is installed at the front wheel area and must ensure maximum clearance for wheel rotation and jumping. Therefore, designers use "wheel travel diagrams" to verify whether the fender's design dimensions are appropriate based on the selected tire model and size. Fender location: The fender is positioned above the vehicle's wheels, serving as the outer panel on the vehicle's side, and is molded from resin. The fender consists of an outer panel section and a reinforcement section integrally formed from resin. The outer panel section is exposed on the vehicle's side, while the reinforcement section extends along the edge of the outer panel section adjacent to neighboring components. Additionally, an engagement section for fitting with adjacent components is formed between the outer panel's edge and the reinforcement section.
9
2
Share

Can Temporary License Plate Speeding Violations Be Captured?

Temporary license plate speeding violations can be captured. Here are the detailed explanations: Current surveillance facilities are highly intelligent: High-definition surveillance cameras are installed on highways to capture speeding, illegal parking, and other violations 24/7. Additionally, mobile speed detection vehicles patrol highways continuously. Many intersections are equipped with smart electronic police, and road patrol officers have significantly increased, equipped with body cameras, forming an evidence chain to collaboratively enforce traffic laws. Penalties for speeding: Speeding within 10% results in a warning. Speeding between 10%-20% incurs 3 penalty points, 20%-50% incurs 6 points, and exceeding 50% incurs 12 points, along with varying fines.
4
3
Share

Can an A2 driver's license with 9 points deducted be reviewed on 12123?

It cannot be reviewed on the 12123 platform. It is recommended to bring your ID card, driver's license, and vehicle registration certificate directly to the traffic police station's violation handling window for verification. Annual Review Considerations: During the annual review, the vehicle management office will inspect the vehicle's lighting. If the vehicle's lights are found to be too dim or too bright, it will be deemed unqualified and will not pass the annual review. If the lights are too dim, check the lighting circuit and bulbs for aging, and replace the relevant components if necessary. If xenon headlights have been installed, it is recommended to restore the original headlights before the annual review to pass the inspection. Annual Review Procedures: First, after submitting the review application, the vehicle will undergo an online inspection. The vehicle will be driven into the automatic inspection area to sequentially check whether the exhaust emissions, speed, lighting, side slip, and chassis meet the standards. All items must pass to proceed. Next is the appearance inspection, verifying the vehicle's license plate, type, body color, engine number, VIN code, and frame number for accuracy. Then, the body appearance will be inspected, including details such as the bumper, engine compartment, rearview mirrors, lower mirrors, window glass, paint, engine operation status, and the interior and wheels of passenger vehicles. Finally, the owner can obtain the inspection report and application form from the inspector. If all inspection items pass, the owner can proceed to pay the inspection fee and collect the vehicle registration certificate and qualification label. If any items fail, the owner must repair them and participate in a re-inspection until they pass before proceeding with the visa procedures.
17
0
Share

Is There Intentional Elimination in Subject 2 Driving Test?

Subject 2 does not involve intentional elimination. As long as you truly master traffic regulations and driving skills, you will definitely pass the Subject 2 test smoothly. Content of Subject 2 assessment: Subject 2, also known as the small road test, is part of the motor vehicle driver's license examination. It is the abbreviated term for the field driving skills test. For the C1 license, the test items include five mandatory components: reverse parking, parallel parking, stopping and starting on a slope, right-angle turns, and curve driving (commonly known as S-curve). Some regions may include a sixth item: highway toll card collection. For the C2 license, the test includes four mandatory components: reverse parking, parallel parking, right-angle turns, and curve driving (commonly known as S-curve). Precautions for Subject 2 test: When performing reverse parking, pay attention to controlling the speed. Starting must be completed within 30 seconds; during parallel parking, maintain a proper 30cm side distance and reference points; during curve driving, adjust the vehicle body slowly to ensure the wheels do not cross the lines; during right-angle turns, find the right moment to steer the wheel.
3
5
Share

What does one-touch power window mean?

One-touch power window refers to a system where the car window glass can be controlled to move up or down to the desired position with a single press of a button. Overview of one-touch power window: The one-touch power window function is a system where the car window glass can be controlled to move up or down to the desired position with a single press of a button. It is mainly designed for the convenience of drivers and passengers, avoiding the distraction caused by manually operating the windows and thereby improving safety. Usage method: When using it, you need to hold down the switch, and release the button when the window reaches the desired position, stopping the movement. Cars equipped with one-touch power windows have a two-stage window control switch. The first stage functions the same as a regular power window. The second stage allows you to press and release the button, and the window will automatically open or close completely.
8
4
Share

How many inspections per year are required for a car after 15 years?

Twice. Below are the relevant details: 1. Regulations: Small and micro non-operational passenger vehicles must undergo inspection once every 2 years within the first 6 years; once every year after exceeding 6 years; and once every 6 months after exceeding 15 years. 2. Requirements: During power inspection for private vehicles, the chassis output power must not be lower than 60% of the engine's rated power or 65% of the maximum net power. Additionally, the new standard stipulates that vehicles failing safety or environmental standards during an inspection cycle will be mandatorily scrapped. The power inspection will replace the current fuel consumption test to phase out vehicles with poor performance indicators.
12
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.