How to Turn Off the Auto Start-Stop Function in the 14th Generation Sylphy?

2 Answers
EvelynRose
07/29/25 6:11am
14th Generation Sylphy Auto Start-Stop needs to be turned off, simply press the auto start-stop button. Here is some information about auto start-stop: 1. Auto start-stop temporarily shuts off the engine (e.g., at traffic lights), during which you must keep your foot on the brake pedal and not release it. Releasing the brake pedal will restart the engine. 2. The auto start-stop function can only be permanently disabled by reprogramming the code; otherwise, the driver needs to manually turn it off each time when using the car. 3. When the battery level is <60%, the auto start-stop function remains dormant.
Was this review help?
14
0
Share
Clayton
08/12/25 9:39am
I've been driving the 14th-generation Sylphy for a while now, and I always turn off the auto start-stop function every time I get in the car. On the left side of the dashboard near the steering wheel, there's a button with an 'A' inside a circular arrow. Press it once to turn it off, and the button's indicator light will turn yellow, confirming it's deactivated. The annoying part is that this setting resets to default (on) every time you restart the engine, so you need to make it a habit to manually disable it before driving each time. Some people mistake this for a malfunction, but actually, all Nissan models are designed this way. It's recommended to turn it off in heavy traffic or at frequent red lights for peace of mind, as frequent start-stop cycles do put strain on the battery. You might also notice power hesitation when the air conditioning compressor is running. However, it's quite useful for saving fuel during prolonged stops. When you want to conserve fuel during long idling periods, activating it is a good idea.
Was this review help?
18
5
Share
Expand All
More Forum Discussions

How to Confirm ETC is Working Properly?

To confirm the ETC is working properly, remove the ETC bank card and then reinsert it into the electronic tag. After hearing a beep sound, if the electronic tag screen displays 'Debit Card' or shows the amount, then the ETC is functioning normally. If inserting the ETC card into the electronic tag results in messages like 'Electronic Tag Invalid' or 'No Card Inserted,' it indicates an issue with the electronic tag, requiring reactivation and reinstallation at an ETC service outlet. ETC, short for Electronic Toll Collection, is an electronic system that enables vehicles to pass through toll stations without stopping. It identifies vehicles, records information, and automatically deducts the corresponding funds from a pre-linked IC card or bank account. It is an internationally promoted electronic toll collection system for roads, bridges, and tunnels.
5
3
Share

How to Solve Car Audio Problems?

1. If the car suddenly has no sound, first check if the CD player's power supply is normal. As long as there is power, the indicator light should be on, and the CD player compartment should open and close normally. If there is no power, check the power supply, including the fuse box and wiring. 2. If the car audio has been modified, check the modified fuse or specifically inspect whether the audio output line has come loose. 3. If the audio suddenly stops working and it does not affect the car's operation, you can visit a nearby professional repair shop. Car audio is a radio and playback device installed to alleviate the boredom of drivers and passengers during travel. The earliest used was the car AM radio, followed by AM/FM radios and tape players. Nowadays, car audio has reached a high standard in terms of sound quality, operation, and shock resistance, capable of handling the bumps on rough roads while ensuring stable performance and perfect sound quality.
4
0
Share

How to Follow a Car Slowly for Beginners?

Key points for beginners to follow a car slowly are as follows: 1. Leave space for rolling back on uphill sections: When driving on uphill roads or overpasses and encountering stop-and-go traffic, always leave enough distance to prevent the car in front from rolling back when starting. Pay special attention to overloaded large trucks—it's best not to follow them and to leave a longer-than-normal distance to prevent them from rolling backward. 2. Determine the following distance based on speed: While driving, the faster the speed, the greater the distance between vehicles should be. Generally, the vehicle spacing should roughly equal the speed in kilometers per hour. For example, at 70 km/h, the spacing should be more than 70 meters. If the road ahead is clear and you can observe the traffic conditions well, you can slightly reduce the distance to a point where other vehicles can't easily cut in. 3. Follow slowly in crowded areas: During long-distance driving, maintain a good rhythm and take breaks. When passing through towns, especially crowded roads, it's best to follow a large vehicle slowly and relax. In heavy fog with poor visibility, if there's a car ahead, follow it and avoid overtaking just because it's moving slowly. 4. Increase spacing when following a large vehicle: Small cars following large vehicles are more affected by the leading car, so increase the spacing appropriately and closely monitor the leading car's movements. When following a bus in busy urban areas, be patient. If overtaking is necessary, observe the situation from a distance to ensure no sudden appearance of pedestrians or cyclists during the maneuver. 5. Stay calm while following: During following, if pedestrians or non-motorized vehicles cut in, remain patient and avoid frustration. Especially at crosswalks, actively yield to pedestrians to demonstrate good professional ethics.
5
3
Share

How Soon Can a New Car Go on the Highway?

New cars can go on the highway at any time. Newly purchased cars have a break-in period, during which the car can drive at high speeds as long as the engine is not operated at excessively high RPMs. Running the engine at high RPMs during the break-in period can increase engine wear. When driving on the highway, the following points should be noted: 1. Maintain a safe distance from the vehicle in front and avoid getting too close; 2. Drive in the appropriate lane—faster vehicles should stay in the fast lane, while slower ones should use the slow lane; 3. In case of an emergency on the highway, park the vehicle in the emergency lane, turn on the hazard warning lights, and place a warning sign 150 meters behind the car; 4. Private vehicles are prohibited from using the emergency lane for driving. Maintaining a safe distance while driving is the best preventive measure to effectively avoid traffic accidents on the highway.
10
5
Share

How to Solve the Problem of Fast Blinking Turn Signals?

Turn signals blinking too fast can be resolved by: 1. Checking if the flasher relay is functioning properly. Use a multimeter to measure the output line of the flasher relay to see if there is a 12v output; 2. Inspecting the bulb and its socket for poor contact; 3. Verifying if the bulb's wattage is too high, and replacing it with one that meets specifications. Turn signals are a fundamental component of a vehicle's safety functions and play a crucial role in safe driving. Therefore, during maintenance and care of turn signals, pay attention to: 1. Avoiding low-quality bulbs, as the performance of the bulb is vital since it affects usage effectiveness and driving safety; 2. Performing regular maintenance. If the brightness of the lights is insufficient or they are damaged, replace or repair them promptly; 3. Conducting routine checks. During annual inspections, the performance and condition of the lights will be tested.
8
3
Share

How long does it take to register a new car?

New car registration usually takes about 2 to 15 days. Registration refers to the official license plate application process. The registration process includes: Purchasing the vehicle; Obtaining the purchase invoice from the 4S store; Paying the vehicle purchase tax; Completing registration procedures and selecting a license plate number at the vehicle management office; Receiving the license plate. The time required for license plate issuance varies significantly depending on the selection method. New car license plate registration methods include: Online self-selection, which requires mailing from the vehicle management office and typically takes 7 to 15 days; On-site self-selection, where the license plate can be issued immediately after selection. If the registration process is incomplete, a temporary license plate can be obtained. It's important to note that while there's no fixed deadline for registration, the vehicle purchase tax must be paid within two months. Late payment will incur penalties, and registration can only proceed after the purchase tax is paid.
4
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.