How to Turn Off the Auto Start-Stop Function in Nissan X-Trail?

1 Answers
DeCorbin
07/30/25 6:53am
To turn off the auto start-stop function in the X-Trail, locate the auto start-stop system button, which is positioned to the left of the main steering wheel. Simply press this button to deactivate the auto start-stop system. The engine auto start-stop system automatically shuts off the engine when the vehicle comes to a temporary stop (e.g., at a red light) and restarts the engine when it's time to move forward again. Here are some scenarios when it's advisable to turn off the function: The auto start-stop function needs to be manually turned off each time you start the car. To disable it permanently, you'll need to visit a 4S dealership for settings adjustment. During heavy traffic holidays, turning off this function can enhance driving comfort. Since the start-up is slower, it's easier for other cars to cut in, and the comfort level may decrease. Additionally, it's recommended to turn off this function when starting on a slope to prevent delayed response and potential rolling back.
Was this review help?
12
4
Share
More Forum Discussions

How many cylinders does the Mercedes-Benz C260 engine have?

The Mercedes-Benz C260 is equipped with a 4-cylinder turbocharged engine. Here is some additional information: 1. Vehicle Design: The all-new Mercedes-Benz C-Class coupe features a stylish and elegant exterior, with scratch-resistant paint being a major highlight. The interior design follows the overall layout of the sedan version, incorporating a new steering wheel, a 12.3-inch digital instrument cluster, and a 10.25-inch central control touchscreen. The interior space, especially the rear seats, is relatively compact, but the trunk is spacious. 2. Engine: The Mercedes-Benz C-Class is powered by 1.5T high and low-output turbocharged engines, with maximum power outputs of 156 horsepower and 184 horsepower, and peak torques of 250 Nm and 280 Nm, respectively. These engines utilize direct fuel injection technology, with the low-output version achieving maximum torque at 1500-4000 rpm and the high-output version at 3000-4000 rpm. There is also a 2.0T turbocharged engine with a maximum power output of 258 horsepower and peak torque of 370 Nm. This engine also features direct fuel injection technology, with maximum torque achieved at 1800-4000 rpm, and uses an aluminum alloy cylinder head and block.
3
1
Share

What are the reasons for the Wuling Hongguang Mini's air conditioning not being cool enough?

The reasons for the Wuling Hongguang Mini's air conditioning not being cool enough are as follows: 1. Clogged air filter: This issue is often overlooked by many new drivers. Simply replacing the air filter can resolve it. 2. Dirty condenser leading to poor heat dissipation: The condenser is prone to accumulating dust and small insects. If not cleaned for a long time, the condenser's heat dissipation will be poor, significantly reducing the air conditioning's cooling effect. The dirt on the condenser can be cleaned by rinsing with water, but be careful not to use too high water pressure as the condenser is relatively fragile. 3. Cooling fan not working: A non-functioning cooling fan greatly affects the condenser's heat dissipation. It should be repaired or replaced promptly. 4. Refrigerant pressure too high or too low: Refrigerant, also known as coolant, is the cooling agent inside the air conditioning system. There is a natural loss of refrigerant in the air conditioning system over time. If the refrigerant pressure is too low, the cooling effect will deteriorate. Conversely, if the refrigerant pressure is too high, the air conditioning may cool intermittently. Therefore, the refrigerant pressure must be adjusted to the standard range; neither too low nor too high is ideal. 5. Refrigerant leakage: This situation is more troublesome. Specialized equipment is needed to locate the leak point inch by inch. Common leak points include the air conditioning pipes and the evaporator, which may require replacement of related components.
20
0
Share

Shift Paddles or Neutral First?

Shift paddles first, then neutral. Below is a detailed introduction to car paddle shifters: 1. Function: Enhances driving safety by allowing gear shifts without taking hands off the steering wheel. 2. Usage: Paddle shifters are typically located behind the steering wheel. When using them, drivers usually only need to shift into D, S, or manual mode. With paddle shifters, drivers can upshift and downshift without removing their hands from the wheel. Since paddle shifters are positioned behind the steering wheel, they offer convenience and high efficiency. This system is widely used in rally racing, circuit racing, and even F1 events.
19
4
Share

How to Lift the Wiper Blades of a Sylphy Car?

Sylphy car wiper blades can be lifted by raising them from the windshield. The wiper is a blade structure installed in front of the windshield, consisting of: motor, reducer, four-bar linkage, wiper arm spindle, and wiper blade assembly. Its function is to remove rain, snow, and dust that obstruct the view on the windshield. The Sylphy's body dimensions are: length 4631mm, width 1760mm, height 1503mm, wheelbase 2700mm, minimum ground clearance 166mm, fuel tank capacity 50L, trunk capacity 510L, and the body structure is a 4-door 5-seater sedan.
1
3
Share

Which car has a crown emblem on its logo?

The car with a crown emblem on its logo is the Toyota Crown, a brand under the Japanese automaker Toyota. Taking the 2018 Crown as an example, its body dimensions are: length 5020mm, width 1805mm, height 1480mm, wheelbase 2925mm, minimum ground clearance 140mm, fuel tank capacity 70L, and the body structure is a 4-door, 5-seater sedan. The 2018 Crown is equipped with a 2.0T turbocharged engine, delivering a maximum power of 173kW and a maximum torque of 350Nm, paired with an 8-speed automatic transmission. It features a double-wishbone independent front suspension and a multi-link independent rear suspension.
4
3
Share

Can I install the reversing camera by myself?

You can install the reversing camera by yourself as long as you have a liquid crystal display screen. However, attention should also be paid to the handling of the wiring, such as wrapping the correctly connected wires with waterproof tape, hiding the video cable, and properly managing the main unit wiring. Here is some related information about the reversing camera: 1. Introduction: The reversing camera, also known as a parking assist system, or vehicle backup visual system, or on-board monitoring system. English name: vehicle-backup-camera. 2. Application scope: This system is widely used in various large, medium, and small vehicles for reversing or driving safety assistance.
6
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.