···
Log in / Register

How to Turn Off the Auto Start-Stop Function in CX4?

4 Answers
SanAlyssa
09/05/25 2:05am

The method to turn off the auto start-stop function in Mazda CX4 is: There is an auto start-stop button located on the vehicle's center console. Press it once to activate the auto start-stop function, and press it again to turn off the auto start-stop system. The auto start-stop function in Mazda CX4 is enabled by default. More details are as follows: 1. The auto start-stop button has an "off" label below the symbol, with an indicator light above. The start-stop system is translated into English as: Start-Stop system; 2. When the vehicle is in a stopped state (not in park), the engine will pause operation (instead of maintaining traditional idle speed). During this pause, the lubricating oil inside the engine continues to circulate, keeping the engine internally lubricated; 3. When the brake pedal is released, the engine will restart. Since the lubricating oil has been continuously circulating, frequent stopping and starting will not cause wear and tear on the engine internals.

Was this review help?
13
0
Share
GideonMarie
09/17/25 2:50am

I've been driving my Mazda CX-4 for almost two years now, and the first thing I do every time I get in the car is press the auto start-stop button to turn it off. That button is located near the instrument panel on the left side of the steering wheel, marked with an A and a circle, labeled A OFF. Press it once and the light comes on, indicating it's turned off. I don't like the auto start-stop feature because it keeps shutting off and restarting in traffic, causing severe body vibrations that make the ride uncomfortable. In the long run, the little fuel saved isn't enough to compensate for battery wear—frequent starts on short trips are too harsh on the battery. I recommend making it a habit to turn it off as soon as you get in the car; it saves hassle and protects your vehicle. If you can't find the button, check the manual or look for icon prompts on the center console. Remember, turning it off makes the ride much smoother, though fuel consumption might slightly increase, especially on highways where you might consider leaving it on. All in all, it's a small action that can make driving much more comfortable.

Was this review help?
10
1
Share
Expand All
StArabella
10/31/25 3:21am

Turning off the auto start-stop is easy—just press the small button with the 'A' symbol, usually located near the steering wheel or on the center console. The function stops when the indicator light turns on. I always turn it off for a simple reason: the start-stop system relies on the battery, and the constant engine shutdowns and restarts not only cause annoying vibrations but also affect heat dissipation. It's designed for fuel efficiency, but in city traffic with frequent stops, it's not very effective. Battery health is crucial, and frequent start-stop cycles can shorten its lifespan, increasing replacement costs. If the button isn't working, it might be a fuse issue or sensor malfunction that needs checking. Permanently disabling it via modifications is risky and not recommended. For daily use, pressing the button is the safest and most convenient method—no need to worry about damaging the car's settings; it's easy to manage.

Was this review help?
16
3
Share
Expand All
ORosalie
12/14/25 3:29am

When I first drove the CX-4, I also wondered how to turn off the auto start-stop. Just find the button with an 'A' near the center console, press it once to light up the indicator, and it's that simple to deactivate. The start-stop won't interfere with the engine anymore. New drivers don't need to worry—the button's location is common and effective.

Was this review help?
19
4
Share
Expand All
More Forum Discussions

Where is the air conditioning filter located in the Touareg?

The air conditioning filter in the Touareg is located behind the glove box. If you need to replace the air conditioning filter in the Touareg, here are the replacement steps: 1. Remove the glove box and take off the protective panel below the glove box. Gently pull the panel, as there is a connection wire for the footwell light behind it. Remember to disconnect the footwell light wire when removing the panel. 2. Remove the cover of the air filter by pressing the clips on both sides to take off the cover. 3. After removing the air filter cover, take out the old air filter and replace it with a new one. 4. Reinstall the cover and the protective panel, paying special attention to reconnecting the footwell light wire.
18
1
Share

Is it okay not to apply film on the front windshield?

It is acceptable not to apply film on the front windshield. The front windshield itself has the function of blocking ultraviolet rays, so applying film is optional. If you choose to apply film, it is essential to use genuine products from reputable brands. Low-quality films often fail to meet the required light transmittance standards, which can impair the driver's visibility. Below is some relevant information about applying film to the front windshield: 1. Genuine films from reputable brands tend to be more expensive, but it is advisable not to opt for cheap, low-quality films. Inferior films can release harmful gases when exposed to high temperatures, posing health risks. 2. Before applying the film, ensure the glass surface is thoroughly cleaned. Avoid rolling down the windows or washing the car for a week after application, as this may affect the film's adhesion.
2
5
Share

How often should the brake fluid be changed for an Audi A6?

Audi A6 brake fluid should be changed every 2 years or 40,000 kilometers. The method for changing the brake fluid in an Audi A6 is as follows: 1. First, open the cap of the brake fluid filler port and use a syringe to extract some of the old fluid. After filling with new fluid, lift the car and loosen the brake fluid drain screws near the four tires to allow the brake fluid to slowly drain out. 2. Lower the car and slowly add new fluid to the filler port to avoid air entering the brake lines. When only 1/3 of the brake fluid remains in the reservoir, quickly lift the car again. 3. Tighten the drain screws on all four tires and then lower the car. Fill the brake fluid reservoir to the top and secure the cap to complete the brake fluid change. When using brake fluid, note that different types and brands of brake fluid should not be mixed. If the fluid absorbs moisture or contains impurities, it should be replaced or filtered promptly; otherwise, it may lead to insufficient braking pressure and affect braking performance. If the vehicle's braking shows signs of pulling to one side, it is advisable to replace the brake fluid with a higher-quality product.
4
5
Share

What engine does the Bestune T99 use?

Bestune T99 is equipped with a 2.0-liter turbocharged engine across the entire lineup. The engine of the Bestune T99 delivers 224 horsepower and a maximum torque of 340 Nm. This engine can output its maximum power at 4500 to 5500 rpm and reach its peak torque at 1650 to 4500 rpm. The engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. More details are as follows: 1. The engine is paired with an 8-speed automatic transmission (8AT). The AT transmission offers smoother gear shifts and better reliability and durability. 2. The Bestune T99 adopts a MacPherson independent suspension at the front and a multi-link independent suspension at the rear. As a mid-to-large SUV, the vehicle boasts a bold exterior design and a spacious interior. 3. The dimensions of the Bestune T99 are 4800 mm in length, 1915 mm in width, and 1685 mm in height, with a wheelbase of 2870 mm. The exterior design of the Bestune T99 is very appealing, and the interior design caters well to the aesthetic preferences of young consumers.
2
0
Share

How to clean rust on brake discs?

Brake discs are round discs that rotate as the vehicle moves. When braking, the brake calipers clamp onto the brake discs to generate braking force, slowing down or stopping the vehicle. Brake discs offer effective braking performance and are easier to maintain compared to drum brakes. There are several types of brakes, including disc brakes, drum brakes, and air brakes. Older vehicles often feature front disc brakes and rear drum brakes, while many modern cars are equipped with disc brakes on both front and rear wheels.
17
4
Share

What Causes Squeaky Brake Pads?

The reasons for squeaky brake pads are: 1. The brake pad shims lack lubricant or are improperly installed; 2. Misaligned brake pad installation; 3. Product defects, such as inconsistent friction block dimensions, large metal particles on the surface, unbroken oxidation film, or inferior hard material composition; 4. Initially silent but suddenly noisy after driving - usually caused by small stones trapped in the brake pads. Brake pads (also called brake linings) are critical safety components in a vehicle's braking system, playing a decisive role in overall braking performance.
6
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.