How to Turn Off the Auto Start-Stop Function in Corolla Hybrid?

1 Answers
DiAnnie
07/29/25 5:35pm
Auto start-stop is enabled by default. When the car starts, the auto start-stop system is in normal working condition. To turn it off, simply press the auto start-stop button. When encountering traffic lights or stopping for other reasons while driving, step on the brake, and the engine will automatically shut off after two seconds. Releasing the brake and stepping on the accelerator, or lightly turning the steering wheel will restart the engine. Additional details: 1. The COROLLA HYBRID features a highly distinctive and advanced exterior design. 2. The front fascia incorporates slim LED headlights and 'lightning-shaped' LED position lights, complemented by chrome trim with both glossy and matte finishes, exuding a premium feel. The rear features three-dimensional LED taillights with smoked lenses, achieving a perfect balance between sportiness and elegance. 3. The hybrid-specific instrument panel and gearshift lever highlight the COROLLA HYBRID's advanced and premium qualities. The hybrid-exclusive instrument panel, dedicated center console, and added stitching further enhance the sense of sophistication and advancement. The center console and door trims adopt a black wood grain design, showcasing a high-end texture.
Was this review help?
6
2
Share
More Forum Discussions

What do China 5 and China 6 mean in vehicles?

China 6 emission standards are an upgraded version of China 5 emission standards, imposing stricter limits on the emissions of CO (carbon monoxide), THC (total hydrocarbons), NMHC (non-methane hydrocarbons), NOX (nitrogen oxides), PM (particulate matter mass), and introducing regulations for PN (particulate matter number). Here are a few ways to distinguish between China 5 and China 6 vehicles: 1. The China 5 emission standard is marked with a "V", while the China 6 emission standard is marked with a "Ⅵ", using Roman numerals. 2. The vehicle's nameplate indicates the model number.
16
5
Share

Is the Insurance Cost the Same for 5-Seater and 7-Seater Cars?

5-seater and 7-seater cars have different insurance costs. Below are the differences in insurance premiums between 5-seater and 7-seater cars: 1. Compulsory Traffic Insurance (CTI): This is an annual mandatory payment. For family cars, those with 6 seats or fewer cost 950 yuan per year, while those with more than 6 seats cost 1,100 yuan. 2. Seat Insurance: Also known as Passenger Liability Insurance, 7-seater cars have two more seats than 5-seater cars, resulting in a cost increase of approximately 100 yuan. Additional Information: Below are other differences between 5-seater and 7-seater cars: 1. Space: 7-seater SUVs are modified from 5-seater models by adding an extra row of seats. If you frequently need 7 seats, purchasing an MPV will provide a higher level of overall comfort. 2. Vehicle Body Markings: Enforcement varies by region. Generally, as long as the vehicle is not used for commercial purposes, even 7-seater cars do not need to display markings such as 'Approved Capacity: 7 Persons' on the body. However, in some areas where private cars are often used for commercial purposes, for unified management, these markings may be required during annual inspections.
19
3
Share

What letter represents China 5?

China 5 is represented by the letter 'V', where V stands for the Roman numeral 5. China 5 refers to the automotive emission standard, officially known as the National Fifth Stage Motor Vehicle Pollutant Emission Standard, or China 5 standard. The China 5 standard is equivalent to the Euro 5 standard in the European Union, which has been in effect since 2009. It imposes strict limits on vehicle emissions such as nitrogen oxides, hydrocarbons, carbon monoxide, and particulate matter. Here are a few ways to distinguish between China 5 and China 6 vehicles: 1. The China 5 emission standard is marked with a 'V', while the China 6 emission standard is marked with a 'Ⅵ', both using Roman numerals. 2. Check the vehicle's nameplate for the model number.
5
0
Share

What Causes the Noise Outside the Window While Driving?

Noise outside the window while driving is usually caused by foreign objects like stones stuck in the tire tread. Here is some relevant information about tires: Tires are rubber products, and rubber deteriorates over time with use, so tires need to be replaced periodically. Under normal circumstances, tires installed on a car can last for four years, so it is recommended to replace them every four years. When purchasing new tires, always check the production date because tires also have a shelf life. Normally, unused tires have a shelf life of three years; if they have been sitting for more than three years, they should not be purchased.
13
1
Share

Where is the Cabin Air Filter Located in the Haval H6?

The cabin air filter of this vehicle is located behind the glove compartment on the passenger side. If you need to replace the cabin air filter, you will first need to remove the glove compartment. Below is some relevant information about the cabin air filter: 1. In most vehicles, the cabin air filter is situated behind the glove compartment on the passenger side. For many car enthusiasts with strong DIY skills, replacing the cabin air filter is a very simple task. The cabin air filter is a crucial component of the car's air conditioning system and one that requires regular replacement. 2. The cabin air filter is responsible for filtering the air, and over time, this component can become dirty. Generally, vehicles require the cabin air filter to be replaced every 10,000 kilometers. It is recommended to replace it on schedule.
20
3
Share

What is the Correct One-Button Start Method?

Detailed instructions for the correct start-stop sequence with one-button start: Starting: 1. Step one: After the driver sits in the driver's seat, press the start button once, at which point the ACC light will turn on. Then press it once more, and the vehicle will perform a self-check. 2. Step two: Press the brake pedal and press the one-button start key to ignite and start the engine. 3. Step three: Release the foot brake. You may choose to warm up the car in place, with the duration depending on the environment. 4. Step four: Press the foot brake again, shift to D gear, and release the handbrake (for electronic handbrakes, simply press the button briefly). 5. Step five: Slowly release the foot brake, gently press the accelerator, and the starting process is complete. One-button start model parking method: 1. Step one: Press the brake pedal and bring the car to a smooth stop. 2. Step two: Shift the gear from D to N and tighten the handbrake (for electronic handbrakes, pull up). 3. Step three: Continue pressing the foot brake and shift the gear from N to P. 4. Step four: Release the foot brake, press the one-button start key to turn off the power, and the parking process is complete.
3
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.